The rfxcom manager application suggests that fan2 and fan3 share a byte. Are you sure Leonardo that these are seperate bytes?

Home assistant recognizes the select switch without issues

I am using today's domoticz beta on RPI 3B+, to check if this issue resolved. mosquitto : latest version 1.x My ESPhome devices has switches (succesfully auto discovered) and a selector switch. MQTT explorer shows the selector switch as follows: {"ops":["one","two","three"],"name":"Template select ...

I have an espeasy co2 sensor. Mqtt. Autodiscover.

It gives errors though, in 2022.1

Any suggestions?

I read up on the mqtt auto discovery on the wiki pages.
A quick question, is it still necessary to do the “install software” part with mosquitto?

Thanks waltervl, I’ll give that a try.
If someone has a solution to update a hue scene, then that will relieve the burden on domoticz.

You are describing my previous solution, which has worked well for years. I had three scenes, and the appropriate scene was selected in a selector switch device. The selector switch determines what scene is activated when the room is occupated. I have a dzvents script that gets input from door and ...

A hue scene is a switch device in domoticz
Updating a hue scene isnt a function in domoticz, so yes, im am guessing a http command

Hi all, Use case: When a room (Huiskamer) becomes empty, all lights turn off When a room is reentered, lights turn on All room lights are controlled by the hue bridge hardware, connected to domoticz Problem: Simply Switch off the Group Huiskamer when empty and Switch On when occupied does not work ...

I solved it on my part
The idx of the siren in domoticz = 1
The idx of the zwave node is 019/0x13
It worked when I used idx = 7

I found it by using the chrome developement tool, when changing a parameter (network tab, shows the json url when hitting “pas configuratie toe” in de openzwave tab

Can please share your script? I am struggling.
Did you update that file? Where to download that file?

Thanks! Works like a charm.

Do try 127.0.0.1:8080 as the url

I have the same issue. Did you make advancements?

I have domoticz, latest stable, and just acquired a nodo-shop opentherm gateway with LAN interface. All works as expected. I can send commands through the hárdware menu and have 28 devices Is it possible to programmatically send commands like SW=65 to the gateway with lan interface? like for example ...

I have domoticz running on a raspberry pi
Evohome and hgi80

Is there any way to broadcast a dummy relay to the evohome controller?
My idea is to reuse 3rd party radiator thermostats to work with evohome.

Ive been searching but havent found clues so far.

Thanks, this helped me

Raspberry pi 3 Problem : I want to isolate the domotica network from the regular network used for internet browsing. For security reason I still want to control domoticz by smartphone, not using wifi. My idea is to control domoticz by smartphone using bluetooth. Has anyone any suggestion to help me ...

emme wrote: ↑Friday 22 June 2018 10:17 )MQTT is a REALLY good solution and widely open to almost everything!!!

I am really interested in your detailed approach!

How do you differentiate between lux devices that way? As well as computers or phone