Hello,

Devices 43 and 44 are your fibaro's sensors (their ID's are 000002xxx, and 2 is the fibaro's node number).

Regards,
Stéphane

Hello, There seems to be a "transfer primary controller role" feature in Dz. But in your case I wouldnt do that, because if this ends up transferring the messed-up network config from your old to your new controller, this wont be much of a progress. Even if this sounds very boring, I would advise to ...

Hello,

Indeed, fixed in 4312.

PS: the selector switch is not available in the current stable version, you need to switch to beta.

Regards,
--
Stéphane

Hello, I have updated to current beta (4298), and my selector switches no longer work: selecting any level no longer activates the blocky events, nor changes the level in the selector switch itself. I have created a new test selector, with everything set per defaults, doesnt work either. Let me know ...

Hello,

As said on thr french forum, it is the one ending in 1, so 301 in your case.

Regards,
--
Stéphane

A complete fix here :

viewtopic.php?f=31&t=7956&p=71408#p71408

Regards,
--
Stéphane

Ok, found why the "Mode" (Off / Auto) parameter is visible in OpenZWave control panel but not in domoticz, preventing turning to Auto from domoticz. Just remove those 2 lines from domoticz/Config/qubino/ZMNHIA2.xml: <!-- Remove COMMAND_CLASS_BASIC --> <CommandClass id="32" action="remove" /> Then ...

Hello,

I suggest a cause and a fix for your problem there:

viewtopic.php?f=31&t=7956#p71252

Regards,
--
Stéphane

Hello, If the ZMNHIA2 behaves the same as my new ZMNHID1 (the ZWave Plus equivalent of the ZMNHIA2), then the problem is that domoticz does not expose the "Mode" parameter of the thermostat. This parametr can be set from the openzwave control panel, which you can access from domoticz's zwave setup ...

Did you try to delete the cache file, like I suggested in my last post ? This is totally harmless and will force domoticz to query the actual topology from the network.

Regards,
--
Stéphane

Please start by deleting the domoticz/Config/zwcfg_0xyyyyyyyy.xml ZWave configuration cache file, restart domoticz and force a network heal.

Then post the picture again.

Regards,
--
Stéphane

Hello, Up or down doesnt matter, what matters is parallel to device antennas. As for device positions, imagine the radiation pattern being a donut centered on the antenna, with almost no signal at all both above and below the antenna. A viable alternative is to multiply the devices, with random ...

Hello, In order to maximize zwave reliability (and this also stands true for other 868 and 433 MHz networks like EnOcean and RfxTRX etc.), you should try to align all antennas this way: The RF field emitted by the 1/4-wave abtenna of your zwave stick (and your zwave devices) has the shape of a ...

Very much so, indeed ! Good find :) With "Radiateur rdc hall" being the dimmer setpoint of a Qubino ZMNHJD1 ZWave pilot wire controller, and "Radiateurs rdc" being the virtual selector switch set with the 6 "pilot wire" possible values: http://s.guillard.free.fr/Domoticz/rads.jpg ... and the blocky ...

Hello,

Did you work on this? Or find a solution?

I am also using the Fil Pilote Qubino modules, and intend to make a discrete-values dimmer UI object if noone has made one.

Regards,
--
Stéphane

Hello, If you are able to commile Domoticz yourself, then just add the new 0x046 / Nodon line in the manufacturer table in Hardware/EnOceanESP2.cpp between 0x041 and 0x7FF, like below: { 0x041, "AIR_SYSTEM_COMPONENTS_INC" }, { 0x046, "Nodon" }, { 0x7FF, "Multi user Manufacturer ID" }, Then recompile ...

Replying to myself again, Forget it, i've made it to work. The Siemens website which states that the measurement range is 0 to 50°C is wrong, it is 0 to 40. The issue is that domoticz does not handle the "variations" of the Teach-In message sent by the remote units when their Learn button is pressed. ...

Replying to myself, The sensor VERY LIKELY has a 0/40 range and not a 0/50 as shows on the web product page. I have done several comparative measurements today, and the hex data byte value from the domoticz log matches the temperature measured with another sensor when scaled to 0/40. So i guess ...

Hello, I am running the current stable release on a Pi B, and newly experimenting EnOcean with an ESP3 EnOcean USB stick. For the moment, i only have a single temperature sensor, a Siemens QAX95.4. It is a 0 to 50°C room sensor, which is stated here : https://mall.industry.siemens.com/mall/fr/WW/ ...