So I am left with two issues: - why are no devices created in domoticz for the devices that zigbee2mqtt recognizes? The Domoticz plugin for Zigbee2MQTT has to support the device, in addition to being supported by Zigbee2MQTT - how can I get the power block configured that it shows up as 3 separate ...

lsb_release -a will show you the version of OS - look at the Codename: Check out the post https://www.domoticz.com/forum/viewtopic.php?f=3&t=32372 If you are running Debian/Raspbian/... please not that old versions are NOT supported anymore, you need to upgrade your system to Buster! (There are ...

Are you running Domoticz on Windows or a PI because you start talking about upgrading on Windows and then switch to talking about Raspberry What version are you now trying to run and if you are running it on a Pi you did upgrade the Pi to Buster as the latest version of Domoticz won't run on ...

Under Settings | Hardware do you have a device OpenZWave USB with a setup button next to it, if yes then click on Setup, Node Management top right and select Include Node and pair the wall plug

I use a D1 mini with Tasmota along with MQTT and Node Red to get the data into Domoticz

I've used DH22 for Temperature and HC-SR501 for motion but you have to keep this device some distance away from the D1 because of interferance from the D1 mini WIFI

Which version of Raspbian is running on your Pi 3 as a Pi 4 needs Buster If it has Buster on it then it should be able to moved to the Pi 4 If it is older than Buster I'd make a backup copy of the SD card and upgrade the backup card to Buster while running on the Pi 3. Don't do anything without a ...

Rolandet wrote: ↑Wednesday 27 May 2020 22:26
I'm running into a little weird thing with that ookla version
Somehow the cronjob runs, but it doesn't update the output file nore my devices in Domoticz
Anyone have the same issue?

Does it update the file and sensors if you run it manually

jake wrote: ↑Monday 18 May 2020 23:39 Same problem, only loading...

Have you tried enabling accept new hardware devices in Domoticz settings

I just use DEFAULT as the server name

Glad you got it sorted

For the future in both Chrome and Edge

Go to the site you want to clear the cache on

on the burger menu, More Tools, Developer Tools

right click on the page refresh button next to the back forward buttons and select empty cache and hard refresh

Until you fully clear the cache/site information those buttons will be missing - had the same issue

ok! that's it! try modify file in /templates/zigbeemap/zigbeemap.html and change <script type="text/javascript" src="/js/jquery-3.4.1.min.js"></script> to: <script type="text/javascript" src="/js/jquery-3.3.1.min.js"></script> That solved the issue for me https://i.imgur.com/bf1ZX3v.png

Domoticz 4.10717

I can see raw.json gets populated

However the custom panel under Zigbee is blank

As the provider recently upgraded my "Download" speed from 100 Mbps to 200 Mbps, my Raspberry Pi 2B throttled the results. I installed The Ookla Speedtest directly on my router/gateway and pushes the results with MQTT to Domoticz. If someone is interested in the solution and the simple Node Red ...

I use the cheap Wifi sockets that you can get on Amazon, making sure they can be flashed with Tasmota Then flash a Domoticz compatible version of Tasmota, setup a dummy device on Domoticz and add the device ID to the Tasmota flashed Wifi socket, controllable from Domoticz, with power monitoring and ...

The Xiaomi Aqara curtain motor is supported in zigbee2mqtt, however it is not supported in the Domoticz plugin as far as I can see, even though there was a request for it over on Github back in July

Hi I don't understand the error I get when I'm running get_dps for a plug Unexpected status() payload=b'\xa1H;\xd5\n\xadT\x9b\xc7^5A\xb5\xc3-\x1d\xe8T\xe0\xe6\xdb\xa3\xac7\x96i\x1d\x837&\x91\xc3' Plug State Information: b'\xa1H;\xd5\n\xadT\x9b\xc7^5A\xb5\xc3-\x1d\xe8T\xe0\xe6\xdb\xa3\xac7\x96i\x1d ...

Did you read the manual, page 20

Add the new device with a new name, you will have a new idx value

On the old device edit | replace, and select the new device

All the history will transfer

Remove the old device from setup | devices

Rename the new device with the old name

bmat wrote: ↑Tuesday 02 July 2019 10:23 As Orsa, I got no more camera view working within domoticz app. Issue appears after a domoticz upgrade to V4.10717.

Now working in the latest version of the app

Working in the latest update to the app