Read my post.
viewtopic.php?f=44&t=19294

Hi. I have FS1000A and it does not always works. I have tested it with 10;FA20RF;2c791a;1;ON; and it sometimes works and sometimes not. I have tried with external antenna and it is the same. Could it be that I have some fake/bad FS1000A module? Have ordered 5 and they are all the same so it is not ...

I have few of those sensors and i like them since they do not have the display so i van calibrate them snd it does not look confusing when display and reported info are not the same. Digoo DG-R8H: https://www.banggood.com/Digoo-DG-R8H-433MHz-Wireless-Digital-Hygrometer-Thermometer-Weather-Station ...

For those who have only L inside the light wireing like myself, you can use these switches to turn light on and off. It has three options to control learn it. On option is to use the same button for on/off (which is annoying since you can not know in what state it is atm) or program one button to ...

So these are made for traditional wire and not like sonoff? So it is usable for wireing with only 'live' wire? How did you achive that because SonOff touch has mandatory for Live and N wire to be present? Since you have a lot of knowlage would it be possible to mod ordinary sonoff touch to use only ...

Hi. I would also like to know that. TNX

Hi. I want to achieve that the doorbell will start to ring after the door sensor is opened for more then 20 second. It must to continue ringing every 20 seconds if the door is not closed. If the door is closed before the 20 second it must not ring. The script below works but it rings even if you ...

I want to send a custom signal to one doorbell since recording the switch does not transmit the right signal. I can trigger the doorbel with rfxmngr and now i want to add this signal as button. Is this possible at all? ================================================ Lighting4 command ...

Yes we know that, but we are also testing some others models.
Would it be possible to change only the transmitter part and will it then work or not? Probably not?

I know have also those and they do work. This one works with RFLink so I hope that they will be able to also added it into RFXtrx. I have also purchased this one: https://www.banggood.com/Digoo-DG-R8H-433MHz-Wireless-Digital-Hygrometer-Thermometer-Weather-Station-Sensor-for-TH11300-8380-p-1178108 ...

This sensor does not work with rfxcom 433E receiver.
https://www.banggood.com/Digoo-DG-R8S-4 ... 39603.html

There is one problem. I want the code/rule to change the status of touch also if the relay status changes to the same status as relay is in. This is because if you remote execute the code: http://ip/control?cmd=GPIO,12,0 Only the status of the relay changeses. The status of the touch stays in this ...

Just tested Kerui P829 motion sensor. https://www.aliexpress.com/item/KERUI-P829-Wireless-PIR-Motion-Detector-for-G18-G19-W1-W2-Home-Alarm-System-Smart-Home/32682326404.html Some additional photos: https://fccid.io/2AGNGKR-P829 It works with domoticz. It reports also with X10 and lightning4 enabled ...

Have got this sensor https://www.banggood.com/Digoo-DG-HOSA-433MHz-Wireless-Water-Leakage-Alarm-Water-Level-Detector-for-Home-Security-Guarding-p-1178109.html?p=8H180110948532015010 It can communicate with Lightning4 and X10 protocol. Below you can see the logs from RFXmng. Basically upper button ...

Hmmm. I am looking to buy the same siren. Just thinking. If you would also purchase compatible remote control you could program siren to turn on and off with remote. After that you would create a switch in domotics with recording keypress on remote for arm and disarm. After that you could use blocky ...

Hmm. Is seems that it is domotics bug. As it lists as only one status. Will investigate further. Status in rfx is: ------------------------------------------------ 31. 08. 2017 09:00:57 ------------------------------------------------ 31. 08. 2017 09:00:58 Packettype = Security1 subtype = X10 ...

I was testing D026 sensor with RFXTfx433E (1020) and if i enable only lightning4 protocol it receives open, close and temper signal but no battery status. If i enable also x10 and lightning 4 protocol all three (open, close, temper) are sended as one signal, which is kind of not usefull. 31. 08 ...