Hello, I am using the plugin Evohome via LAN. Sometimes when I change a setpoint from for example 17 degrees to 18 degrees, the setting is changed in the WebUI of Domoticz, but not in Evohome gateway (and also not in the Evohome cloud). When I try it again it often does work. Anyone also is having ...

Same problem here, WSDCGQ11LM only recognized as barometer when adding it to Domoticz, however the temp and humidity is shown at the data column when you click on device overview.

You can read the data from the sensor with http://IPADRESS/json.htm?type=devices&rid=IDX

is the Plugin Version 3.1.0.-beta working ok with the newest Domoticz version?

maybe it is an option to remove the plugin and switch to MQTT Autodiscover, which is available in the latest Domoticz version. Solved some of my issues I had with Zigbee equipment

Hi I am trying to switch from RTF433 to Zigbee. I am using the cc2531 stick and zigbee2mqtt. So far I paired an Ikea E1603 wall socket. That worked after a few tries. Altough, the router from it appears as, -------------- {"type":"response","requestid":3,"isError":false,"payload":[]} Last seen ...

I have this up and running, do you still need help? I have the HGI80 on a rasp pi in the middle of my house (where the hgi80 gets good visibility of devices), and have installed ser2net to gate the serial port to an internet port. I have added a line to the config file /etc/ser2net.conf (removing ...

My Domoticz timezone and Evotouch clock are both correct, so it's not that. There really is a discrepancy between the json returned from a rid= call to an Evohome zone idx and what the widget displays. The temps and modes are all ok, it's the 'until' field that's off. Try it yourself and see if you ...

Hello, Just added a Xiaomi Gateway to Domoticz. It seems to work fine, however when I press a switch connected to the XIaomi Gateway, it will take up to 5 or 10 seconds, before the switch is turning to state "on" in Domoticz. When I add an action/scene in the Xiaomi App, the response is within 2 ...

gordonb3 wrote: ↑Wednesday 24 January 2018 10:47 I guess the only way (at this time) is to run a timed script in which you retrieve the current status of a zone and act depending on its value.

Thanks, do you have a small example to read out the status of a zone?

Not so much of an answer, but Domoticz does not see Evohome zones as temperature sensors. They are registered as heating devices and it would appear that this device type is not implemented in the event system (Blockly/LUA). Hello, Thanks, but how can I use the temperature from these zones as input ...

Hello,

Does someone have this firmware file:
ti_usb-v10ac-p0102.fw

I already have ti_3410.fw, but the logs are keeping asking for ti_usb-v10ac-p0102.fw

Many thanks!

Anyone?

Hello, Why aren't my temperature sensores from the Honeywell Evhome HGI80 available in Blockly? I know I can use JSON to control the zones/switch etc, but what if I want to react on a temperature value of a certain zone? For example when it is higher then 20 degrees, the fan should be turned on. I ...

Hello, Just tested this, same here. I have a other issue with the time. When I look at the devices/setup, I see this data at a specific zone with an override: 17.6 C, (12.0 C), TemporaryOverride until 2018-01-16T23:30:00 When I look at the dashboard, I see that the override is until 2018-01-17 00:30 ...

Hi, I already use Kaku Awst-6000 switches to detect if a door/window is open or closed. Is there perhaps a way to remotely check if a door is locked too? (But I don't want a new lock. It has to be able to check an existing lock) Txs. Is there perhaps a way to remotely check if a door is locked too ...

philchillbill wrote: ↑Saturday 06 January 2018 21:00 No USB problems for me with an HGI80 on an Intel NUC running the latest Ubuntu. I do have a rules file applied to give persistent port names.

Thanks for the reply, I also have persistent port names, but that is not the issue. The issue is with detecting the USB device.

Hello, Tested it on Debian Jessie and Stretch with both the default kernels, both the same problem. I only see this with "dmesg", is it possible I need "ti_usb-v10ac-p0102.fw", where can I find it? [ 254.679491] usb 3-1: new full-speed USB device number 3 using vhci_hcd [ 254.803582] usb 3-1 ...

Hello, I connected a Honeywell HGI80 to a Linux Debian system (not Raspbian), I loaded the proper software (ti_3410.fw) into the /lib/firmware directory. I also added a file into the /etc/udev/rules.d/ directory, containing the information below: -- # Rules for hotplugging Honeywell HGI80 USB device ...

@jenssen Hi, I can confirm that I've not experienced this problem with the latest Domoticz beta code since late last year (I run and test Domoticz on Linux & Windows 7 and compile the latest beta code every 2-3 months). I didn't make any updates to the Domoticz code to fix the problem, but it ...

Hi, Unfortunately still no fix yet for the Domoticz Evohome commands failing problem. I've replicated the problem in Windows and on a Pi, but the variable amount of time for the problem to occur (between a few hours and many days on my systems) means that the troubleshooting is taking a very long ...

Thanks for the feedback