Is there a way to change the "Last 24 hours" view from "1 hour" blocks into a "per 5 minute" graph like Power monitoring? Example: https://i.imgur.com/i01dLJl.png you can export your data to an influx database and use grafana to create some cool graphs! Hi Trigun, i'm aware of this but i would like ...

Is there a way to change the "Last 24 hours" view from "1 hour" blocks into a "per 5 minute" graph like Power monitoring?

Example:

Did anyone have success to get this working on an Avanta V1 (P3)?

[...] Hey Jeff, Do you still have this issue with your V200+PR6P? I was considering this solution. but not if I might get those errors. Thanks! Haven't been active for a while... Currently rebuilding domoticz from scratch since it got corrupted. Expect to have a answer to this in the next few hours ...

Hi Guys, I bought the Qubino Flush Shutter DC (12/24v) https://qubino.com/products/flush-shutter-dc/flush-shutter-dc-tech/ I've set it to "1 - venetian mode (up/down and slate rotation)" It's working, but the Devices are not added correctly. (even after changing the settings, excluding the device ...

I will contact them, would be great.
If someone else has ideas, please let me know

Hello, Which 433 MHz receiver do you use? If you check e.g. the compatibility guide of the RFXCom transceiver, you will find that the Ferport TAC 2 KR is not mentioned in the compatibility list. Check the compatibility list of your 433 MHz receiver first. For 433MHz there exist numerous different ...

Hi there, I have the following project i'm trying to get working. At the moment, i have a 433Mhz parking rolling bar which i would like to control via Domoticz. When i use my Pi and a 433Mhz Receiver to receive the sending remote, it does not receive a code or reply. Simply using a KlikAanKlikUit ...

that's a rolling code remote... (and some times vendors user specific protocols) quite difficult to say if there are comptatibilities you'd better use a remote and wire an ESP8266 to those contacts to use it ;) ;P Hmm, that's not the answer i was hoping for :lol: But will try the ESP8266 method ...

Hi everyone, I currently have a parking rollbar, which is controlled by the following remote: FLY 802 http://www.armas.it/EN2014/ComponentiPerAutomatismi/TelecomandiFLY.html Does anyone know how i can figure out which (trans)receiver i can use to add this device to my Domoticz? Kind regards, Justin

Choices in domoticz selecting serial port are: /dev/serial/by--id/usbFTDI_FT232R_USB_UART_AK3J2IRW-if00-port0 If i'm correct, this one should be the P1 cable (got the P1 WiFi now) Just to help you further: - What version of Domoticz are you running? - Did you restart Domoticz (or your Pi) after ...

Hi there, Some are having the same issue, see https://www.domoticz.com/forum/viewtopic.php?t=18793 Like they tell in this topic, you'll need to manually install it. (link in the topic is outdated) Pi: wget http://ftp.nl.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb sudo ...

Hello all, I've just received my Jetson Nano and finished building/compiling Domoticz per instructions on the wiki . This look promising! Do you have it working without error already? Planning on ordering one to sometime soon. Mosquitto is primarily used for the Zigbee2MQTT function if i'm correct ...

Anyone who can help me migrate this data?

Hi there, I used the P1-USB for 2,5 years and replaced it with the P1-WiFi Gateway. Would like to migrate the data, which my P1-USB collected, to my P1-WiFi device so i habe all the log data in one place and can safely remove the P1-USB device. So, does anyone know how i can migrate my P1 USB data ...

If you need to copy the SD card to a microsd, this can be done with Win32Diskimager. First "read" the SD card to do a backup, then restore it on a microsd of the same (or higher) capacity. Olivier Does this work without any other step's needed? - Like formatting the new microsd card first ...

they both use openzwave so I dont know how one device supports more than the other, care to enlighten me? they can work around eachother, just good practice to not put them on top of eachother for RF's sake. Cannot find the webpage anymore. They were telling the RazBerry had more devices support ...

Aeon Labs Aeotec Z-Wave Z-Stick, Gen5 Z-Wave Plus - See if they have a European version of this, I dont know for sure but I think they do. Works with Domoticz, Gen5 Compatible, USB so it'll work on any hardware and with an extension cable if you want to locate the transmitter and pi in separate ...

Hi there, Since i'm interested in both 433mhz and 868mhz frequency i searched the internet about the hardware I have already bought a RFXcom433E and it's working fine on my Raspberry Pi 2B However, i have the following questions: - Would buying a Razberry (Zwave 2.0) daughter board be a smart move ...