Flush Shutter DC issues

[Justino]

Hi Guys,

I bought the Qubino Flush Shutter DC (12/24v)
https://qubino.com/products/flush-shutt ... r-dc-tech/

I've set it to "1 - venetian mode (up/down and slate rotation)"
It's working, but the Devices are not added correctly. (even after changing the settings, excluding the device, wait 30 secs, including the device again)

I'm getting the following Devices:
Switch
Level
kWh Meter
Unkown (Electice usage)
Switch

The level switch is working most of the time, like on-off but the function seems off.
I would like to see a Up, Down and Stop button instead of the slide bar, like shown on the Qubino website.

https://qubino.com/products/flush-shutt ... r-dc-tech/ (Under "Parameter no. 71 - Operating Modes")

Does anyone know if this is possible, or atleast remove the level bar?


Also getting this error:
2019-08-12 13:01:18.504 Status: OpenZWave: User Alert - Manufacturer_specific.xml out of Date
2019-08-12 13:01:18.504 Status: OpenZWave: Received unhandled notification type (30) from HomeID: 0, NodeID: 0 (0x00)
2019-08-12 13:01:18.504 Status: OpenZWave: User Alert - Manufacturer_specific.xml out of Date
2019-08-12 13:01:18.504 Status: OpenZWave: ManufacturerSpecificDB Ready
2019-08-12 13:01:18.637 Status: OpenZWave: Driver Ready