Which version of DSM are your running on your Synology...... 6 or the new 7 ? I’m running DSM 7, 7.1 update 3 to be precise. I know they removed the usb drivers in dsm7 but there are some people, like Jadahl, who made the drivers available again so I tried to use that without any succes. Are there p ...

Hi all, I have Domoticz running on a raspberry pi 4 for a long time now. I have a Z-wave and a Zigbee stick running with that. Now id like to switch to my Synology 920+ to run my Domoticz in a container but i cant get my Aeotec Z-Stick Gen5 to work on my synology. I used the drivers (cp210x.ko ...

I’ve been trying to switch from my pi to the synology docker but I experience a lot of problems. Domoticz itself runs fine but my Zigbee devices don’t. For Zigbee I need an MQTT container, zigbee2MQTT container and the python plugin. What works is adding a Zigbee device trough the plug-in in Dom ...

Its been awhile but i started my dashticz hobby again and i have a problem with the new way of the calendar.
is use to have this code that worked fine.


Its working again, must have had a typo, tanks for this great project

Hi, im trying to reinstall a new Domoticz with curl -L https://install.domoticz.com | bash but I. get this error. ::: Destination folder=/home/pi/domoticz --2021-02-03 21:11:41-- http://www.domoticz.com/download.php?channel=release&type=release&system=linux&machine=armv7l Resolving www.domoticz.com ...

I am new to VSC and i cant get it to work, same error as above. I tried to download the missing zip and put in the folder without luck, same error. Can’t figure out what the error means, probably missing some extensions. This is the error I get. Executing task: C:\Users\jolan\.platformio\penv\S ...

I bought a pair of eurotronic spirit z-wave valves and i experience a lot of problems. The first one was broken after a week, motor didn't work anymore and was replaced. The batteries of the valves drains in 4-7 days is this normal? 1 valve resets itself every night, not usable. Is anyone using ...

I can't seem to change the dial color ring primary and secondary if i use some specific code. If i use the standard code like this i can change the color in the custom.css blocks['Gang_boven2'] = { idx: '335', title: 'test', type: 'dial', width: 6, showring: true, temp: 345, flash: true, shownumbers ...

The dial function works great i only have 1 issue. On the thermostat dial i can not change the icon, there is a calendar icon now and i like to change this. How can i get this to work, on the other dials i can change the icons as stated in the wiki. I also would like to add an third value to my ...

The dial function works great i only have 1 issue. On the thermostat dial i can not change the icon, there is a calendar icon now and i like to change this. How can i get this to work, on the other dials i can change the icons as stated in the wiki. I also would like to add an third value to my ...

stack wrote: ↑Friday 11 September 2020 15:08 motion detection is an addition to this doorbell.
This goes via motioneye and it gives a telegram message with a screenshot when there is movement.

Can you share this code?
Im using the V1 and it works great but id like to try this motion detection addition also.

There is something wrong at the side of buienradar, the api.buienradar doesn't work, it also doesn't work if u use the url in a web browser. This url does work https://gadgets.buienradar.nl/gadget/zoommap/?lat=52.63167&lng=4.74861&overname=2&zoom=6&naam=alkmaar&size=3&voor=0%22%20scrolling=no ...

There's also a Wemos D1 mini PCB shield you can buy that has connections for RGBW type strips... Only need to solder on a few transistors, resistors, capacitors and a single voltage regulator. You then stack it on top of the Wemos D1 mini that has Tasmota on it... .. Well, that too is way out of my ...

I can't get this code to work if i use the prefix for [data-id='temp_hum_baro'] a specific dial it does work.
So i want to use 1 piece of code to change all the needles.

I had somewhat the same thing only I use the combine option and now I get the dew point as extra in my block while I only want the temp and moisture percentage in 1 block. Is this still possible in some way?

clinkadink wrote: ↑Sunday 07 June 2020 11:36

gielie wrote: ↑Friday 05 June 2020 22:52 How do I get an temp/hum sensor in the dial button and is it possible to get an degree icon and an decimal in the dial?

Like this?

This looks really nice, if this could be implemented.

my code would be this [data-id='Toon2'] .dial-menu li:nth-child(1){ display: none; } but this has no effect Works for me. Yeah for me too now, had an curly bracket too much But now, How do I get an temp/hum sensor in the dial button and is it possible to get an degree icon and an decimal in the ...

I like how this is now for the Toon. :) I've got Toon setup with dummy-devices already, so it should work (I hope) Screen Shot 2020-06-03 at 09.55.49.png Is it possible to hide the OFF? This is also hidden in the Domticz switch. You can try adding this to your custom.css, replacing it with your ...

EdwinK wrote: ↑Wednesday 03 June 2020 9:14 I like how this is now for the Toon. I've got Toon setup with dummy-devices already, so it should work (I hope)

Screen Shot 2020-06-03 at 09.55.49.png

Nice one, I made this one too In my system, but.

Is it possible to hide the OFF?
This is also hidden in the Domticz switch.

I have a problem with the new way of showing a security cam. In the previous versions I used this code buttons.mycamera2 = {width:12, isimage:true, refresh:2500, btnimage: 'http://Admin:[email protected]/tmpfs/auto.jpg',slide:6} But in the new beta this code doesn't work anymore, I only get an ...