Was having a think moment. Yes that is how it's worded and my understanding of it. I have changed all the settings and this is the result. I changed parameter 66 to 1s the the dimmer responds immediately however when it's set to anything else it takes ages to respond. However I can't then use the ...

You have got to be kidding me. That doesn't read like that to me. That reads as:
65: Initial start. As in single press of i1. Not with a controller.
66: when using the button

Can't check until later but if that is the case I'll be v happy. 1 year and I never changed that setting. Good god

Hi egrigius, I think that would solve the issue as I have done that in the past. I'll check when I get home. However by changing the 'time of dimming on button pressed" I am no longer able to manually set the dim level using the momentary switch which is what I am after. I think what I have realised ...

And I've turned off all the power reports

It's mainly. Well always with the qubino dimmers. It's hard to explain but basically imagine setting the dim level as 10% increments with a 0.5s delay in between. Also the mode response time in the zwave control panel is sometimes at about 900.

So after some frustrating days I have found a fundamental flaw with using zwave with domoticz and OZW. When I send a value to a dimmer, for example, set 50% why does it take so long to change to 50%. Sometime up to 5 seconds. I've tried every setting I could find to change this and just assumed that ...

I am ripping my hair out. I had a perfect dzvents script that would turn down a light to a dimmed value dependent on the time of day if it was set to a value higher than that. However I managed to delete all my devices and events (don't ask) and I can not re-write the code. Can someone tell me what ...

Hi Dave,

Did you get anywhere with this.

Nick.

Sent from my SM-G9650 using Tapatalk

Hi. I have 10 thermostats in my house and stumbled across this forum post. Well done for making this work. I just wondered if you have found any other way of integration with domoticz. Creating 30 devices seems pretty time consuming and I'm not a genius at programming. I've got about 10 dzvents ...

Hi, So I am not the greatest coder but have been really getting my teeth into the DzVents stuff. I thought I'd have a go at setting a mood button that cycles through moods. In essence I now have 2 buttons in my lounge. One for setting moods and the other for turning everything off. I figured that ...

Oh my word. Under my nose all the time. I have just found the reference and will update this feed when I work out how to achieve what I am trying to do. Thanks again. Top man

I am trying to control my squeezebox players. I have installed the LMS hardware plugin and that works for turning the players on and off with a script or blockly. However I am trying to be more creative. What I want is to make a scene that is excecuted by a button push that plays the radio, at a set ...

Great. Thanks Epierre. I'll give that a go when I get home. Was delighted to get it working at all. It turned out that the "-" was different. So when I cut and pasted the code I got it working.

Sent from my Nexus 5X using Tapatalk

Ignore the post above. I finally got it all working.

I am now trying to setup imperihome for external access and do not know where to start.

Do I need to setup a nginx proxy or can I just port forward like in domoticz.

Regards.

Hi. I have searched the forum for hours. I can't complete the install. I get stuck on the install the software Debian package. How do I run this. wget -qO - http://www.e-nef.com/domoticz/mdah/gpg.key | sudo apt-key add - sudo vi /etc/apt/sources.list Is this 3 separate commands to run. ? I have ...

I have exactly the same problems.

Oh my word I have spent hours trying to get this working. Please can someone help me setup this camera in Domoticz. I have tried all the URLs listed in the ispy database but I cant get this camera to work.

Tenvis 3815HD

Hi, Is there an easy way to get LUA code to evaluate when the last time a switch was pressed. I currently have a Qubino module to activate scenes but want to set a scene if I double click the secondary input button instead of single click. That way I can set a different scene with the same button. I ...

I have 4 ZMNHDD1's and the s2 and s3 inputs are not fully supported. I have a work around for that but I wish I had installed the non plus ones as they work perfectly

Sent from my Nexus 5X using Tapatalk

So this is my first attempt with LUA. I haven't done any programming scripts since university and that is going back some years. But it works. I forgot how satisfying it is when a script runs correctly but it works anyway. All I wanted to do was set a scene with 1 button on a Qubino module, cycle ...