Unfortunately info for Waardlanden (Alblasserwaard) still isn't working with this fix. Info stopped coming in a few weeks ago. I only replaced index.php and reloaded Dashticz in the browser. Will try to restart my rasperry pi; maybe then it 'll work

Nice! I was planning on something like this in Python as well, but you are a few steps further. A few things I was thinking of, aside from simulating one or more virtual batteries:
creating an email every day after 15.00 with optimal time to run the dishwasher (cheapest 3 hours during the night ...

Search for entsoe on the forum and find a working script for pulling in the future prices in Europe


Yes, I wrote that script to load the prices (onto historic variables) and use them for energy cost calculation, but I also found there is not a good device in domoticz to load the prices onto ...

I am a happy user of Dashticz and want to display in a chart the energyprices for the coming 24 hours. This makes it easier to decide to what time the timer of the dishwasher and other systems should be set to. I am working on a Python script and have the prices already in a list. The question is ...

https://www.vermail.nl/tmp/Knipsel.JPG
My log shows an error, while the calculation seems te be done just fine. Any ideas?

The code I use:
--version 0.1 02-04-2021: dzVents version of solar battery script
--version 0.1.1 03-04-2021: fix left behind variable and avoidance of power level > max ...

As some people in our household tend to forget putting off the panel after usage :?, which is switched on/off by a switch that's also controlled by Domoticz , I am using this script as a backup-measure:

-- script_time_infraredpanel.lua
t1 = os.time()
s = otherdevices_lastupdate['Badkamer ...

Fixed it. It was a typo: I had named "Daikin Zet Temperatuur" wrongly to "Daikin Zet temperatuur"

I have a Thermosmart and Honeywell running together, works fine of course. I had lots of trouble with the Thermosmart (couldn't log in), which is solved in the 2020.1 version. Be sure to have that version (or rather 2020.2), if you don't have it already, as Thermosmart support is improved in these ...

Thanks!!! As I am Dutch as well, there is not a lot that needs to be changed in the script :D

Edit: after adding the LUA script (device-triggered), switching the special mode works fine!

However, the log file shows this error for this line of code when I tried to change the mode:
2020-05-20 13 ...

I use powermode in my Domoticz; created a selector switch for it, in my setup with the name "Daikin Special Mode". In this switch I have three buttons: off, Power Mode and Economic Mode.

In my setup I have a LUA script controlling the Daikin, I have added some stuff for the Powerfunctions. The ...

I use a blocky "program" for my new Daikin airco (see my recentlyccreated thread with blocky control in the Heating and cooling section of the forum). In my experience switching mode to Cool or Heat doesn't work reliable. It sometimes works, but often it does not. In the log I see communication ...

I am using a blocky "program" to control my new Daikin airco (see my other post in a thread the Heating and cooling list), but in my experience switching mode (from Cool to Heat etc) does not work reliable. It sometimes works, but often it does not.
I see in the log: 2020-05-13 11:56:48.670 Error ...

I have added 2 things.

The first thing is a dummy switch which makes it possible to terminate the whole blocky program. That enables my wife to just use the standard infrared remote for the Daikin. It can be switched on/of on the tablet in the kitchen where a Domoticz frontpage is displayed ...

Just for fun, here is a screenshot of my blocky control "program" for my Daikin airconditioning:
Blockly.png

I have used the temperature that my Honeywell T6 smart thermostat gives as input, as the Daikin is at appr. 4 meter height. The central gas heating that my Honeywell T6 smart thermostat ...

I have been trying to connect to honeywell T6. Checked out youtube without any succes
These are the steps I did (please check every vaiable that copy because otherwize you get no connection):
- read www.domoticz.com/wiki/HoneywellDeveloperApiKey
- points to do developer.honeywellhome.com/
- 1,2 ...

In step 4 of the wiki I am stuck.

I have given in: https://api.honeywell.com/oauth2/authorize?response_type=code&client_id=b9c..myAPI-key...Nf8&redirect_uri=none
The reply is: "The redirect URL provided does not match the redirect URL registered for the app."
The app of which the API key is, has ...

Just for users that run into the same problem as I did. Fresh out of the box the Aeotec z-wave was recognized by Domoticz (2020.1 on pi), but the Popp valve (also fresh out of the box) just couldn't be paired. Resetting the valve didn't help, however resetting the stick and removing and then add it ...

My problem of not being able to connect to the central Thermosmart server is solved by upgrading to the new Domoticz 2020.1 version

@MMSoft, did you just use the username and password that you use to log in at https://my.thermosmart.com? I have used that for connecting Domoticz with the Thermosmart server (and have a simple password) but it doesn't work....

Thermosmart helpdesk replied in Dutch, on my question about connecting Domoticx with the Thermosmart:

"Dat kan niet direct via onze site. Je zal dat via Domoticz moeten doen, net als de eerste keer dat je die koppeling maakte.
Met vriendelijke groet,
Kodjo Kouwenhoven
ThermoSmart"

Translated ...