Hi All, For years i've installed domoticz with packages released from jadahl but as many people know is that there will be no new version released. Sooner or later DSM 7.0 will be released and maybe we have a problem. Does anybody know how to run domoticz on synology? I have read the following link ...

Hi Kees, First question why are you using 2 routers on your LAN? It's easier to use only the Ziggo router and if you need more wired ports connect a switch on it, and if you need more wifi through your house just buy an access-points. A router routes subnets (just like 192.168.178.0/24 which is ...

Good news JoeneH, it seems like you have running nefit-easy. I've got this issue also sometimes when i copy paste some scripts to unix, for me it helps to do it using notepad or notepad++. Regarding your questions: When you log on to your system you do it als admin but with root you have full access ...

JoeneH wrote: ↑Thursday 15 November 2018 11:47 @jurgen,

thanks,
however, testing it gives the following:
-sh: ./easy-server.sh: /bin/sh^M: bad interpreter: No such file or directory

what's wrong?
I am running DSM 6.2.1

I think it is a copy paste issue. Copy the script from the forum to notepad and then copy the script in VI of NANO.

Hi all, Last week i tried to install libsoundtouch on synology and tried to controle my bose soundtouch with domoticz. But i had some problems with python version 2 and 3 and i was not able to get everything working. After some troubleshooting with python3 and install libsoundtouch with pip for ...

Thanks @jurgen, early June I had similar problems. I also found the 'old' link, removed it and was able to get the easy-server running again. However, I used to use pm2, as suggested in https://www.domoticz.com/wiki/NefitEasy Now I don't have pm2 any more and noticed it isn't needed any more ...

Hi All, Previously i had some issues with Nefit on my synology with version DSM 6.1.7-15284 Update 2 while my old DSM version 6.0.2 has no issues. XMPP Authentication failure, so i decided to update nefit with npm update neftit-easy-http-server -g but it get's worse. After that Nefit won't even ...

Hi all, Yes i tried to heal the network but it does not make any sense. I have a zipato and qubino devices in the network and they work well but the neo coolcam does not communicate through the other devices. When i connected the fibaro everything is working directly. Maybe it a compatibility issue ...

I have brought the neo coolcam doorsensors back to the supplier and bought a fibaro door sensor.

The fibaro door sensor acts as a client and is using other devices as router just like i expected.

No neo coolcam for me again.

Hi All, I have bought the Fibaro doorsensor version 2 with temperature sensor buildin and i'm using domoticz on synology. I have succesfully added the device to domoticz and the sensor switches when the door goes from open to closed and visaversa. The only device that is usefull is device 00000D34 ...

Hi All, I have a question about z-wave routing and neo coolcam door sensor. Does anyone know if the neo coolcam doorsensor supports a mesh network as client? Does anyone know if it is possible to add a manual route for z-wave devices in domoticz? Currently i have a Neo coolcam door sensor but the ...

Hi Oliviers,

Thank you, i will try that.

I'm not sure which device i will use for swithing the power on/off, i can use zwave with zwave relay modules or using a wired relay bord like.
https://www.robbshop.nl/ethernet-module-8-relais

But thanks anyway!

Hi all,

Is the ETH008 relay bord full compatible with domoticz? Can i add the hardware for 8020 and switch the eth008 modules or do i need to manually configure the http actions?

thank you!

Hi Oliviers, I have a question about the schematic wire connection of the 24volts AC. Do you have one transformator/adapter for more water valve's? in other words, can i use one transformator for 4 water valve's? I would like to switch on and off the water valve's seperatly with one transformator ...

Hi Noppes, I have configured ser2net which is a program that can transport serial over tcp, for example a small device like a raspberry configured with ser2net which has an IP adres 192.168.0.1 and has a listener on port 3000. With this you are able to select in domoticz hardware P1 Smart meter with ...

Hi Johan and CheckDiz Are you able to start easy-server using this command and then check if it is listening on port 3000 ? sudo easy-server --serial=SERIAL --access-key=KEY --password=PASSWORD netstat -a |grep 3000 tcp 0 0 localhost:3000 0.0.0.0:* LISTEN if you would use the the following script ...

Does anyone know if the nano dimmers from eaotec also compatible with domoticz?

Anyone?? I just need some guidance on making the startup script like how to make it, what to put in, where to place it. Again, I got it working but once I close putty session the server stops Sent from my iPad using Tapatalk Create the following script and save it in the directory /usr/local/etc/rc ...

Hi Ivo, Please see https://www.domoticz.com/wiki/Synology I have wrote the tutorial and post it on the wiki. Good luck. Hi all, is there a manual "installing nefit easy http server" on a synology NAS for dummies? I have a DS214+ (DSM 6.0.2) with Domoticz V3.5877 and Node.JS V4 installed. I use it to ...

Hi All, I have running a S0 meter over tcp to collected the kwh from my solar panel inverters. Sometimes there are wrong values insert in the database, so i it would be nice if a format check is possible to prevent that wrong values can be insert in the database. I know that it is possible to edit ...