Uhhh, I'm on Domoticz since 2014 and now I found "Visual Crossing" in the HW-Settings.
Works like a charm and data is much more precise than data from old "Open weather map" for me.

The One Call 2.5 still works for me but today I've got another mail, that the API 2.5 will be shut down 14th of October 2024. Had too bad experience with giving someone my Credit Card data and unfortunately they do not offer PayPal. So bye bye for this service for me. But "Meteorologisk institutt ...

This service has ended 1st of April. Goto SETUP/HARDWARE and setup a new type: Meteorologisk institutt Norway (Weather Lookup) insert your geographic coordinates like 51.12345,6.5463 Enable it Add it I did also a SETUP/SETTINGS -> allow new hardware devices for 5min (don't know if it is neccessary ...

I have setup a Pi400 with Bullseye and installed Domoticz latest version. After power connect the Pi is booting and I have access via WINSCP / Putty. System is up. But Domoticz will not start 100%. I do not have access via browser. When I do a reboot (sudo reboot) the Pi reboots and Domotich comes ...

Is your "hardware switch" a RF switch or connected via wires to the blinds?
If it is a RF switch, is the "Zstick" also a receiver or just a transmitter?

Found a discussion in a german forum here: https://www.symcon.de/forum/threads/241 ... egensensor
...and a link...
...here for 59 US$: http://rainsensors.com/
http://rainsensors.com/how-it-works/

Thanks for your experience! This optical sensor seems to be just what I need but the price is unaceptable (116€).
However about the simple detector from China it could be a solution to gild them.

@emme I'm also thinking about a rain sensor which should immediately send a signal to close one specific blinds but also to open it soon if raining stops. What I found is this ready made item: https://www.reichelt.de/rain-sensor-12-v-dc-m-152-p118916.html? . It needs a of course a transmitter or ...

AH, ok just got the answer that it is supported with the DOmoticz version from today !

After many years with RFXCOM 1. generation I changed to RFXCOM433 XL . In RFXmngr T6 messages are received when send from a remote control. I have enabled "Tx" protocol. However in Domoticz T6 protocol is not recognized; get nothing in the log. (Transmitting is possible) Does anyone remember if ...

...my old box ( V3 or V4) did that also because you can control it from outside your LAN via the mi-light APP. However I have blocked the ports.

...or use "Notifications" from Domoticz (SETUP, NOTIFICATIONS). I'm using PROWL, only working for iPAD, but there are more Notification services available. But check, if you get notified if your tablet is idle for longer time. Maybe you have to configure your notification service for that mode.

This is a very old one, but works and seems to be still available: https://www.geeektech.com/en/mi-light-milight-wifi-receiver-receiver-controller.html If you think about ordering there I would ask if you realy will get exactly this item. Also there is a risk that the SW inside is not compatible but ...

Would be great also from my side. Today I changed my 9 audio buttons (controlling MPC/MPD music player on a Pi) to 3 devices by using the selector switch. But an extra tab would be great! Unfortunately I read in another post that Domoticz was not designed for it and it would be "Over the top". So ...

Maybe this is interesting for others and the developers: Some years ago I started sending weather forecast and other messages automtically triggered from my Raspberr Pi / Domoticz to TWITTER. Since TWITTER blocked the automatically authentification in 2014 via a script I stopped this. Now with ...

I have a very old Wifi milight controller-box with 3 RGB/W bulbs (V1 or 2). Now I want to add a new RGB bulb but I don´t know about the compatibilty of new production bulbs to the old controller. I found this comment in github: bulbs using Milight protocol versions 4.0 and 6.0. RGB bulbs which are ...

Hi Matze, have those thermostats from Comet but with DECT interface connected to Fritzbox and Domoticz. However It seems that connecting them with Domoticz seems to be very easy. You configure some dummy devices and call the preparaed script from "On action" or "Off action" with the relevant ...

Does anyone know if those are compatible to RFXCom?

https://www.smartwares.shop/smartwares- ... 5rf-2.html

Currently they very cheap: https://www.pollin.de/p/funk-rauchmelde ... eck-580627 They are compatible to RM175

Had that idea some years ago but as emme says there is a problem with iOS devices. Now since some weeks I have a FritzBox router (also available in Australia :D ( http://firstint.com.au/fritzbox-fon-wlan-7490/)). This box knows the presence of an iOS device even if it is in sleep mode. I tested with ...

Hi Jos, yes, found a post and edited my original post: I think I found some solutions here: http://www.domoticz.com/forum/viewtopic ... ll#p152234 Hope I fixed it... on observation... After now about 2h observation time I think the solution was successful. I removed tons of old log-files but I think ...