I've been using domoticz for over 8 years. I'm baffled by the great amount of people calling it stable. 4 out of 5 updates resulted in a crash and complete reinstall. (not much work with a recent .db file, but still, always afraid to update). Once a failed zwave switch destroyed my whole config ...

johnny86 wrote: ↑Sunday 14 November 2021 12:40 I think there is a problem with the new raspbian bullsey, and with Python 3.9.2 which is in it

Ah, thanks, that has to be it. What a pity.

Strange thing. If I use it outside Domoticz , it works fine python3 example.py -c NL -l en-US ac-config <MY_DEVICE_ID> supported_operations: [<ACOp.OFF: '@AC_MAIN_OPERATION_OFF_W'>, <ACOp.ON: '@AC_MAIN_OPERATION_ON_W'>, <ACOp.RIGHT_ON: '@AC_MAIN_OPERATION_RIGHT_ON_W'>, <ACOp.LEFT_ON: '@AC_MAIN ...

Got my LG PC18SQ today, so really keen on adding it to domoticz. Everything went wrong, trying to get python to work so I did a fresh domoticz install. (thank goodness I've got DB backups). I did end up with raspian lite bullsey & python 3.9.2 though after a fresh raspbian/domoticz install on my ...

Can Domoticz talk to this unit? Not yet I guess. I hope someone will take the time to support this gateway. I was hoping that it was just a rebadged unit that was already supported. I don't think that's the case. Only thing I found out so far is that the gateway responds to ports 2333, 6668 and ...

I ordered mine yesterday as the black-friday price is already in effect.
Approx 50 euro for the kit with 3 lamps, gateway & remote. 13 euro for a door-sensor

Anxious to find out how to make it play nice with domoticz...

Got my SM card reader today. The SM card has a view .bin files: CONN_000.BIN INST_000.BIN CHAN_000.BIN PROD_000.BIN CONFIG.000 Is this something that ETS would read? I'd say no if I check this link: https://www.knx.org/ie/software/ets/manufacturer-product-databases/index.php USB stick looks ...

Skippiemanz wrote: ↑Thursday 17 May 2018 22:09 .....And a weinzerl usb gateway.....

Thx,

About the Weinzierl, which one is it?

Perhaps there is a usb stick somewhere with the project file in the utility closet?? ... Found it, unfortunately it's a 16MB SmartMedia memory card that fits a hager TX100 programmer. Luckily, my friends from aliexpress have a card-reader that also reads SM for just €8.51. I'll be back in a few w ...

..... No trying to be negative about domoticz but why not use the KNX(RF)? add a new IP Gateway like xxter or Pairott and your off to go! I hope ou got the KNX Project file with the purchase of the house.. Thanks for the heads up. In my current house I use z-wave stuff & domoticz. In the new house ...

multinet wrote: ↑Tuesday 03 April 2018 16:43 ...Are you still interested ?

If not, then I am!
I just bought a house that turns out to be loaded with hager knx-rf switches which I'd love to control via domoticz.

But trying to search KNX is already near impossible

So sharing any KNX-RF related knowledge would be welcome.

What can I say, when I started with domoticz I used a pi1B, which did work, but it quickly ran out of memory. Especially when I tried Siri integration. Bought a pI2 and never looked back. For a mere 32euro you can buy a Pi3 today (they still have so-called black-friday prices at sossolutions ) Edit ...

I too cannot change 250 to scene, tried it for months. However! Did a reset of the minimote again today and a new inclusion. Again setting 250 to scene does not work. So I just tried to add a button to a scene and it works! With 250 still on group. I have a scene where the TV and the setup box are ...

hi, can somebody help me. i'm new to domoticz and homekit. when i start homekit i get a error that the scrips start is missing. can some one tell me how i can fix this? thxs, maikel I just spend a few hours having the same issue. The wiki assumes homebridge is not installed but the most recent rPi2 ...

gizmocuz wrote:just get yourself a raspberry pi 2 and you be fine

Yes indeed, Pi2. Best bang for the buck ever.

Domoticz already runs ok on the old Pi, Pi2 is almost overkill. Can't beat it.

Tried npm install --verbose and get: ............................ npm verb request uri https://registry.npmjs.org/ip npm verb request no auth needed npm info attempt registry request try #1 at 15:50:40 npm verb etag "2CPEK6B74CEVLLFG2E792DIY5" npm http request GET https://registry.npmjs.org/ip npm ...

Any successful installs on a Pi model B (the 1, not the 2)?

npm install just hangs for more than an hour and than says "killed"
No way of logging on to the pi in the mean time.

I followed the wiki to the letter.

TIA

Really, really cool! Sounds promising! I tried to install it, but failed so far. NPM isn't working for some strange reason (I already responded at your post @Tweakers). Would love to get this to work, on my raspberry pi with razberry 2. but I think I have the same problem: wget http://node-arm ...

I have the same FGS-221 and even brand new from the box it has proven to be a real pain in the ...
What worked for me is move the Pi really close to the switch.
Same issue with other Fibaro stuff.

I had to try as many as 15times to get the 221 included.

[Name:] Janis [Country:] Netherlands [City:] Eindhoven [Occupation:] ICT Architect [Hobbies:] DiY, Music, hifi, cars [Chose Domoticz because:] Best fit for Raspberry Pi [My role here:] Learn at first, contribute after [Equipment:] Raspberry/Razberry2.0 (Zwave+). 4 Popp switches. 1 Fibaro multisensor ...