Domoticz

irimi

select 433.92 and click Set Mode and Save Settings

Thank you very much - problem has been solved !
Quite easy , I didn't see that the frequency was wrong

irimi

After trying to update via domoticz the RFXTrx33E device configuration the RFXTrx33e keeps in invalid state :( I'm able to flash other firmware version and I connect with rfxmngr, but the rfxmng does not recognize the configuation & I can't update the configuration. (disconnection of USB or "Reset ...

irimi

One of my blind motors was defect and exchanged to a new one (RTS20/17) but I'm not able to pair it again with my RFXtrx433E , it is only paired with a Telis 4 RTS. I'm using the RFXmng directly I already updated to most recent firmware Pro1/1041 then I enter program mode with the original remote ...

irimi

Hi timeless, I'm trying to compile domoticz on recent lede trunk, but I get following error: CMake Error at [...]/lede/source/staging_dir/host/share/cmake-3.8/Modules/FindBoost.cmake:1842 (message): Unable to find the requested Boost libraries. Boost version: 1.65.1 Boost include path: [...]/lede ...

irimi

Have you once tried to update a new recompiled version of OpenZwave without recompiling and installing thesame version of Domoticz? As far as I know openzwave is linked statically to domoticz according to CMake config. Since domoticz does not use the dynamic lib, this is not possible. I don't know ...

irimi

I'm using just normal ZWave. Video: maybe for raspicam integration, but I don't have any experience with it .

irimi

The userland package is RPI specific and domoticz uses the command vcgencmd of that package to evaluate RPI temperature and RAM usage, i.e. that is the interface to the "motherboard sensors". But it also contains tools for RPI's hardware e.g. raspicam, HW video decoding. My RPI 1 is running very ...

irimi

Mmh, v1.5 is from 15-Aug-2016 according to the Git Releases . We are only 6 days in 2017 hehe :). I think using a trunk version for any software as a stable build is not always advised. And since I'm trying to get this in OpenWRT/LEDE a trunk version of anything will be rejected immediately. That's ...

irimi

I had no troubles getting open-zwave to work on a RPi3, see my makefiles in this post: Re: Domoticz on OpenWRT Yes, indeed, your Makefiles are working fine. I'll update my feed, thank you very much ! But attention, the defined archive version 1.5 in your makefile for openzwave build is nearly one ...

irimi

Mmh, according to https://wiki.openwrt.org/toh/raspberry_pi_foundation/raspberry_pi it seems RPi3 is still unsupported with "OpenWrt's Chaos Calmer" release :( . For RPI3 recent openwrt's trunk version is required and actually I'm not able to compile OpenZWave due to strange compiler errors on that ...

irimi

Update for RPI 2B/3 is available now. I only have tested Model 2B , this one works fine for me.

irimi

jensc wrote:No luck with the RPi 3 B+. Booting freezes at the initial "color check" screen.

Of course ! Available image is only for older RPI, for recent RPI3 the image has to be rebuild with other settings.
I'll try this.

irimi

I have an Aeotec Smart Switch 6, recently a refrigerator is plugged for power and energy measurement.
Power measurement looks plausible but energy looks very strange:

: Energy_Power.png (57.98 KiB) Viewed 1098 times

Most time energy is 0 Wh but suddenly there is a peak of 1000kWh resp 1MWh

, then zero again.
Any idea ?

irimi

Update to r3191 with openzwave v1.3.488 is available via okpg update

irimi

Update to r2659 with openzwave v1.3.401 is available via okpg update.

irimi

When I try to compile, it breaks on compiling openzwave. This is the error: Building OpenZWave Version 1.3.-1 Linking Shared Library arm-openwrt-linux-muslgnueabi-ld: unrecognized option '-Wl,-z,now' arm-openwrt-linux-muslgnueabi-ld: use the --help option for usage information Any idea? Did you ...

irimi

wizzard72 wrote:I have build a basic openwrt image for the Raspberry Pi 2. Can you share how you created a package for domoticz and openzwave?

This is very easy: just look at openwrt wiki how to add feeds, then add my feed:

Code: Select all

git clone git://git.code.sf.net/p/audiculapi/code audiculapi

irimi

wizzard72 wrote:This is a cool project. Does it support the Raspbery Pi 2?

No, RPI 2 is not supported. There are no update plans since openwrt supports RPI 2 only on trunk version.

irimi

Update to Domoticz v2.505 & OpenzWave V1.3.293 is avaible via packetmanager.

irimi

Update to Domoticz v2.2383 (incl. python bindings) & OpenzWave V1.3.144 is avaible via packetmanager.

Search found 33 matches

Re: RFXTrx configuration invalid & can't be changed

RFXTrx configuration invalid & can't be changed [solved]

Re: There is Somfy in the air!!

Re: Domoticz on OpenWRT

Re: New Raspberry1-2B+ Images based on OpenWRT (Update 3.5877)

Re: New Raspberry1-2B+ Images based on OpenWRT (Update 3.5877)

Re: New Raspberry1-2B+ Images based on OpenWRT (Update 3.5877)

Re: New Raspberry1-2B+ Images based on OpenWRT (Update 3.5412)

Re: New Raspberry1-3 Images based on OpenWRT (Update 3.5412)

Re: New Raspberry1-3 Images based on OpenWRT (Update 3.5412)

Re: New Raspberry Image based on OpenWRT (Update r3.5412))

Re: New Raspberry Image based on OpenWRT (Update r3191)

Strange Energy Measurement of Aeotec Smart Switch 6

Re: New Raspberry Image based on OpenWRT (Update r3191)

Re: New Raspberry Image based on OpenWRT (Update r2659)

Re: New Raspberry Image based on OpenWRT (Update r2505)

Re: New Raspberry Image based on OpenWRT (Update r2505)

Re: New Raspberry Image based on OpenWRT (Update r2505)

Re: New Raspberry Image based on OpenWRT (Update r2505)

Re: New Raspberry Image based on OpenWRT (Update r2383)