Yes, that's all. If you act as the pages describe you can send your own unique codes, like I did with my RFXCOM hardware. That worked for me, don know how. Those RTS commands are not saved in the Domoticz database, so I think that RFLink saved those values. Hi Eddy, i wil do that this week, its to ...

If you have an RFLINK with the right frequency for Somfy it's easy, at least it works for me. Change Switch type of the device that is found by 'Accept new Hardware Devices' with the Edit button to Venetian Blinds EU. 2018-07-24_13-26-44.png eddy and that is al what you did ? no key settings like ...

domogijs wrote: ↑Friday 20 July 2018 22:28 I have the same problem. Did you solve yours?

Please share the solution if so.

Greets Gijd

Hi Gijd,

no...
i also seen the french site but i really dont know what to do.. i thought that this would be easy.
but it seems that Somfy is not really easy to get working on Domoticz.

tnx i got it working

hi all, maybe its alread explaind but i can't find it on this forum. i have purchased RF-LINK for Somfy (433,92) and in the devices i also see my sreen when i open of close them with the somfy remote. somfy01.jpg but when i do the manual switch option that i found on the wiki: https://www.domoticz ...

pwhooftman wrote: ↑Tuesday 26 June 2018 20:51 a simple 'cat /dev/ttyUSB1' will tell if any data is received. Issuing this command from the command prompt should produce readable output every 5 seconds or so.

Tnx i will try this when i have the new (test) cable

Hi all,

this week i wil get a new cable (to test), as soon a have the cable i wilt test this and also wil test what @FrankVZ wrote about this.

-A

Did you enable 'accept new hardware' in the settings ? >>kabel is a P1 USB cable<< Kabel is a cable ... but where did you buy it from ? Mine is from here (http://www.smartmeterdashboard.nl/webshop) and it always works If accept new hardware was disabled, you might have to try with both baudrates ...

Niemand ? Nobody ? Maybe, but not always promptly after posting a question. This is a forum not everyone is continuously monitoring questions. Anyway, I think the meter is not recognised by Domoticz. Could be OR the wrong usb port (already tried the other one?) OR you didn't limit the rate. You ...

Niemand ?
Nobody ?

Hi, i bought a P1 usb kabel i have pluged it in my Raspberry and i see in Domoticz 2018-06-22 11:42:04.710 P1 Smart Meter: Using serial port: /dev/ttyUSB1 So far so good. in the hardware section i have enabled the "P1 Smart Meter USB" on USB1 but then ?... i dont see anything ?. I would expect to ...

Hi all, i have a Foscam C1 but i cant get it working in Domoticz, i found only one topic about it in this forum but thats for some other info, i also lok at the WIKI and the camera URL should be /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=admin&pwd=mypasword it tryed that but stil i cant get the ...

hi

do you matbe have for me the domoticz setup ?. i cant get it working in domotics
a printscreen or setings wit Image URL wil be nice

tnx

Same Here Paul
I also dont see the Somfy

Also with a rf LINK

SweetPants wrote: ↑Thursday 21 June 2018 11:38 Can you mark the topic solved?

Yes thank you

Thnx all

I dont have dont have lots of switches yet, iam stil setting my hardware from homewizard to the domoticz
One thing is a issue that is my Somfy becourse i use RF LINK and that is not working with rf LINK ?

But oké i wander of, tnx all i really appreciatie it

SweetPants wrote: ↑Wednesday 20 June 2018 21:50 Behind EvoTouch there is a little down arrow, press on it

yes that is it tnx what i dont understand is why does it not have a own "icon" ?

SweetPants wrote: ↑Wednesday 20 June 2018 21:27 What do you see when you select the dropdown menu in A-F?

noob question but what is the "dropdown" menu A-F ?

he hello, maybe a know issue ?, but mis a switch in my Domoticz i have a sensor "balkon deur" but i dont see this in the my blokly ?. schakelaar00.jpg this switch is working and active, schakelaar01.jpg i use Domoticz version 3.8153 with a raspberry PI. what is already tried - putty: domoticz reload ...

Try simplifying your blockly. The “if else/if” block without an else/if usualy doesn’t work. And the second “and” won’t work, because time cannot be “> 22:30 AND < 08:00”. Create a blockly for the first period (>22:30 and <23:59), then create a second blockly for the second period (>00:00 and <08:00 ...