Or he used it in a container with Watch Tower to keep it up to date

Get this for your RPi4. Works wonders

https://a.aliexpress.com/_EyfFjAO

Yes, that does change the original advice. In case you want to utilise Domoticz and "that other home automation software" ;) you might be best of using docker. It will however be challenging using for instance you Zigbee devices in both applications. Not impossible, just a hassle. Good luck with ...

If you are not planning other roles/software on the RPi I would suggest going the Easy route. Why would you introduce another layen (eg. Docker) if you do not need to seperate roles.

The KISS principle is your best aproach

The intergrated dashboard is working as expected. Build 16081 shows the correct cost estimates based on the values I entered in the settings. Previous versions showed the cost multiplied by thousand which was a bit confusing ;) Kudos to @Meneer Klaas and @Gizmocus for this excellent addition to ...

That's the device I use (339) which gives me this result. Will investigate further later on this day. Tx foor your reply! Hi Sjonnie, my SolarEdge is connected to Domoticz with the SolarEdge Modbus TCP hardware. The values in Domoticz are directly from the inverter and change every 10 sec. The ...

McMelloW wrote: ↑Tuesday 28 May 2024 22:06
idP1 = Power - (Energy subtype)
idSolar = Total Energy (General subtype) - kWh

In your picture, use 339

That's the device I use (339) which gives me this result. Will investigate further later on this day.

Tx foor your reply!

McMelloW wrote: ↑Tuesday 28 May 2024 18:10 My production is the same as it is in the SolarEdge app.

Great! So it should work with a SolarEdge converter Could you show me which Domoticz device you used? Might be that I am using the wrong one

Just to add: The dashboard allways shows 497,2 Watt production. Rain or shine, day or night, it never changes. Anyone any clue how to get the proper value?

Tx!

did you try 339 for your solaredge ? Thanks for your support! Yes, I did use that IDx but no result. I even restarted Domoticz to be sure. Just to add: I use my SolarEdge through the Modbus TCP plugin from IronWolf (iirc). My Domoticz installation is running in a Docker environment (with the ...

I have been experimenting with this dashboard and could use some help getting things to work. I get the readings for gas but not for electricity. The IDX for my (YouLess) P1 meter Electricity is 199. 2024-05-20_15-54.png The result for this code: $.getJSON('/json.htm?type=command&param=getdevices ...

Wouldn't that be something that you configure in the settings of your tablet (I assume you use a tablet)? Might even be an app available that would turn on and off at specific times?

Portainer only manages the docker containers and gives you the ability to do just that over a web interface. If the container starts defective it is caused by the docker settings or a malformed docker-compose yaml.

Portainer has nothing to do with this problem.

On

I am sorry but what do you mean by

The userdata folder still is not created.

Did you create it in the home directory of the user or do you expect Docker to do that?

You could set the userdata folder to a folder in Home of the logged in user. Example /home/pi/Domoticz/userdata. There you can adjust permissions as you need / see fit.

I try to prevent changing permissions in other folder than ~ (unless it is absolutely necessary)

Maybe I don't fully understand your plan but would it not be more easy to create a backup on the C4, install de RPi with Domoticz and restore the database? It will keep all your configurations and data so if you keep the time between the backup and the restore at a minimum you wouldn't loose much ...

I have the SolarEdge inverter with the modbus TCP plugin. I migrated from Domoticz installed directly on my host to a server with Docker containers. I had some issues to iron out but got it working with the help from this community. You might want to consider a Docker environment. I have found it ...

First thing that comes to mind is the " before /dev/serial blah blah. There is no closing " so probably won't work. Try without the "

Hi all, The script works thanks to all your tips and support! :mrgreen: The blinds don't open when sunrise is between 04:00 and 06:05 (or 08:00 for that matter). In fact they obviously don't open after 06:05 as well which was expected. I now have the timer in the scene set to open on 06:06. All ...