This isn't true either. Of course, if you install the brand new IQ8+ inverter, you need D7 but in that case you also have to use a new Enphase Gateway (the new name for Envoy). Unfortunately Enphase Envoy-S (Standard or metered) cannot be used with the new IQ8 series of microinverters. This is not ...

Oh wow, wish my watermeter was also connected to my smart meter. Didn't know this.

To my knowledge the watermeter isn't connected to the smart meter. There are possibilities as shown in this topic:
viewtopic.php?p=275426&hilit=watermeter#p275426

Ow, how stupid from me. Ofcourse the C25A (or D25A) device before the meter. The 30mA did I forgot to mention, sorry. And the RCBO is not yet mandatory but is the safest way to be installed. So, in my opinion, "mandatory". If I am correct it will become mandatory with the NEN1010 2020 edition.

The only thing you have to think about is the wiring in the fuse box. In the Netherlands normally you have 25 ampere breaker giving 5750 watt so if your inverter is puting out 3000 watt the wires have to withstand 8750 watt max. What? Normally you don't have a 25A breaker device. An RCD of 40A and ...

@friso82, I can't explain why the spikes occur on 10:20 am. But I do know that those ferrite rings prevent unusual behaviour of the envoy - s. They are to be placed between the circuit breaker and the envoy-s. But you can always call Enphase, they are very helpfull (to me so far). Try to call them ...

You do have a single phase Envoy system? Are there any ferrite rings installed in the switchboard?

Ah, thanks. So no good for showing the total amount of Kwh of my refrigirator.

I ran into the same issue as mentioned here. Therefore it resulted in me visiting this thread.

But when I look at my devices I have a General Kwh option but also a Usage Electric option. This last one seems to be working fine. Anybody knows the diference between these two?

That did it! It works: 2020-05-20 22:01:01.843 Status: dzVents: dzRequestSolarInfo : Inverter Inverter 1 = 13508.00 Wh 2020-05-20 22:01:01.843 Status: dzVents: dzRequestSolarInfo : Optimizer Panel 1.1.1 = 916.00 Wh 2020-05-20 22:01:01.843 Status: dzVents: dzRequestSolarInfo : Optimizer Panel 1.1.2 ...

Thanks, I do have a older version on my Synology. Going to upgrade right away. Due to the lack of sun I don't suppose it wil work right away

Maybe I am just a bit stupid. But if I use your script I get: Solaredge_optimizers.lua:86: attempt to call field 'toBase64' (a nil value) I triple checked my account data in line 81 - 83. They are correct. What am I overlooking? Manually trying the http get works and I see a lot of data. 80 local ...

Does the link below help?

https://www.domoticz.com/forum/viewtopic.php?t=26800
or
https://www.domoticz.com/forum/viewtopic.php?t=21265

After working like a charm I have got some issues with my Incomfort gateway. Don't know why but all of a sudden I only receive the value zero (see below). I have changed the position of the gateway, closer to the boiler. Then it worked for a few days and then the zero value is back. Ofcourse I ...

@stingone,

Do u still need the script to read the waterpressure?

Every Intergas HRE boiler has an OpenTherm connection. But you still need a gateway to get the data. You could build it yourself but you can also buy one (it's named Incomfort Gateway). Buying is, ofcourse, more expensive. The gateway doesn't need to be very close to the boiler. Connecting/using the ...

For those of you who want the F1 calendar 2020 perhaps you can use this code:
(it is in Dutch but that works fine for me)

This one is solved. I don't know what or how. But I checked it again this evening and it is working...

I have a RPi connected to the smartmeter and this one does not show the correct daily use graph of the powerconsumpion. It stays on the zero line. This RPi is connected (slave) to my NAS with Domoticz (master). In the master the graph is working.

Anyone knows a solution to fix this?

Thanks all for explaining especially WideckNL! For anyone who needs this also here is what I made of it. All credits to JeroenZeist! Script_time-Intergasincomfort.lua ---------------------------------------------------------------------------------------------------------------- -- Written in LUA by ...