waaren wrote: Tuesday 29 December 2020 20:04

kubrik wrote: Tuesday 29 December 2020 18:12 It could be a regression?

If you mean to ask if a hotfix is going to be applied for this, the answer is no. If you are lucky a new stable will be released soon.

Sigh

Hi,
i am having the same issue (status 204 treated as error by domoticz) but i am using stable version:

Version: 2020.2
Build Hash: b63341bc0
Compile Date: 2020-04-26 13:47:55
dzVents Version: 3.0.2
Python Version: 3.8.5 (default, Jul 28 2020, 12:59:40) [GCC 9.3.0]

It could be a regression?

Nice and clean example!
Thank you waaren

You stored the historical data of multiple sensors in one table. The standard statistical dzVents functions cannot deal with that. You need to define the historical data per sensor.


Ok, thanks waaren.


example script


data =
{
t3 = { history = true, maxMinutes = 60 },
t19 = { history ...

Hi,
i need help with statistical functions on persistent variables.

I've persistent data like this where i store historical temp and humidity for room/zone.


local obj1 = {
["Temp"] = {
[1] = {
["time"] = "2020-11-18 22:50:0.462";
["data"] = {
["hum"] = 73.1;
["zona"] = "Room1";
["temp ...

kimhav wrote: Saturday 10 October 2020 16:56 Did you ever give it a try with the Bresser sensors? Asking since I'm looking at getting a couple of Bresser 433MHz Thermo/Hygro sensor.

Yes, they works. Seen as "Cresta, TFA TS34C".

Hi,
with this, you can also use offset in history for channels:

https://github.com/vysheng/tg/issues/94 ... -186102980

How do i make it just read the data from the sensor and not everything that it receives?

this should do the trick for Domoticz:
[url]http://192.168.1.xx:xxxx/json.htm?type=devices&rid=<YOUR IDX>[/url]
<YOUR IDX> = Domoticz device IDX

and this for jarvis

SetVariable: Data to value: system ...

Perhaps i'm seeing the light....
Progress:
after i've upgraded the plugin to 4.1 (and not only domoticz) i got this error:

2018-11-26 00:51:08.425 [751d1430] Error: Thread 25 (Thread 0x751d1430 (LWP 29937)):
2018-11-26 00:51:08.426 [751d1430] Error: #0 0x76e45ef8 in __libc_waitpid (pid=29967, stat ...

Sorry you have trouble, but not really related to broadlink plugin itself. once you have a system with python installed in right way, as required for Domoticz, you should not have problem to run broadlink plugin. I'm not able to provide lots of help on linux, I run all my system on Windows ...

I've 4 Coolcam door sensors.
3 are connected both to the controller and a nearest fibaro plug, 1 is connected only to the plug.
They seems to work well.

When resetting by pressing A and B, all the 4 buttons give a very short blue led flash, no programming possible
It's the right states on which the buttons must be to be programmed.
Program them means that the buttons will learn the code you'll send with Rfxmngr.

To do this, you must:
- keep the ...

Reset the remote by pressing A and B together (quick flashing led)
Reset the remote by pressing C and D together (quick flashing led)


To reset the remote you only have to press A and B together, not also C and D.
You realize that the remote is resetted, pushing buttons...led wil do only a short ...

Button C is wrong.
Reset it and make again the learning for all buttons with Rfxmngr with only Ligting4 enabled.
Then test the buttons always with rfxmngr.
Then test with domoticz with only Lighting4 enabled.
LaCrosse protocol could prevent the correct detection of buttons.

I don't use blockly events..but i think you would add the right comparisions...

if "Door Sw.." = On or Door SW WC Stuen.. = On etc..etc..
and not
If "Door Sw.." or Door SW WC Stuen..

I bought this cheap remote (cloning) fob https://www.aliexpress.com/item/2pcs-Universal-Gate-Garage-Electric-Cloning-Door-Remote-Control-Fob-433mhz-Key-Fob/32487161092.html

fob.jpg

It works with RFXtrx433E (Lighting4 - PT2262).
It could be configured with Rfxmngr, so you have 4 buttons working ...

These cheap cameras probably don't have any snapshot url (like mine).
You can use "motion" ( https://www.domoticz.com/wiki/Camera_Se ... ion_sensor ) to detect motion and then run another script to take snapshots or saving stream video.

Under the stream video you can see the streaming url:

Try if Onvif device manager detects it:
https://sourceforge.net/projects/onvifdm/

If it does..you can retrieve streaming url.

If you update uservariable via json, uservariable lua script will be triggered.