The configurable switch firmware for CC2530, CC2530 + CC2590 , CC2530 + CC2591 and CC2530 + CC2592 chips http://ptvo.info/ is now recognised in the Zigbee2MQTT - Domoticz Python Plugin https://github.com/stas-demydiuk/domoti ... qtt-plugin.

Can't wait to start!

Recently the Tradfri E1810/E1524 is now recognised in Domoticz via zigbee2mqtt (https://www.zigbee2mqtt.io/devices/E1524_E1810.html). I wanted to use the 5 buttons to switch on devices and lights. This is how I did it: 1) First add the Tradfri E1810/E1524 to your devices Screenshot 2019-10-06 at 12 ...

can you provide some screenshots of the replacement ("prefixed with 00, I replaced my manually added one with these "switches", updated them to become "blinds""), thnx

Had the same problem ,

Solution: when you manually add the new switch to Domoticz make sure you select unit 1. See screenshot When you choose unit 2, I got the reverse operation...

Have you tried this: https://www.domoticz.com/forum/viewtopi ... 35&t=23719 ?

Thnx, Camera's back on!

Same here

Great theme, is it possible to get Spotify on the dashboard, showing the current song?

I am using this: https://nl.aliexpress.com/item/1-ST-Wat ... 4c4dENz7Za

Next challenge is to make the capacitive moisture sensor water proof. Have a look at my banana collection

1) cut out some plastic of the connector and clamp and solder a telephone wire:
2) Use a 2 cm diameter hose
3) Fill up the inside with silicone

-Settings, Meters/Counters, RFXMeter/Counter Dividers: Water 10000 (each Rotation/pulse is 1 Liter ,typo sorry -No false positives so far, perhaps because a used a piece of wood to attach the TCRT. this is then placed on top of the water meter without glue. This minimises the optical IR errors ...

Why not , do you mind sharing the code for the rules?

Finally got the capacitive soil moisture sensor working in Domoticz Hardware: -capacitive soil moisture sensor, does not corrode (Aliexpress) -Wemos D1 Mini -connect moisture sensor VCC=>5V (Wemos), GND=>G (Wemos), AUDT=>A0 (Wemos) Software steps: Domoticz: -Create Virtual Sensor, Leaf Wetness ...

With the help of this forum and many other sources I build a water meter. In this post I want to share my build. Hardware: -water meter (see picture) wm.jpg -infrared sensor to pick up the rotation of the small red/silver wheel : TCRT5000 Infrared Sensor (Aliexpress) -Wemos D1 Mini -connect TCRT5000 ...

Thank you very much Jos, applied the following steps on the ESPEasy: -Tools, advanced, check rules, Submit -Devices, edit MH-Z19 sensor, memorize Name :D (in may case CO2), uncheck Send to Controller, Submit -Rules: add on CO2#PPM do SendToHTTP,192.168.2.30,8080,/json.htm?param=udevice&type=command ...

ESPeasy with MH-Z19B CO2 device is showing CO2 values, the virtual Domoticz device is being updated (timestamp is changing according to ESPEasy settings) but CO2 value remains zero. Connecting to Domoticz via HTTP or MQTT, both give the same results :cry: I have tried all the obvious, update ...

In Domoticz you can create a number of different timerplans (setup>plans>timerplan). In my case 3 (Home, Away, Visitors): https://ibb.co/cOE0LT In order to select the correct timperplan, I use a selector switch (switches>manual light/switch>Hardware.Virual>Switch type.Selector), with the following ...

I am running ONVIFER 12.01

Procedure:

-install camera
-right click on camera feed
-select edit and scroll down to see the snapshot address (if available)

alternative
-install camera
-right click on camera feed
-select edit
-select test
-scroll down to see the snapshot address (if available)

I recently bought some cheap chinese ip camera's with ONVIF RTSP support, not expecting the snapshot capability, but....... to my surprise I accidentally did find the precious snapshot link with the help of ONVIFER https://nl.aliexpress.com/item/H-265-H-264-1080P-IP-Camera-Module-Board-with-M12-Lens ...

Yep, thnx, solved