I can try to do what you propose. However, the example you given above, i did add that one near the router, it was added with a (dotted) line in the map of zigbee2mqtt to that router, but for some reason the line is just gone. It also happens with "Slaapkamer" sensor, it was added once with a dotted ...

Hi, I have switched my network from Zwave to Zigbee, after having some issues with the controller and link quality i got a pretty stable zigbee network (it seems). However, when adding devices to the network i see in the zigbee2mqtt map overview they are all connected (either to controller or to ...

I bought a Conbee2, now all the link quality is around 255, i guess it was the controller.

Thanks, ill try another controller and post the results later on.

Hi all, I thought id switch from zwave to zigbee. So bought the C2531 chip with an antenna, that all went fine. But noticed low link quality between the controller and my devices, making them unresponsive. I did the google thing and read to use an USB-kabel extender, which i did, and did not help ...

Great tip, i will use that, thanks a lot!

@solarboy, yes i did .. I just reinstalled my Pi4 with a Pi OS, installed domoticz cleanly, folowed the wiki on installing zigbee2mqtt page, but instead of doing a git clone of the zigbee2mqtt plugin (which installed the beta) i downloaded the 3.0.0 version and installed that. All good, no errors ...

That was it, thanks!

Hi, I just reinstalled my Pi4 from scratch, fresh domoticz install, all good so far. I added my P1 meter and Zwave controller, devices are showing up in the devices tab. Then i add them to "domoticz" so i should see them under Utility or Switches, but nothing is there. Anyone have any idea? No ...

Thanks, uprgrading to the lastest beta worked. However, now i just get "loading..." when going to the zigbee2mqtt custom page in Domoticz.
Running Domoticz 2021.1 b13497 with zigbee2mqtt v3.1.0-beta.

Hi, I keep seeing this in my logfile: 2021-09-10 20:47:43.305 Error: Zigbee: (Zigbee2MQTT) failed to load 'plugin.py', Python Path used was '/home/pi/dev-domoticz/plugins/zigbee2mqtt/:/usr/lib/python37.zip:/usr/lib/python3.7:/usr/lib/python3.7/lib-dynload:/usr/local/lib/python3.7/dist-packages:/usr ...

Hi,

I came across this: https://upndown.nl/collections/frontpag ... ter-pakket
Does anyone know if this hardware can be used with domoticz? It seems very interesting.

Regards,
peter

It seems i had an in my dzvents script. I had device = in the top set to the Hue lamp, instead of the sensor, which probably flood the Hue Bridge a lot. Rookie mistake, but thanks for the responce @walter.

Hi all, I have the following issue; i use a Zwave PIR to control a few Hue lamps in the house. I already noticed a (small) delay on a lamp i have in my bedroom, upon entering the room, the delay is around 3/4 seconds. This was not ideal, but ah well, doable. Last weekend i added the same setup with ...

I thought id try it with the battery solution, eventho they are on the powernet. That worked nevertheless.. yay

I have been trying to reset the flush relay for 2 days now, it just does not work.. One other question, since the device does not show a led or beep if succeded, when a factory reset has worked, does domoticz automaticly link it when i put it in “listen” mode with add new zwave node? Or do you have t ...

Since i was also messing with the zwave.me stick (firmware / bootloader) ever since the problems started, i started to think that maybe a fresh install of domoticz with openzwave 1.6 compiled would have been a better solution, since upgrading the zwave.me stick did not go really smooth, however it ...

Hi, I have been running domoticz for a couple of years, and until a couple month's ago, it was all good 'n dandy. But when upgrading to OpenZwave 1.6 a lot of problems started. I have been really busy with real life / work etc, so never got around to it to fix it, but it annoyed me terribly. So i ...

I just installed a new Pi3 using the online manual, and i get the same error.

Hi all, Recently i bought 2 outdoor Osram light strips (gen2). This generation is able to pair with the Philips Hue bridge using the Hue app. And indeed, this worked (yay!), saved me a lot of money. I use them for a wooden roof i have in the back on the garden (approx 40 meters from the Hue Bridge ...