@vopis can't help you with that. I use zigate. Don't know how zigbee2MQTT works

Okay good to know. I just wanted a cheap zigbee plug and this was the cheapest i could find. The metering is just a bonus and just used to see what different items uses of power, in a day/week.

Hmm when i went to bed, it didn't work. When i got up, it seems to be working. I don't get it. But i'm not complaining.

This is a completly fresh installation, so i only have installed zigate. I have tried pairing a few times, but the value stays the same.

Here is the file.

Thanks i will try that

Are there others here that uses this zigbee plug? It shows up as TS0121. https://www.blitzwolf.com/ZigBee-3.0-Smart-Socket-EU-p-518.html I can get it to turn on/off and it does shows 2 different wattage and one with voltage but they stay on same watt/voltage and doesn't change. Newest firmware and ...

I pair it next to the cc2591 router. Then when it sits in the mailbox, it seems to be enough just to press the button on the side, for it to connect again

Normally i just use the accept new hardare in the plugin web admin settings and then allow for 5 minutes in domoticz settings.

Not good with distance. But i live on the second floor and its just outside the front door, concrete building. Cc2531 router couldn't reach it, so im using a cc2591 router I only have 8 zigbee devices where 3 is routers, 2 xiaomi plugs and the cc2591 router. 2.4ghz is channel 11 zigate also at 11 ...

I have xiaomi door sensor on my mailbox, so i can get a notification when i get mail. The problem is that if i dont get mail after some days, it looses connection and then i have to push the button on the side.
Battery is fine.

Is there something i can do, so it doesn't looses connection?

Thanks. I think i got it working. I wantet to use a xiaomi door sensor in my mailbox, so i could see if i got letters. But i think there is too many walls etc. Outside the mailbox with the extra router i can get a xiaomi button to work, but inside the mailbox not so much, maybe its the metal that ...

I have the zigate on my system but i would like to extend the range.

Is it possible to use C2530+CC2591 as a router like in the zigbee2mqtt?

Couldn't get zigbee2mqtt installed even tho i followed the guide on his webpage, lots of erros. So i bought the zigate usb. Hopefully it will work Sounds like you might need to improve your knowledge working with Linux. Each time an error occurs, search and understand why it is occurring. The fault ...

Couldn't get zigbee2mqtt installed even tho i followed the guide on his webpage, lots of erros. So i bought the zigate usb. Hopefully it will work

To offer a slightly different perspective to the previous posts. I have been using zigbee2mqtt for > 6 months now and I am very happy with it. It could just be you are using an old out-dated firmware on CC2531 that has known issues? I could try it again. I can see that there is a new firmware.

I have a few zigbee items from xiaomi, like buttons, power plugs and cubes.
I have tried the zigbee2mqtt but im not happy with it.

What is the easiest zigbee gateway to set up on domoticz? I use raspberry pi 4 4gb and raspbian.

I have been looking at zigate but im a little lost

This is so weird. I updatet my rflink to newest firmware. Now its possible to change brightness but it's not normal. Around 50% brightness i'ts nearly as low as it can go but no mater if i choose brightnes higher or lower, then it gets brighter until i reach 0 or 100%. Conclusion, 0 and 100% is the ...

j0eyv wrote: ↑Wednesday 16 January 2019 11:44 Which version of domoticz are u running?

V4.10355

I have tried setting the ibox2 to v4/5 and 6 in domoticz and it doesn't matter if i use rgb, rgbww and what they are called.
I can only turn on and off the led strip. In the app i can change brightness. Its not possible for me to do that in domoticz

I got the iBox2 and FUT036. I can get it installed in domoticz and turn on and off but i cant change brightness. Any suggestions on whats wrong? That is already more than I managed to get working with the FUT036 Could you describe your steps on how to get this working? Thanks! I just followed the ...