Ikea Ansluta remote (2.4GHz)
Moderator: leecollings
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Ikea Ansluta remote (2.4GHz)
I'm considering to use Ikea kitchen lighting.
This can be remote controlled by the Ansluta remote, working on 2.4GHz. http://www.ikea.com/us/en/catalog/products/80288328/
Does anyone have any experience with controlling this from Domoticz?
This can be remote controlled by the Ansluta remote, working on 2.4GHz. http://www.ikea.com/us/en/catalog/products/80288328/
Does anyone have any experience with controlling this from Domoticz?
-
- Posts: 890
- Joined: Tuesday 30 September 2014 8:49
- Target OS: Linux
- Domoticz version: beta
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.
But it is not used yet in the code of the RFLink.
I am not active on this forum anymore.
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
That would be nice, and if implemented, for me a reason to buy one.ThinkPad wrote:Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Is this already available?ThinkPad wrote:Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.
I ordered an RFLink, but are still waiting for the rest I need from China.
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Indeed this is now working in the RFLink lab.. both receive and transmit.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Very good news!
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
mmm
Perhaps you can tell me what hardware is working in the lab....
When i am @ Ikea can i order some hardware....
Great job
Perhaps you can tell me what hardware is working in the lab....
When i am @ Ikea can i order some hardware....
Great job
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
See the wiring page on www.nemcon.nl/blog2
Near the bottom it shows 3 working CC2500 modules...
Near the bottom it shows 3 working CC2500 modules...
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
mm looking Fu#%^&$%cking great....
I do have a "RFlink Gateway Gesoldeerd " v.1.1 Do i need to make modifications?
Or can i use all the new stuff?
I do have a "RFlink Gateway Gesoldeerd " v.1.1 Do i need to make modifications?
Or can i use all the new stuff?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
You need to add the CC2500 and since that one does not like the 5 volt signals you also need to add a level shifter inbteween the signals.
Like these: https://nl.aliexpress.com/item/5PCS-IIC ... 21005.html
Like these: https://nl.aliexpress.com/item/5PCS-IIC ... 21005.html
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
I have a 433Mhz RFLink per-soldered and a NRF24L01 on top of it.Stuntteam wrote:You need to add the CC2500 and since that one does not like the 5 volt signals you also need to add a level shifter inbteween the signals.
Like these: https://nl.aliexpress.com/item/5PCS-IIC ... 21005.html
I was under the impression the NRF24L01 was also a 2.4GHz tranceiver?
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver
We will soon also be adding support for the CC1101 - 868 mhz transceiver
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Ok.Stuntteam wrote:Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver
Is there a solderless solution I can plug in the existing board?
-
- Posts: 168
- Joined: Monday 22 June 2015 10:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: The Netherlands
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
Well, I have a working RFLink (without CC2500 though) and some Ansluta stuff, so I'm ready to try it out as soon as it's available.
(And hopefully doable without much soldering).
(And hopefully doable without much soldering).
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
@ Stuntteam,
Please can you ad some more details.
i do not understand what i need to solder and the diff rents between NRF24 for Ikea and the NRF24 for the Milight..?
Example what is my NRF24 now for?
Please can you ad some more details.
i do not understand what i need to solder and the diff rents between NRF24 for Ikea and the NRF24 for the Milight..?
Example what is my NRF24 now for?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
RFlink is modular.. this means you can hook various transceivers to the mega and use their different abilities.
Milight communication is done using a NRF24L01.
Ikea Ansluta communication is done with a CC2500 transceiver. The reason that it does not work with the NRF as well is because a different form of modulation is used, modulations is the way 2 sides talk to eachother..
Milight communication is done using a NRF24L01.
Ikea Ansluta communication is done with a CC2500 transceiver. The reason that it does not work with the NRF as well is because a different form of modulation is used, modulations is the way 2 sides talk to eachother..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 22
- Joined: Wednesday 05 October 2016 7:46
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: RE: Re: Ikea Ansluta remote (2.4GHz)
I see that the cc1101 is also capable of 433 mhz. Will this mean that we don't need the default tranceiver anymore.Stuntteam wrote:Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver
I ordered a cc in advance for my ws4000 weather station.
Verstuurd vanaf mijn SM-G920F met Tapatalk
Last edited by Btje on Tuesday 11 October 2016 11:01, edited 1 time in total.
- Stuntteam
- Posts: 399
- Joined: Wednesday 06 May 2015 16:39
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
No, although the chip itself can handle multiple frequencies, the modules that contain the cc1101 have additional hardware that limits the frequency.
For now we are working on the 868 mhz version to add support for various devices that are so far unsupported..
For now we are working on the 868 mhz version to add support for various devices that are so far unsupported..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- Posts: 22
- Joined: Wednesday 05 October 2016 7:46
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: Ikea Ansluta remote (2.4GHz)
I ordered this module:
https://nl.aliexpress.com/item/CC1101-W ... bff814a668
It states more freq. Bit confusing. I understand that the RF part in some cases would need to change.
https://nl.aliexpress.com/item/CC1101-W ... bff814a668
It states more freq. Bit confusing. I understand that the RF part in some cases would need to change.
Who is online
Users browsing this forum: No registered users and 0 guests