Ikea Ansluta remote (2.4GHz)

Hesmink · Post by **Hesmink** » Wednesday 12 August 2015 18:15

I'm considering to use Ikea kitchen lighting.
This can be remote controlled by the Ansluta remote, working on 2.4GHz. http://www.ikea.com/us/en/catalog/products/80288328/

Does anyone have any experience with controlling this from Domoticz?

ThinkPad · Post by **ThinkPad** » Monday 17 August 2015 14:36

Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.

Hesmink · Post by **Hesmink** » Monday 17 August 2015 14:56

ThinkPad wrote:Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.

That would be nice, and if implemented, for me a reason to buy one.

Hesmink · Post by **Hesmink** » Sunday 11 September 2016 20:24

ThinkPad wrote:Maybe with the RFLink project. It has a nRF24L01+ transceiver on board for 2,4Ghz communications.
But it is not used yet in the code of the RFLink.

Is this already available?
I ordered an RFLink, but are still waiting for the rest I need from China.

Stuntteam · Post by **Stuntteam** » Thursday 06 October 2016 0:22

Indeed this is now working in the RFLink lab.. both receive and transmit.

Hesmink · Post by **Hesmink** » Thursday 06 October 2016 9:10

Very good news!

Derik · Post by **Derik** » Thursday 06 October 2016 16:10

mmm

Perhaps you can tell me what hardware is working in the lab....
When i am @ Ikea can i order some hardware....

Great job

Stuntteam · Post by **Stuntteam** » Thursday 06 October 2016 20:16

See the wiring page on www.nemcon.nl/blog2
Near the bottom it shows 3 working CC2500 modules...

Derik · Post by **Derik** » Thursday 06 October 2016 21:39

mm looking Fu#%^&$%cking great....
I do have a "RFlink Gateway Gesoldeerd " v.1.1

: WP_20161006_21_12_45_Pro.jpg (249.01 KiB) Viewed 8009 times

Do i need to make modifications?
Or can i use all the new stuff?

Stuntteam · Post by **Stuntteam** » Friday 07 October 2016 8:53

You need to add the CC2500 and since that one does not like the 5 volt signals you also need to add a level shifter inbteween the signals.
Like these: https://nl.aliexpress.com/item/5PCS-IIC ... 21005.html

Hesmink · Post by **Hesmink** » Friday 07 October 2016 10:57

Stuntteam wrote:You need to add the CC2500 and since that one does not like the 5 volt signals you also need to add a level shifter inbteween the signals.
Like these: https://nl.aliexpress.com/item/5PCS-IIC ... 21005.html

I have a 433Mhz RFLink per-soldered and a NRF24L01 on top of it.
I was under the impression the NRF24L01 was also a 2.4GHz tranceiver?

Stuntteam · Post by **Stuntteam** » Friday 07 October 2016 11:07

Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver

Hesmink · Post by **Hesmink** » Friday 07 October 2016 12:12

Stuntteam wrote:Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver

Ok.
Is there a solderless solution I can plug in the existing board?

Hesmink · Post by **Hesmink** » Monday 10 October 2016 14:21

Well, I have a working RFLink (without CC2500 though) and some Ansluta stuff, so I'm ready to try it out as soon as it's available.
(And hopefully doable without much soldering).

Derik · Post by **Derik** » Monday 10 October 2016 18:06

@ Stuntteam,

Please can you ad some more details.
i do not understand what i need to solder and the diff rents between NRF24 for Ikea and the NRF24 for the Milight..?
Example what is my NRF24 now for?

Stuntteam · Post by **Stuntteam** » Tuesday 11 October 2016 0:13

RFlink is modular.. this means you can hook various transceivers to the mega and use their different abilities.
Milight communication is done using a NRF24L01.
Ikea Ansluta communication is done with a CC2500 transceiver. The reason that it does not work with the NRF as well is because a different form of modulation is used, modulations is the way 2 sides talk to eachother..

Btje · Post by **Btje** » Tuesday 11 October 2016 7:30

Stuntteam wrote:Yes, the NRF24 is also 2.4 Ghz but can not handle the modulation required for the additional devices..
We will soon also be adding support for the CC1101 - 868 mhz transceiver

I see that the cc1101 is also capable of 433 mhz. Will this mean that we don't need the default tranceiver anymore.

I ordered a cc in advance for my ws4000 weather station.

Verstuurd vanaf mijn SM-G920F met Tapatalk

Stuntteam · Post by **Stuntteam** » Tuesday 11 October 2016 9:02

No, although the chip itself can handle multiple frequencies, the modules that contain the cc1101 have additional hardware that limits the frequency.
For now we are working on the 868 mhz version to add support for various devices that are so far unsupported..

Btje · Post by **Btje** » Tuesday 11 October 2016 11:08

I ordered this module:

https://nl.aliexpress.com/item/CC1101-W ... bff814a668

It states more freq. Bit confusing. I understand that the RF part in some cases would need to change.

Btje · Post by **Btje** » Tuesday 11 October 2016 11:11

Or did I need to by this one:

https://nl.aliexpress.com/item/Free-shi ... 0e5371e6ee

Ikea Ansluta remote (2.4GHz)

Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: RE: Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Re: Ikea Ansluta remote (2.4GHz)

Who is online