MyDomoticz - Testers wanted!
Moderator: leecollings
-
- Posts: 49
- Joined: Thursday 17 December 2015 22:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Norway
- Contact:
Re: Testers wanted!
mine is still red unfortunately
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
zWave (220v switches)
various 433 via RFLink
Re: Testers wanted!
Was the mine to.
Enabled shared apps then u get green perhaps
Enabled shared apps then u get green perhaps
Last edited by spikehome on Sunday 20 March 2016 20:40, edited 1 time in total.
- Minglarn
- Posts: 214
- Joined: Friday 21 August 2015 19:27
- Target OS: Raspberry Pi / ODroid
- Domoticz version: v3.8153
- Location: Stockholm / Sweden
- Contact:
Re: Testers wanted!
Mine is dead too. It works well for about 30min and then it disconnects.
It could be Domoticz who have issues but I'm not sure.
It could be Domoticz who have issues but I'm not sure.
“When you eliminate the impossible, whatever remains, however improbable, must be the truth.” -Spock in Star Trek VI
Re: Testers wanted!
Here it still works
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: Testers wanted!
Mine it's working too, but I cannot display device values in frontpage.html if I go to https://my.domoticz.com/my/xxxxxxxx/frontpage.html.
In the dashboard all is ok.
In the dashboard all is ok.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
Re: Testers wanted!
When i go to frontpage.html i het offline.
At the settings of domoticz at my.domoticz is apps enabeld?
At the settings of domoticz at my.domoticz is apps enabeld?
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: Testers wanted!
Apps were not enabled.spikehome wrote:When i go to frontpage.html i het offline.
At the settings of domoticz at my.domoticz is apps enabeld?
Now I have enabled, rebooted (just in case), but still no values...
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
Re: Testers wanted!
When u login at my.domoticz the man is nog green?
It also takes a few minutes so far i found out.
And with apps disabeld it was nog working with me.
It also takes a few minutes so far i found out.
And with apps disabeld it was nog working with me.
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: Testers wanted!
The man in the my.domoticz, after logging in, is green.
Then I get request for user login, I have defined users, and I login with the admin user that have access to everything and every devices.
In dashboard all ok, in frontpage no.
Apps are allowed now.
Then I get request for user login, I have defined users, and I login with the admin user that have access to everything and every devices.
In dashboard all ok, in frontpage no.
Apps are allowed now.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: Testers wanted!
Now it's not working... Just the commodore 64 page.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
-
- Posts: 476
- Joined: Monday 14 March 2016 13:55
- Target OS: Linux
- Domoticz version: beta
- Location: Rome, Italy
- Contact:
Re: Testers wanted!
I'm still getting no values for devices.woody4165 wrote:The man in the my.domoticz, after logging in, is green.
Then I get request for user login, I have defined users, and I login with the admin user that have access to everything and every devices.
In dashboard all ok, in frontpage no.
Apps are allowed now.
It's the same if I go thru ddns.
Apps are enabled.
Any suggestion?
Thanks
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
-
- Posts: 49
- Joined: Thursday 17 December 2015 22:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Norway
- Contact:
Re: Testers wanted!
Still doesn't work for me, little guy is red after logging in.spikehome wrote:Was the mine to.
Enabled shared apps then u get green perhaps
I then tried to "revoke the system" and enter data again, now my system is not appearing on my.domoticz.com. I tried restarting it few times, entering and saving API key and pass, still nothing.
I do not have 2steps verification.
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
zWave (220v switches)
various 433 via RFLink
-
- Posts: 49
- Joined: Thursday 17 December 2015 22:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Norway
- Contact:
Re: Testers wanted!
and after few restarts now the green guy is back and remote control works fine. Life is worth living again...
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
zWave (220v switches)
various 433 via RFLink
-
- Posts: 16
- Joined: Tuesday 23 February 2016 14:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Testers wanted!
Problem with frontpage - in my domoticz is FlatZ - is that frontpage is operating on local IP and you call it from outside network.
In www/settings/settings.js i changet this:
into this:
Now it works, but if there isn't connection with MyDomoticz, local addres of frontpage won't work.
In www/settings/settings.js i changet this:
Code: Select all
$.domoticzurl = "http://XXX.XXX.XXX.XXX:8080"
Code: Select all
$.domoticzurl = "https://my.domoticz.com/my/A48BD36E8ECA577"
- chimit
- Posts: 259
- Joined: Saturday 18 April 2015 18:55
- Target OS: Raspberry Pi / ODroid
- Domoticz version: master
- Location: Rotterdam, the Netherlands
- Contact:
Re: Testers wanted!
Not sure what you want to accomplish. But you shouldn't be having to change anything in the sources files.codesnipper wrote:Problem with frontpage - in my domoticz is FlatZ - is that frontpage is operating on local IP and you call it from outside network.
In www/settings/settings.js i changet this:
into this:Code: Select all
$.domoticzurl = "http://XXX.XXX.XXX.XXX:8080"
Now it works, but if there isn't connection with MyDomoticz, local addres of frontpage won't work.Code: Select all
$.domoticzurl = "https://my.domoticz.com/my/A48BD36E8ECA577"
-
- Posts: 16
- Joined: Tuesday 23 February 2016 14:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Testers wanted!
It is not source file - it's file with settings for FlatZ frontpage. You have to edit it when you install this frontpage.
-
- Posts: 583
- Joined: Wednesday 16 December 2015 19:13
- Target OS: NAS (Synology & others)
- Domoticz version: 2022.2
- Location: Netherlands
- Contact:
Re: Testers wanted!
i just voluntered for my Domoticz and i must say it works right out of the box.
on an iphone safari is not keeping track of username and password(forgot auto fill in)
i however use ewallet where i can put everything which passes it along to the mydomoticz page.
2 clicks and i am in.
responsetimes are really faster then when i use the philips hue app the same way.
with HUe it takes 5-6 seconds before lights react.
wit mydomoticz it takes 1 second.
nice work.
my setup
Synology 112+
DSM 6
domoticz 5019
on an iphone safari is not keeping track of username and password(forgot auto fill in)
i however use ewallet where i can put everything which passes it along to the mydomoticz page.
2 clicks and i am in.
responsetimes are really faster then when i use the philips hue app the same way.
with HUe it takes 5-6 seconds before lights react.
wit mydomoticz it takes 1 second.
nice work.
my setup
Synology 112+
DSM 6
domoticz 5019
- chimit
- Posts: 259
- Joined: Saturday 18 April 2015 18:55
- Target OS: Raspberry Pi / ODroid
- Domoticz version: master
- Location: Rotterdam, the Netherlands
- Contact:
Re: Testers wanted!
Update: Just edited the Wiki at https://www.domoticz.com/wiki/MyDomoticz. The alpha phase is over for a while already. Now we reached Beta status.
We are almost reaching 300 Domoticz's online simultaneously at the moment.
We are almost reaching 300 Domoticz's online simultaneously at the moment.
-
- Posts: 16
- Joined: Tuesday 23 February 2016 14:04
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Testers wanted!
After sucesfull start I have errors (11 minutes from start):
2016-04-02 15:44:17.530 Error: PROXY: Read failed, code = 335544539. Reconnecting: short read
2016-04-02 15:44:59.024 Error: PROXY: Handshake failed, reconnecting: short read
2016-04-02 15:44:17.530 Error: PROXY: Read failed, code = 335544539. Reconnecting: short read
2016-04-02 15:44:59.024 Error: PROXY: Handshake failed, reconnecting: short read
-
- Posts: 583
- Joined: Wednesday 16 December 2015 19:13
- Target OS: NAS (Synology & others)
- Domoticz version: 2022.2
- Location: Netherlands
- Contact:
Re: Testers wanted!
i have the same.
i think sometimes mydomoitcz looses connection.
connection is up most of the time(green) so no problems here
i think sometimes mydomoitcz looses connection.
connection is up most of the time(green) so no problems here
2016-04-02 23:53:21.526 Error: PROXY: timeout occurred, reconnecting
2016-04-02 23:53:21.526 Error: PROXY: Read failed, code = 125. Reconnecting: Operation canceled
2016-04-02 23:54:43.546 Error: PROXY: Connect failed, reconnecting: Connection timed out
2016-04-03 07:35:57.264 Error: PROXY: Read failed, code = 335544539. Reconnecting: short read
Who is online
Users browsing this forum: No registered users and 1 guest