MyDomoticz - Testers wanted!

On various Hardware and OS systems: pi / windows / routers / nas, etc

Moderator: leecollings

dakipro
Posts: 49
Joined: Thursday 17 December 2015 22:24
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.5877
Location: Norway
Contact:

Re: Testers wanted!

Post by dakipro »

mine is still red unfortunately :(
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
spikehome
Posts: 24
Joined: Friday 04 March 2016 15:13
Target OS: -
Domoticz version:
Contact:

Re: Testers wanted!

Post by spikehome »

Was the mine to.
Enabled shared apps then u get green perhaps
Last edited by spikehome on Sunday 20 March 2016 20:40, edited 1 time in total.
User avatar
Minglarn
Posts: 214
Joined: Friday 21 August 2015 19:27
Target OS: Raspberry Pi / ODroid
Domoticz version: v3.8153
Location: Stockholm / Sweden
Contact:

Re: Testers wanted!

Post by Minglarn »

Mine is dead too. It works well for about 30min and then it disconnects.

It could be Domoticz who have issues but I'm not sure.
When you eliminate the impossible, whatever remains, however improbable, must be the truth.” -Spock in Star Trek VI
spikehome
Posts: 24
Joined: Friday 04 March 2016 15:13
Target OS: -
Domoticz version:
Contact:

Re: Testers wanted!

Post by spikehome »

Here it still works
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Testers wanted!

Post by woody4165 »

Mine it's working too, but I cannot display device values in frontpage.html if I go to https://my.domoticz.com/my/xxxxxxxx/frontpage.html.

In the dashboard all is ok.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
spikehome
Posts: 24
Joined: Friday 04 March 2016 15:13
Target OS: -
Domoticz version:
Contact:

Re: Testers wanted!

Post by spikehome »

When i go to frontpage.html i het offline.
At the settings of domoticz at my.domoticz is apps enabeld?
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Testers wanted!

Post by woody4165 »

spikehome wrote:When i go to frontpage.html i het offline.
At the settings of domoticz at my.domoticz is apps enabeld?
Apps were not enabled.
Now I have enabled, rebooted (just in case), but still no values...
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
spikehome
Posts: 24
Joined: Friday 04 March 2016 15:13
Target OS: -
Domoticz version:
Contact:

Re: Testers wanted!

Post by spikehome »

When u login at my.domoticz the man is nog green?
It also takes a few minutes so far i found out.
And with apps disabeld it was nog working with me.
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Testers wanted!

Post by woody4165 »

The man in the my.domoticz, after logging in, is green.
Then I get request for user login, I have defined users, and I login with the admin user that have access to everything and every devices.

In dashboard all ok, in frontpage no.

Apps are allowed now.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Testers wanted!

Post by woody4165 »

Now it's not working... Just the commodore 64 page.
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: Testers wanted!

Post by woody4165 »

woody4165 wrote:The man in the my.domoticz, after logging in, is green.
Then I get request for user login, I have defined users, and I login with the admin user that have access to everything and every devices.

In dashboard all ok, in frontpage no.

Apps are allowed now.
I'm still getting no values for devices.
It's the same if I go thru ddns.

Apps are enabled.

Any suggestion?

Thanks
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
dakipro
Posts: 49
Joined: Thursday 17 December 2015 22:24
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.5877
Location: Norway
Contact:

Re: Testers wanted!

Post by dakipro »

spikehome wrote:Was the mine to.
Enabled shared apps then u get green perhaps
Still doesn't work for me, little guy is red after logging in.

I then tried to "revoke the system" and enter data again, now my system is not appearing on my.domoticz.com. I tried restarting it few times, entering and saving API key and pass, still nothing.
I do not have 2steps verification.
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
dakipro
Posts: 49
Joined: Thursday 17 December 2015 22:24
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.5877
Location: Norway
Contact:

Re: Testers wanted!

Post by dakipro »

and after few restarts now the green guy is back and remote control works fine. Life is worth living again...
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
codesnipper
Posts: 16
Joined: Tuesday 23 February 2016 14:04
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Testers wanted!

Post by codesnipper »

Problem with frontpage - in my domoticz is FlatZ - is that frontpage is operating on local IP and you call it from outside network.

In www/settings/settings.js i changet this:

Code: Select all

$.domoticzurl = "http://XXX.XXX.XXX.XXX:8080"
into this:

Code: Select all

$.domoticzurl = "https://my.domoticz.com/my/A48BD36E8ECA577"
Now it works, but if there isn't connection with MyDomoticz, local addres of frontpage won't work.
User avatar
chimit
Posts: 259
Joined: Saturday 18 April 2015 18:55
Target OS: Raspberry Pi / ODroid
Domoticz version: master
Location: Rotterdam, the Netherlands
Contact:

Re: Testers wanted!

Post by chimit »

codesnipper wrote:Problem with frontpage - in my domoticz is FlatZ - is that frontpage is operating on local IP and you call it from outside network.

In www/settings/settings.js i changet this:

Code: Select all

$.domoticzurl = "http://XXX.XXX.XXX.XXX:8080"
into this:

Code: Select all

$.domoticzurl = "https://my.domoticz.com/my/A48BD36E8ECA577"
Now it works, but if there isn't connection with MyDomoticz, local addres of frontpage won't work.
Not sure what you want to accomplish. But you shouldn't be having to change anything in the sources files.
codesnipper
Posts: 16
Joined: Tuesday 23 February 2016 14:04
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Testers wanted!

Post by codesnipper »

It is not source file - it's file with settings for FlatZ frontpage. You have to edit it when you install this frontpage.
Gravityz
Posts: 583
Joined: Wednesday 16 December 2015 19:13
Target OS: NAS (Synology & others)
Domoticz version: 2022.2
Location: Netherlands
Contact:

Re: Testers wanted!

Post by Gravityz »

i just voluntered for my Domoticz and i must say it works right out of the box.

on an iphone safari is not keeping track of username and password(forgot auto fill in)
i however use ewallet where i can put everything which passes it along to the mydomoticz page.
2 clicks and i am in.
responsetimes are really faster then when i use the philips hue app the same way.
with HUe it takes 5-6 seconds before lights react.
wit mydomoticz it takes 1 second.

nice work.

my setup

Synology 112+
DSM 6
domoticz 5019
User avatar
chimit
Posts: 259
Joined: Saturday 18 April 2015 18:55
Target OS: Raspberry Pi / ODroid
Domoticz version: master
Location: Rotterdam, the Netherlands
Contact:

Re: Testers wanted!

Post by chimit »

Update: Just edited the Wiki at https://www.domoticz.com/wiki/MyDomoticz. The alpha phase is over for a while already. Now we reached Beta status.
We are almost reaching 300 Domoticz's online simultaneously at the moment.
codesnipper
Posts: 16
Joined: Tuesday 23 February 2016 14:04
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Testers wanted!

Post by codesnipper »

After sucesfull start I have errors (11 minutes from start):

2016-04-02 15:44:17.530 Error: PROXY: Read failed, code = 335544539. Reconnecting: short read
2016-04-02 15:44:59.024 Error: PROXY: Handshake failed, reconnecting: short read
Gravityz
Posts: 583
Joined: Wednesday 16 December 2015 19:13
Target OS: NAS (Synology & others)
Domoticz version: 2022.2
Location: Netherlands
Contact:

Re: Testers wanted!

Post by Gravityz »

i have the same.

i think sometimes mydomoitcz looses connection.
connection is up most of the time(green) so no problems here
2016-04-02 23:53:21.526 Error: PROXY: timeout occurred, reconnecting
2016-04-02 23:53:21.526 Error: PROXY: Read failed, code = 125. Reconnecting: Operation canceled
2016-04-02 23:54:43.546 Error: PROXY: Connect failed, reconnecting: Connection timed out
2016-04-03 07:35:57.264 Error: PROXY: Read failed, code = 335544539. Reconnecting: short read
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests