Python Plugin: Shelly MQTT

[josemi]

Does anybody have working long push in a Shelly 2.5 working as roller mode?
I enable debug option in plugin, but only short push is shown. No longpush device is created in domoticz either.

[Gerwin]

hello ,
thanks a lot for these nice plugin ,
everything is working except the temperature addon for the shelly 1
is there an opportunity that this addon also available coming in this plugin ??

Gerwin

[bewo]

@Gerwin:
https://github.com/enesbcs/Shelly_MQTT/issues/41

[Gerwin]

@bewo

Thanks

Gerwin

[djac]

Trying to update Plugin but get:

"error: Your local changes to the following files would be overwritten by merge:
plugin.py
Please, commit your changes or stash them before you can merge."

Any suggestions?

[Geitje]

If you Google it, you find some answers, I warns you probably to prevent to overwrite your local changes. You can solve it. Check out for example:
https://stackoverflow.com/questions/157 ... you-can-me

[Gerwin]

hello
i have seen that the themperature addon is implemented how can i update ?
can someone explain step by step how to do this
i have a lot of shelly's

Gerwin

[Gerwin]

hello
i have seen that the themperature addon is implemented how can i update ?
can someone explain step by step how to do this
i have a lot of shelly's

Gerwin

I know how to do
works great

Gerwin

[fabry91]

Hello guys,

I'm trying to get it work, I have a Shelly 1 V3, successfully installed and started the Shelly plugin.

Problem is that I cannot make it work the on/off switch from domoticz to the shelly 1 relay, I'm attaching the configuration of tasmota flashed firmware on my shelly 1 and the logs result when I tried to switch on the mqtt switch created itself by domoticz.

Thank you in advance and stay safe

[besix]

Hello
The Shelly plugin requires the original soft Shelly.
If you have Tasmota, this is only the mqtt broker but without the Shelly plugin

[fabry91]

Hello
The Shelly plugin requires the original soft Shelly.
If you have Tasmota, this is only the mqtt broker but without the Shelly plugin

Thank you very much besix, I didn't understood that It was only for the stock shelly firmware.
I have now successfully started the MQTT Client Gateway and I am now controlling the shelly1 relay!

Thanks!!!

[Derik]

I now strange only i ask this here..
Is there perhaps some one that have shelly with Domoticz working without a plugin?
It looks to me that shely and Domotiz talk mqtt, this must be possible without a plugin?
Just a nodered or something?

for 1 shely a plugin, that's the point

[LouiS22]

I now strange only i ask this here..
Is there perhaps some one that have shelly with Domoticz working without a plugin?
It looks to me that shely and Domotiz talk mqtt, this must be possible without a plugin?
Just a nodered or something?

for 1 shely a plugin, that's the point

Just below this post at python's topic

viewtopic.php?f=65&t=32616

[mattley30]

Hi Guys,
I'm trying a scelly 1 with the additional external temperature sensor. inside the shelly1 I regularly display the temperature of 25.8 ° while on Domoticz the component created "LaCrosse TX3" with a value of "0". but I see that the update comes every minute.
Yet doing a dubug the message mqtt arrives.
2020-07-02 20: 05: 44.499 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature / 0: 25.88
2020-07-02 20: 05: 44.509 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature_f / 0: 78.58
do you know what it could be?
Thanks
Mattely30

[mattley30]

Hello again
problem returned I realized that there was a shelly1 firmware update to do, once updated the temperature sensor data arrived, sorry.
Thanks
Mattley30

[niekbruggeman]

I can confirm that the new shelly dimmer 2 works correct with Domoticz.
I use the native firmware of the Shelly, and the Shelly MQTT plugin for Domoticz 2020.2.

[Pascal1978]

Hello,

I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.

can anyone help me out or point me in the right direction

thnx

[Gerwin]

Hello,

The Shelly button is that one impemented ???
does someone knows that

Gerwin

[Gerwin]

Hello,

I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.

can anyone help me out or point me in the right direction

thnx

you can make groups for each collor you want

[Delfuego]

Hello,

I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.

can anyone help me out or point me in the right direction

thnx

Hi Pascal,

You can send a switch command directly to you Shelly RGBW2 device using DzVentz:

Code: Select all

return {
	on = {
		devices = {'Switch to call this script'},
		},
	execute = function(domoticz, device)
        domoticz.openURL({url = 'http://192.168.0.50/color/0?turn=on&red=255&green=86&blue=112&white=0'})
	end
}

The gradient effect you have to code yourself I think by sending an updated color to your device every second or so until you reach your desired color.

Also check the following links to Shelly documentation:
https://shelly.cloud/documents/develope ... cation.pdf
https://shelly-api-docs.shelly.cloud/?f ... y-overview

Kind regards,

Luuk