Python Plugin: Shelly MQTT
Moderator: leecollings
-
- Posts: 31
- Joined: Thursday 08 March 2018 16:48
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
Does anybody have working long push in a Shelly 2.5 working as roller mode?
I enable debug option in plugin, but only short push is shown. No longpush device is created in domoticz either.
I enable debug option in plugin, but only short push is shown. No longpush device is created in domoticz either.
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
hello ,
thanks a lot for these nice plugin ,
everything is working except the temperature addon for the shelly 1
is there an opportunity that this addon also available coming in this plugin ??
Gerwin
thanks a lot for these nice plugin ,
everything is working except the temperature addon for the shelly 1
is there an opportunity that this addon also available coming in this plugin ??
Gerwin
- bewo
- Posts: 74
- Joined: Monday 13 July 2015 12:27
- Target OS: Linux
- Domoticz version: 2021.1
- Location: Bavaria - Germany
- Contact:
Re: Python Plugin: Shelly MQTT
Individual projects:
Domoticz on a Intel Xeon Server | AeonLabs Z-Wave Gen.5 | RFXCOM RFXtrx433E USB | ESP-Wifi-Modules | Shellys
Wall-mounted 22" Touch Control Display (self construct) | LUA wind monitor| LUA heating control | and many many more :)
Domoticz on a Intel Xeon Server | AeonLabs Z-Wave Gen.5 | RFXCOM RFXtrx433E USB | ESP-Wifi-Modules | Shellys
Wall-mounted 22" Touch Control Display (self construct) | LUA wind monitor| LUA heating control | and many many more :)
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
@bewo
Thanks
Gerwin
Thanks
Gerwin
-
- Posts: 28
- Joined: Tuesday 24 October 2017 9:41
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
Trying to update Plugin but get:
"error: Your local changes to the following files would be overwritten by merge:
plugin.py
Please, commit your changes or stash them before you can merge."
Any suggestions?
"error: Your local changes to the following files would be overwritten by merge:
plugin.py
Please, commit your changes or stash them before you can merge."
Any suggestions?
Domoticz on Rpi, Z-wave, Hue with Philips and Ikea bulbs
-
- Posts: 170
- Joined: Monday 22 January 2018 21:52
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
If you Google it, you find some answers, I warns you probably to prevent to overwrite your local changes. You can solve it. Check out for example:
https://stackoverflow.com/questions/157 ... you-can-me
https://stackoverflow.com/questions/157 ... you-can-me
Domoticz beta, on Raspberry Pi 3B, Raspian Buster
Zwave, Zigate, RFlink etc.
Zwave, Zigate, RFlink etc.
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
hello
i have seen that the themperature addon is implemented how can i update ?
can someone explain step by step how to do this
i have a lot of shelly's
Gerwin
i have seen that the themperature addon is implemented how can i update ?
can someone explain step by step how to do this
i have a lot of shelly's
Gerwin
- fabry91
- Posts: 67
- Joined: Sunday 09 December 2018 16:52
- Target OS: NAS (Synology & others)
- Domoticz version: 2022.2
- Location: Italy
- Contact:
Re: Python Plugin: Shelly MQTT
Hello guys,
I'm trying to get it work, I have a Shelly 1 V3, successfully installed and started the Shelly plugin.
Problem is that I cannot make it work the on/off switch from domoticz to the shelly 1 relay, I'm attaching the configuration of tasmota flashed firmware on my shelly 1 and the logs result when I tried to switch on the mqtt switch created itself by domoticz.
Thank you in advance and stay safe
I'm trying to get it work, I have a Shelly 1 V3, successfully installed and started the Shelly plugin.
Problem is that I cannot make it work the on/off switch from domoticz to the shelly 1 relay, I'm attaching the configuration of tasmota flashed firmware on my shelly 1 and the logs result when I tried to switch on the mqtt switch created itself by domoticz.
Thank you in advance and stay safe
- Attachments
-
- mqtt_shelly.jpg (60.48 KiB) Viewed 2652 times
-
- domoticz_logs.jpg (93.78 KiB) Viewed 2652 times
-
- Posts: 99
- Joined: Friday 25 January 2019 11:33
- Target OS: Linux
- Domoticz version: beta
- Location: Poland
- Contact:
Re: Python Plugin: Shelly MQTT
Hello
The Shelly plugin requires the original soft Shelly.
If you have Tasmota, this is only the mqtt broker but without the Shelly plugin
The Shelly plugin requires the original soft Shelly.
If you have Tasmota, this is only the mqtt broker but without the Shelly plugin
- fabry91
- Posts: 67
- Joined: Sunday 09 December 2018 16:52
- Target OS: NAS (Synology & others)
- Domoticz version: 2022.2
- Location: Italy
- Contact:
Re: Python Plugin: Shelly MQTT
Thank you very much besix, I didn't understood that It was only for the stock shelly firmware.
I have now successfully started the MQTT Client Gateway and I am now controlling the shelly1 relay!
Thanks!!!
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: Python Plugin: Shelly MQTT
I now strange only i ask this here..
Is there perhaps some one that have shelly with Domoticz working without a plugin?
It looks to me that shely and Domotiz talk mqtt, this must be possible without a plugin?
Just a nodered or something?
for 1 shely a plugin, that's the point
Is there perhaps some one that have shelly with Domoticz working without a plugin?
It looks to me that shely and Domotiz talk mqtt, this must be possible without a plugin?
Just a nodered or something?
for 1 shely a plugin, that's the point
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
- LouiS22
- Posts: 433
- Joined: Friday 27 February 2015 13:21
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Budapest, Hungary
- Contact:
Re: Python Plugin: Shelly MQTT
Just below this post at python's topicDerik wrote: ↑Sunday 10 May 2020 10:18 I now strange only i ask this here..
Is there perhaps some one that have shelly with Domoticz working without a plugin?
It looks to me that shely and Domotiz talk mqtt, this must be possible without a plugin?
Just a nodered or something?
for 1 shely a plugin, that's the point
viewtopic.php?f=65&t=32616
-
- Posts: 7
- Joined: Tuesday 24 September 2019 9:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
Hi Guys,
I'm trying a scelly 1 with the additional external temperature sensor. inside the shelly1 I regularly display the temperature of 25.8 ° while on Domoticz the component created "LaCrosse TX3" with a value of "0". but I see that the update comes every minute.
Yet doing a dubug the message mqtt arrives.
2020-07-02 20: 05: 44.499 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature / 0: 25.88
2020-07-02 20: 05: 44.509 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature_f / 0: 78.58
do you know what it could be?
Thanks
Mattely30
I'm trying a scelly 1 with the additional external temperature sensor. inside the shelly1 I regularly display the temperature of 25.8 ° while on Domoticz the component created "LaCrosse TX3" with a value of "0". but I see that the update comes every minute.
Yet doing a dubug the message mqtt arrives.
2020-07-02 20: 05: 44.499 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature / 0: 25.88
2020-07-02 20: 05: 44.509 (Shelly Actuators) MQTT message: shellies / shelly1-8CAAB505BBAC / ext_temperature_f / 0: 78.58
do you know what it could be?
Thanks
Mattely30
-
- Posts: 7
- Joined: Tuesday 24 September 2019 9:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
Hello again
problem returned I realized that there was a shelly1 firmware update to do, once updated the temperature sensor data arrived, sorry.
Thanks
Mattley30
problem returned I realized that there was a shelly1 firmware update to do, once updated the temperature sensor data arrived, sorry.
Thanks
Mattley30
-
- Posts: 5
- Joined: Monday 30 October 2017 10:29
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
I can confirm that the new shelly dimmer 2 works correct with Domoticz.
I use the native firmware of the Shelly, and the Shelly MQTT plugin for Domoticz 2020.2.
I use the native firmware of the Shelly, and the Shelly MQTT plugin for Domoticz 2020.2.
-
- Posts: 3
- Joined: Sunday 10 May 2020 9:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: Nederland
- Contact:
Re: Python Plugin: Shelly MQTT
Hello,
I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.
can anyone help me out or point me in the right direction
thnx
I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.
can anyone help me out or point me in the right direction
thnx
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
Hello,
The Shelly button is that one impemented ???
does someone knows that
Gerwin
The Shelly button is that one impemented ???
does someone knows that
Gerwin
-
- Posts: 84
- Joined: Friday 12 August 2016 13:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Python Plugin: Shelly MQTT
you can make groups for each collor you wantPascal1978 wrote: ↑Friday 24 July 2020 22:55 Hello,
I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.
can anyone help me out or point me in the right direction
thnx
- Attachments
-
- group1.gif (148.92 KiB) Viewed 2226 times
-
- Posts: 32
- Joined: Sunday 29 July 2018 16:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2020.2
- Location: The Netherlands
- Contact:
Re: Python Plugin: Shelly MQTT
Hi Pascal,Pascal1978 wrote: ↑Friday 24 July 2020 22:55 Hello,
I don't know if i'm posting it on the right place here, but i want to control my RGBW2 Shelly device with automatic color change.
i want to setup a sunrise color which flow over to daylight and at a specifick time to sunset and then to moonlight.
I have tried to set it with dzvents, but i don't know the right codes to set the colors let alone how to set it at different times and how to gradient
i want to use it for my aquarium lights.
can anyone help me out or point me in the right direction
thnx
You can send a switch command directly to you Shelly RGBW2 device using DzVentz:
Code: Select all
return {
on = {
devices = {'Switch to call this script'},
},
execute = function(domoticz, device)
domoticz.openURL({url = 'http://192.168.0.50/color/0?turn=on&red=255&green=86&blue=112&white=0'})
end
}
Also check the following links to Shelly documentation:
https://shelly.cloud/documents/develope ... cation.pdf
https://shelly-api-docs.shelly.cloud/?f ... y-overview
Kind regards,
Luuk
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 1 guest