Dashticz - Bug report

[aiolos]

I have the same problem with the blinds switches not working (anymore).

The problem is in switches.js, function switchBlinds()
.block should be .block_

Code: Select all

function switchBlinds(idx, action) {
	switch (action.toLowerCase()) {
        case 'off':
            $('.block_' + idx).find('.icon').removeClass('on').addClass('off');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('open', 'closed'));
            break;
        case 'on':
            $('.block_' + idx).find('.icon').removeClass('off').addClass('on');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('closed', 'open'));
            break;
    }

    if (typeof(req) !== 'undefined') req.abort();
    $.ajax({
        url: settings['domoticz_ip'] + '/json.htm?type=command&param=switchlight&idx=' + idx + '&switchcmd=' + action + '&level=0&passcode=&jsoncallback=?',
        type: 'GET', async: false, contentType: 'application/json', dataType: 'jsonp',
        success: function (data) {
            getDevices(true);
        }
    });
}

That was indeed the function that had the bug. A fix for it was already merged today, so if you get the latest beta, it should work again.

I just saw there is another _ missing, but that it only a layout fix I think. I will create a PR for that.

[barbaar]

My blinds are still being displayed as on/off switches. I have 2 "blinds inverted percentage". Just did a git pull, but no change for me

[aiolos]

My blinds are still being displayed as on/off switches. I have 2 "blinds inverted percentage". Just did a git pull, but no change for me

You are right, that one is showing up as switch. I will see why that happens.

Edit:
The order of words was wrong, see this PR

[barbaar]

My blinds are still being displayed as on/off switches. I have 2 "blinds inverted percentage". Just did a git pull, but no change for me

You are right, that one is showing up as switch. I will see why that happens.

Edit:
The order of words was wrong, see this PR

Works, thanks!

[robgeerts]

I think graphs ont work with all types of sensors yet.
Whats the output of these devices from Domoticz?

Find it here:
http://YOURIP_AND_PORT/json.htm?type=devices

Spoiler: show

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Humidity 64 %",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 7,
"HardwareName" : "Xiaomi Gateway",
"HardwareType" : "Xiaomi Gateway",
"HardwareTypeVal" : 95,
"HaveTimeout" : false,
"Humidity" : 64,
"HumidityStatus" : "Wet",
"ID" : "2AFE",
"LastUpdate" : "2018-01-04 12:29:42",
"Name" : "Badkamer Vochtigheid",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "LaCrosse TX3",
"Timers" : "false",
"Type" : "Humidity",
"TypeImg" : "temperature",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "51"

For example

I just changed something.
Could you test latest beta???

Is it because a login for Domoticz is required?
This does not work also:
In de CONFIG.js kunnen je logingegevens staan als je gebruik maakt van "http://username:[email protected]"

I think so, entering username and password in the url is not supported anymore in newer version of some browsers.
You can switch to another login-method in Domoticz-settings, although, then you have to enter login at every load of Dashticz..

I have the same problem with the blinds switches not working (anymore).

The problem is in switches.js, function switchBlinds()
.block should be .block_

Code: Select all

function switchBlinds(idx, action) {
	switch (action.toLowerCase()) {
        case 'off':
            $('.block_' + idx).find('.icon').removeClass('on').addClass('off');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('open', 'closed'));
            break;
        case 'on':
            $('.block_' + idx).find('.icon').removeClass('off').addClass('on');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('closed', 'open'));
            break;
    }

    if (typeof(req) !== 'undefined') req.abort();
    $.ajax({
        url: settings['domoticz_ip'] + '/json.htm?type=command&param=switchlight&idx=' + idx + '&switchcmd=' + action + '&level=0&passcode=&jsoncallback=?',
        type: 'GET', async: false, contentType: 'application/json', dataType: 'jsonp',
        success: function (data) {
            getDevices(true);
        }
    });
}

Could you try latest beta?

[rldn]

I think graphs ont work with all types of sensors yet.
Whats the output of these devices from Domoticz?

Find it here:
http://YOURIP_AND_PORT/json.htm?type=devices

Spoiler: show

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Humidity 64 %",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 7,
"HardwareName" : "Xiaomi Gateway",
"HardwareType" : "Xiaomi Gateway",
"HardwareTypeVal" : 95,
"HaveTimeout" : false,
"Humidity" : 64,
"HumidityStatus" : "Wet",
"ID" : "2AFE",
"LastUpdate" : "2018-01-04 12:29:42",
"Name" : "Badkamer Vochtigheid",
"Notifications" : "false",
"PlanID" : "0",
"PlanIDs" : [ 0 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : "-",
"SubType" : "LaCrosse TX3",
"Timers" : "false",
"Type" : "Humidity",
"TypeImg" : "temperature",
"Unit" : 1,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "51"

For example

I just changed something.
Could you test latest beta???

Is it because a login for Domoticz is required?
This does not work also:
In de CONFIG.js kunnen je logingegevens staan als je gebruik maakt van "http://username:[email protected]"

I think so, entering username and password in the url is not supported anymore in newer version of some browsers.
You can switch to another login-method in Domoticz-settings, although, then you have to enter login at every load of Dashticz..

I have the same problem with the blinds switches not working (anymore).

The problem is in switches.js, function switchBlinds()
.block should be .block_

Code: Select all

function switchBlinds(idx, action) {
	switch (action.toLowerCase()) {
        case 'off':
            $('.block_' + idx).find('.icon').removeClass('on').addClass('off');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('open', 'closed'));
            break;
        case 'on':
            $('.block_' + idx).find('.icon').removeClass('off').addClass('on');
            $('.block_' + idx).find('.icon').attr('src', $('.block_' + idx).find('.icon').attr('src').replace('closed', 'open'));
            break;
    }

    if (typeof(req) !== 'undefined') req.abort();
    $.ajax({
        url: settings['domoticz_ip'] + '/json.htm?type=command&param=switchlight&idx=' + idx + '&switchcmd=' + action + '&level=0&passcode=&jsoncallback=?',
        type: 'GET', async: false, contentType: 'application/json', dataType: 'jsonp',
        success: function (data) {
            getDevices(true);
        }
    });
}

Could you try latest beta?

Thanks but can you tell me how i can update the system or get the latest beta without losing config?

[Moosjes]

I do have a few 'rolluiken' with a fibaro shutter unit. These blinds have a percentage bar in domoticz but in dashticz they show with an up/down/stop button. This does not seem to work (the stop does not stop it). Is there a way to give it a percentage bar in dashticz? Like dimmer lighting?

[htilburgs]

I don't know if it's a bug, but I've the next issue:

- Create a DummySwitch - Type On/Off Switch
- I can switch it from Dashticz

- Change Switch Icon from "Light/Switch (BULB)" to "Alarm"
- It cannot be longer switched from Dashticz (like protected = true)

[aiolos]

I do have a few 'rolluiken' with a fibaro shutter unit. These blinds have a percentage bar in domoticz but in dashticz they show with an up/down/stop button. This does not seem to work (the stop does not stop it). Is there a way to give it a percentage bar in dashticz? Like dimmer lighting?

Thanks for your message. Can you tell me what the relevant part of http://{domoticzIP}:8080/json.htm?type=devices for the blinds looks like? There should be a percentage bar if the blinds have that option.

I also see that the stop action does not work, but in Domoticz itself the stop button also does not work (and only shows up for 'Venetian blinds')

[aiolos]

I don't know if it's a bug, but I've the next issue:

- Create a DummySwitch - Type On/Off Switch
- I can switch it from Dashticz

- Change Switch Icon from "Light/Switch (BULB)" to "Alarm"
- It cannot be longer switched from Dashticz (like protected = true)

I cannot reproduce this issue (the switch is only disable if I set it to protected in domoticz).

[htilburgs]

I don't know if it's a bug, but I've the next issue:

- Create a DummySwitch - Type On/Off Switch
- I can switch it from Dashticz

- Change Switch Icon from "Light/Switch (BULB)" to "Alarm"
- It cannot be longer switched from Dashticz (like protected = true)

I cannot reproduce this issue (the switch is only disable if I set it to protected in domoticz).

Strange thing. I can select everything it still works as an on/off switch in Dashticz. Only when I select the Alarm icon, the on/off function in Dashticz is gone.

Icon type "Alarm"

Schermafbeelding 2018-01-12 om 20.20.07.png (44.42 KiB) Viewed 3820 times

Icon type "Switch or other than Alarm"

Schermafbeelding 2018-01-12 om 20.19.38.png (45.42 KiB) Viewed 3820 times

[plantex]

Hello.
Great Job - Thanks for Dashticz.

Bug fix request:
Blinds Percentage - common problem in current Domoticz release.
Created in default dashboard Blind percentage (via My sensors USB Gateway) slide doesnt work (not possible to move it) open / close are ok
The Light (used for the same node) - slide works ok I can set e.g.25% of blind level, but unfortunately buttons are not sending the proper msg (as blinds).
So the perfect combination would be to combine both widgets

bl.jpg (44.37 KiB) Viewed 3811 times

When both widgets are transferred to Dashticz:

a.jpg (16.76 KiB) Viewed 3811 times

It appears to be the same like on the pervious screen but not exactly:
Blinds: Up/Down buttons work ok , Stop (wasnt on default Domoticz dashboard) here appears and works ok. Slide(cannot move it to e.g.34% but as you press the buttons open/close it jumps from 0 to 100%)
Light (as described above) - no change

I'am not a coder hence my question: Is Dashticz just a layer or there is possibility of separate communication with e.g arduino node.
Just asking because - many people is waiting for Domoticz to be fixed with blinds percentage - Maybe Dashticz is our hope ....
Regards
Plantex

[aiolos]

I don't know if it's a bug, but I've the next issue:

- Create a DummySwitch - Type On/Off Switch
- I can switch it from Dashticz

- Change Switch Icon from "Light/Switch (BULB)" to "Alarm"
- It cannot be longer switched from Dashticz (like protected = true)

I cannot reproduce this issue (the switch is only disable if I set it to protected in domoticz).

Strange thing. I can select everything it still works as an on/off switch in Dashticz. Only when I select the Alarm icon, the on/off function in Dashticz is gone.

Icon type "Alarm"
Schermafbeelding 2018-01-12 om 20.20.07.png


Icon type "Switch or other than Alarm"
Schermafbeelding 2018-01-12 om 20.19.38.png

Do you have any custom javascript that can remove something? What if you have an almost empty CONFIG.js (only the bare minimum) and not custom css or js. (On my local machine I only see this behaviour if I make the switch protected)

[aiolos]

Hello.
Great Job - Thanks for Dashticz.

Bug fix request:
Blinds Percentage - common problem in current Domoticz release.
Created in default dashboard Blind percentage (via My sensors USB Gateway) slide doesnt work (not possible to move it) open / close are ok
The Light (used for the same node) - slide works ok I can set e.g.25% of blind level, but unfortunately buttons are not sending the proper msg (as blinds).
So the perfect combination would be to combine both widgets
bl.jpg
When both widgets are transferred to Dashticz:
a.jpg
It appears to be the same like on the pervious screen but not exactly:
Blinds: Up/Down buttons work ok , Stop (wasnt on default Domoticz dashboard) here appears and works ok. Slide(cannot move it to e.g.34% but as you press the buttons open/close it jumps from 0 to 100%)
Light (as described above) - no change

I'am not a coder hence my question: Is Dashticz just a layer or there is possibility of separate communication with e.g arduino node.
Just asking because - many people is waiting for Domoticz to be fixed with blinds percentage - Maybe Dashticz is our hope ....
Regards
Plantex

In fact Dashticz is just another layer as dashboard against domoticz backend. There are some extra things like the garbage, news and music player modules.
It is interesting to see what is exactly wrong with the blinds. Recently some small changes have been made because of some errors in displaying the blinds and I noticed that the whole stop command on domoticz is also not doing anything (the response of the API is an error), so I'm also wondering what kind of blinds you have where this works (so I can try that on my local machine too).
If there is something wrong in the domoticz backend, then dashticz cannot change that.

I will have a look at the percentage behaviour, but I don't have any blinds myself, so it is playing around with dummy switches.

[htilburgs]

Since the latest beta, my Neo Coolcam Door/Window Sensor don't work anymore in Dashticz. Something changed??

Code: Select all

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Closed",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 2,
         "HardwareName" : "Aeon Labs Z-Stick GEN5",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "00002200",
         "Image" : "Light",
         "InternalState" : "Closed",
         "IsSubDevice" : false,
         "LastUpdate" : "2018-01-26 13:50:04",
         "Level" : 0,
         "LevelInt" : 0,
         "MaxDimLevel" : 100,
         "Name" : "Sensor Voordeur",
         "Notifications" : "false",
         "PlanID" : "6",
         "PlanIDs" : [ 6 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Closed",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Switch",
         "SwitchType" : "Door Contact",
         "SwitchTypeVal" : 11,
         "Timers" : "false",
         "Type" : "Light/Switch",
         "TypeImg" : "door contact",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "748",
         "YOffset" : "125",
         "idx" : "553"
      },

[htilburgs]

Since the latest beta, my Neo Coolcam Door/Window Sensor don't work anymore in Dashticz. Something changed??

Code: Select all

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Closed",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 2,
         "HardwareName" : "Aeon Labs Z-Stick GEN5",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "00002200",
         "Image" : "Light",
         "InternalState" : "Closed",
         "IsSubDevice" : false,
         "LastUpdate" : "2018-01-26 13:50:04",
         "Level" : 0,
         "LevelInt" : 0,
         "MaxDimLevel" : 100,
         "Name" : "Sensor Voordeur",
         "Notifications" : "false",
         "PlanID" : "6",
         "PlanIDs" : [ 6 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Closed",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Switch",
         "SwitchType" : "Door Contact",
         "SwitchTypeVal" : 11,
         "Timers" : "false",
         "Type" : "Light/Switch",
         "TypeImg" : "door contact",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "748",
         "YOffset" : "125",
         "idx" : "553"
      },

Ok, I narrowed it down. When I use the [speakOn] options, the block is not functioning anymore. Can it be the same issue I had before, because I use IE11 on my Surface?
(I’m not able to use any other browser on that device)

[gerardosamara]

Hi ,

Dashticz Beta

The language options is present in custom_v2/CONFIG.DEFAULT.js but not in custom/CONFIG.DEFAULT.js

[DewGew]

Hi ,

Dashticz Beta

The language options is present in custom_v2/CONFIG.DEFAULT.js but not in custom/CONFIG.DEFAULT.js

Follow the wiki at http://www.domoticz.com/wiki/Dashticz_V2

[htilburgs]

Since the latest beta, my Neo Coolcam Door/Window Sensor don't work anymore in Dashticz. Something changed??

Code: Select all

{
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Closed",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 2,
         "HardwareName" : "Aeon Labs Z-Stick GEN5",
         "HardwareType" : "OpenZWave USB",
         "HardwareTypeVal" : 21,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "00002200",
         "Image" : "Light",
         "InternalState" : "Closed",
         "IsSubDevice" : false,
         "LastUpdate" : "2018-01-26 13:50:04",
         "Level" : 0,
         "LevelInt" : 0,
         "MaxDimLevel" : 100,
         "Name" : "Sensor Voordeur",
         "Notifications" : "false",
         "PlanID" : "6",
         "PlanIDs" : [ 6 ],
         "Protected" : false,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Closed",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Switch",
         "SwitchType" : "Door Contact",
         "SwitchTypeVal" : 11,
         "Timers" : "false",
         "Type" : "Light/Switch",
         "TypeImg" : "door contact",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "748",
         "YOffset" : "125",
         "idx" : "553"
      },

Ok, I narrowed it down. When I use the [speakOn] options, the block is not functioning anymore. Can it be the same issue I had before, because I use IE11 on my Surface?
(I’m not able to use any other browser on that device)

Nobody?

[clubeddie]

I'm using a P1 cable to monitor my smart meter but because i also have solar panels the energy usage is most of the time a minus number in domoticz dashboard it will show a negative value but in dashticz its always a positive number.

I have the same problem, is there a solution available?

Do you have solved the problem?