Xiaomi Smart Home Suite (very cheap) compatibilty?

[maramazza]

Hi to all,
is there a tag / card reader integrable in domoticz?
Thanks!!

[DAVIZINHO]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

[Mace]

I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

[tho071088]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... 68897.html

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

[chatainsim]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

[tho071088]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

Sorry, I did not pay attention, link edited

[fabiotodesco]

hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

XiaomiGateway: will listen on 9898 for hardware id 4
XiaomiGateway: Delaying worker startup...
XiaomiGateway: Worker started...

domoticz is install in windows 2012R2 server on my pc at office. The pc is connected in LAN (cabled). In to the pc if i ping the gtw it respond. I have test udp port with packet sender and the risult is attached.

Can you help me? i have reinstall the app to the my Android phone but nothing, nothing seems to work

[chatainsim]

Same question for me, using the dev version of Domoticz
They have a special price on Gearbest today : https://www.gearbest.com/home-smart-imp ... ?lkid=XXXX

Not found on this list : https://www.domoticz.com/wiki/Xiaomi_Ga ... le_Devices

Please remove your lkid from the link on this forum !

Sorry, I did not pay attention, link edited

Thanks

[timh1004]

I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

[tho071088]

I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Maybe with Mi Flora ? It does have a Lux sensor.
For outside I'm using weatherunderground API.

[timh1004]

I've got some troubles with the Gateway: Somehow, once every while, the 'Lux' stops functioning. As I have a script running that triggers lights based upon the Lux amount, this results in a diminishing WAF factor....
Anybody recognizes this?

Also searching for extra Lux sensors, but can't seem to find them (just the 'Klik-aan-Klik-uit' version)

I have exactly the same issue with the Lux sensor of the gateway! In theory, it works very well, but in my case, it stops working every night and is then offline for 12h or so.
The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Maybe with Mi Flora ? It does have a Lux sensor.
For outside I'm using weatherunderground API.

Great recommendations! Thank you!

[corbin]

hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

[Mace]

The second generation of the motion sensor (now also under the Aqara branding) has an build in Lux sensor, but this sensor is very inaccurate and therefore not usable.
So I‘m also searching for an accurate and reliable Lux sensor.

Do you have some more info/reviews on this? Seems to be the only viable option so far...

[corbin]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz

Yes it needs to be the dev/beta version. Are you getting an 'Unknown' message in the logs, if the device is not detecting, and isn't coming up as unknown it may not be supported in the firmware yet. I don't have one to test and just copied "sensor_wleak.aq1" as the device model from another project.

[fabiotodesco]

hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

HI, thanks for te answer but the firewalll of windows is disable, but i have a mikrotik firewall thath control the network. i don't understand this multicast story can you explain me?

Thanks a lot

[Luigi87]

hello.
the aqara water sensor is not availabe yet??
i have the v3.8153 stable of domoticz

Same question for me, using the dev version of Domoticz

Yes it needs to be the dev/beta version. Are you getting an 'Unknown' message in the logs, if the device is not detecting, and isn't coming up as unknown it may not be supported in the firmware yet. I don't have one to test and just copied "sensor_wleak.aq1" as the device model from another project.

Is there a way to add only file with support for the water sensor?
(i have done this before with .xml file for open z-wave, to get support on other devices)
I dont like to update my system to the Beta... ( i am now running the latest Stable)

[chatainsim]

hi, sorry if i have a old question, but i not can add gateway in domoticz...i have all port open but the reponse of domoticz is

To test this, you should be sending to the multicast address 224.0.0.50, not 192.168.134.250. I'm guessing you tried that first but changed to the actual device IP because the multicast address wasn't working, and if that is the case it is probably your Windows firewall blocking it, or your router/network configuration not working with multicast.

If I understand correctly, you send order to the gateway through multicast ?
That's why when I have my second gateway turned on I have errors messages telling my that the key isn't correct ?
The second gateway isn't configured in Domoticz.

Is there a way to not have anwser from the second gateway ?

[sdujolo]

I also have problem with lux sensor of the gateway. Before i was controlling lights with that sensor now it´s not working. The sensor in gateway is very good the one in 6in1 sensor from Aeotec is terrible. I don´t know if is becasue for new domoticz version or firmware in gateway. All other sensor is working.

[corbin]

If I understand correctly, you send order to the gateway through multicast ?

Commands are not sent multicast, they are sent direct to the IP of the gateway. Multiple gateways should make no difference to this, regardless of if the additional gateway is configured in Domoticz. The correct key should be returned by matching the IP address of the gateway you have configured in Domoticz, so don't know why you are having this problem.

[corbin]

HI, thanks for te answer but the firewalll of windows is disable, but i have a mikrotik firewall thath control the network. i don't understand this multicast story can you explain me?

Thanks a lot

Can't help you specifically with your hardware, but you can test on your windows pc by running wireshark and see if the UDP packets are visible on your network. Example of a UDP packet when clicking a Xiaomi button:

packets.JPG (138.39 KiB) Viewed 4132 times