Xiaomi Smart Home Suite (very cheap) compatibilty?

[arkoko]

Not (yet?) I hope and think @corbin will comment this.

[corbin]

Thank you @arkoko, i thought it will be added to Switches automatically. After manually adding it to Switches i can turn it off and on!
Is there a way to see power consumption too?

the plug should update automatically to the korrekt type when detekted, so a problem there.

no power consumption available, if/when it is, I will add to Domoticz

[deennoo]

Thank you @arkoko, i thought it will be added to Switches automatically. After manually adding it to Switches i can turn it off and on!
Is there a way to see power consumption too?

the plug should update automatically to the korrekt type when detekted, so a problem there.

no power consumption available, if/when it is, I will add to Domoticz

I think paszczus didn't know that we have to add device after detection to saw it on switch tab. Everything looks to work.

@paszczus can you confirm that plug status is update when switch from MiHome app ?

[paszczus]

Yes, the plug status is updating when i change if from Xiaomi Mi app and vice versa.

Zrzut ekranu 2017-01-15 o 14.24.21.png (220.22 KiB) Viewed 2277 times

It will be awesome if there will be power consumption status. I have ordered 3 more plugs

[deennoo]

Can you share with us plug message (text on log tab) ?

[StasDemydiuk]

I found this repository with some documentation for Xiaomi devices:
https://github.com/louisZL/lumi-gateway-local-api

It looks like plug power consumption can be taken:
https://github.com/louisZL/lumi-gateway ... er/plug.md

[corbin]

power consumption is not reported

from the docs - https://github.com/louisZL/lumi-gateway ... i/issues/5

[paszczus]

Can you share with us plug message (text on log tab) ?

Do you mean this?

Zrzut ekranu 2017-01-15 o 20.23.26.png (331.02 KiB) Viewed 2224 times

[deennoo]

No this :

But with plug message...Corbin just confirme that message doesn't looks to be provied.

[paszczus]

Ahh, right:

2017-01-15 13:22:59.726 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:22:59.791 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:22:59.794 {"cmd":"report","model":"plug","sid":"158d000110470d","short_id":42409,"data":"{\"status\":\"on\"}"}
2017-01-15 13:22:59.814 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:22:59.816 {"cmd":"report","model":"plug","sid":"158d000110470d","short_id":42409,"data":"{\"status\":\"on\"}"}
2017-01-15 13:22:59.822 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:22:59.824 {"cmd":"report","model":"plug","sid":"158d000110470d","short_id":42409,"data":"{\"status\":\"on\"}"}
2017-01-15 13:23:01.924 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:23:01.926 {"cmd":"report","model":"plug","sid":"158d000110470d","short_id":42409,"data":"{\"status\":\"on\"}"}
2017-01-15 13:23:01.945 (Xiaomi Gateway) Light/Switch (Xiaomi Smart Plug)
2017-01-15 13:23:01.947 {"cmd":"report","model":"plug","sid":"158d000110470d","short_id":42409,"data":"{\"status\":\"on\"}"}

[deennoo]

Cmd bla bla bla is the message send by the gateway, domoticz "just" hear it and translate to his language.

As you can read their no power information, did you get it on MiHome app ?

[paszczus]

Yes, it works pretty nice:

xiaomiplug1.jpg (81.52 KiB) Viewed 2221 times

xiaomiplug2.jpg (60.71 KiB) Viewed 2221 times

[deennoo]

Ok cool, just have to be aware of a futur fw update !

[Mat2Vence]

One quick question regarding the door sensor. There is a behaviour I am not understanding. In domoticz, it looks like when the door is open, it is considered as closed in the status 1 minute after it has been open, whatever the case. I the mean time, if I am looking at the status on the xiaomi app, it is still open.
Any chance to know where it can come from?
I am using those sensor to know whether my velux are open or not... so that a bit painful to see there are closed when they are not
If you have any idea on where to investigate?? thnaks a lot!

[Mat2Vence]

I have just uploaded the last beta version and it seems it has been fixed. I now have the same status on both Domoticz and xiaomi app.

[murtadin]

you can try compile from source for the start.

I tried "emerge -v git", and it didn't work:

First check /usr/bin/emerge if file exists. Check permitions. You are trying it under root user? If not -
looks like you have to install stage 3. Just download it and unzip to the system root.

I have installed missing liveusb library, required by precompiled binaries - now i can start ./domoticz, but still no luck. No device appear in device menu. Still need help to debug this case.

[arkoko]

In domoticz, it looks like when the door is open, it is considered as closed in the status 1 minute after it has been open, whatever the case.

Yes, it is (beta v3.6367). Domoticz "close the door" on this signal:

Code: Select all

{"cmd":"report","model":"magnet","sid":"158d00011854aa","short_id":1082,"data":"{\"no_close\":\"60\"}"}

This behavior appeared after last firmware upgrade on the gateway.

[deennoo]

In domoticz, it looks like when the door is open, it is considered as closed in the status 1 minute after it has been open, whatever the case.

Yes, it is (beta v3.6367). Domoticz "close the door" on this signal:

Code: Select all

{"cmd":"report","model":"magnet","sid":"158d00011854aa","short_id":1082,"data":"{\"no_close\":\"60\"}"}

This behavior appeared after last firmware upgrade on the gateway.

Be patient solution is here, corbin is working hard on it, just give him time to provid a full release with all devices aviable

[corbin]

First check /usr/bin/emerge if file exists. Check permitions. You are trying it under root user? If not -
looks like you have to install stage 3. Just download it and unzip to the system root.

I have installed missing liveusb library, required by precompiled binaries - now i can start ./domoticz, but still no luck. No device appear in device menu. Still need help to debug this case.

How about you create a VM of your setup that I can test with?

[corbin]

Be patient solution is here, corbin is working hard on it, just give him time to provid a full release with all devices aviable

This is already fixed after the last firmware update. Gateway LED control and Aqara switch support will be coming next. I got delayed on the weekend when friends turned up.