HI all! Merry X-mas :-) I am struggling with Lua and I hope that somebody can help me. I have Curtains which are controlled by Zwave (Zwave Fibaro Roller Shutter 2) and added in Domoticz as a Curtain (without Level). I would like to create a Dummy switch (Push On button) which when enabled opens the ...

Same interest here! Would be great.

I have the same problem! On works well, but I cannot turn it off

Thanks both!

Hi all! I have a challenge with my garage door. Because my RFlink does not support the protected remote of the garage door, I am looking for a solution in Zwave to open up my garage door. The garage door opener has the possibility to add a switch. As soon as the Switch (pulse) is connected (it ...

Hi all! I am working to get my garagedoor workin with RFlink. When I press the remote, I see the following code in debugger: *Mailed to Frank* In Domoticz it was recognized the first time, but sends a "DIM" signal, and "BRIGHT" afterwards it just didn't work. Is there any chance that this device can ...

Thanks man Finally I am able to control the blinds !

10;RTS;0100F2;0;DOWN;
10;RTS;0100F2;0;UP;
10;RTS;0100F2;0;STOP;

All work!

Now I am going to check how to get them to work with Domoticz

Thanks again!!

@stuntteam, It would be great if you can solve this in some way I think many people will be happy

Unfortunately I have exactly the same issue as piokuc.

Using firmware 42

Great! Thank you Stuntteam

I tried DJgodlikes method. That works. I can pair it using:

10;RTS;[UNIQUECODE];1;PAIR;

The Somfy motor confirms that it has been programmed in the right way. But then the "UP/DOWN" etc do not work. But now I am convinced that it should be able to work with RFlink

Hi all, thanks for the suggestions.

Unfortunately I do not get it to work

Anyone other suggestions? Otherwise maybe it woudl be best to buy a RFXTRX433E, but that would be a pity because I am very happy with the RFlink. Works on almost everything.

Good morning! I have a Telis4 Remote to control my Somfy Roller shutter. The RFlink recognizes the signals, see Debug log below. When I press the button "Learn Switch" Domoticz learns the Signal. Then When I press Up or Down on the switch in Domoticz....... nothing happens :) So it seems The RFlink ...

Hi all! Can anyone confirm that Somfy Telis1 remote works with RFLink? Then I will buy one. My centralis does not work with RFlink (no response). But my RTS Oximo motors are also able to 'talk' with Telis.

Thanks!

Of course! I am sorry for the delay, I didn't read the topic anymore.

These are the ones:
http://nl.aliexpress.com/item/Free-ship ... 28749.html

I cannot make a picture because it is mounted high in my shed

nobody ?

Updated to latest Beta. No change :(. What I did try is to attach the rflink to a pc and enabled serial port logging and debugging. The RFlink does not report any activity when the Somfy Centralis Remote buttons are pressed. I checked the manuafacturers page and it should be 433Mhz (from the dutch ...

Hmm... Maybe this can be the issue:

http://www.domoticz.com/forum/viewtopic.php?t=10331

Good afternoon! I have a RFlink with latest firmware, Raspberry and Domoticz. I have two roller shutters, which use a Centralis RTS remote to be controlled. I would like to control the roller shutters also from Domoticz. I tried to "automaticly learn" the Centralis RTS signals, but that didn;t do ...

Thank you Mischa! Very clear explaination. It works ! (I made a dummy switch for sunset/sunrise, so I can check that also)

Also Thanks to Stuntteam ! I will check the debug log and send it later this week.