@migwelly I have an iskra am550, provided by Stedin. Yes, it will work. You need to do some modification. You need to solder a 10K resistor (Pull-up resistor ) between 5 V and RXD You also need to invert the signals of the FTDI chip. You need to use FT-Prog for that. If you need help with that ...

@migwelly I have an iskra am550, provided by Stedin. Yes, it will work. You need to do some modification. You need to solder a 10K resistor (Pull-up resistor ) between 5 V and RXD You also need to invert the signals of the FTDI chip. You need to use FT-Prog for that. If you need help with that ...

Dirk wrote:Ah, OK. Well 'might work' is not good enough for me I'm afraid. Since I'm a newby and have the time nor experience to do modifications myself, I think I'll either wait for a recommendation of somebody that has tried or just spend the 20 euro's. Thanks a lot for you response!

Which meter do you have?

I want to have Domoticz make a readout of my Smart Meter (Dutch, Stedin). On Dutch shops I find cables starting from 20 euro's. On AliExpress I found this cable for 6 euros (including shipping): https://nl.aliexpress.com/item/ftdi-ft232r-usb-ttl-5v-to-rj11-6p6c-for-dutch-smart-meter-dsmr-p1 ...

Yes, the Aeon Labs Aeotec Gen 5 Z-Wave plus USB adapter is good. I am also using this controller on a Raspberry pi 2 with Domoticz and it works fine!
Installation is also easy. Support Z-Wave and Z-Wave plus devices.

What model of Neo coolcam PIR sensor you have?

Verstuurd vanaf mijn SM-G935F met Tapatalk

My Neo Cool Cam motion sensor also arrived, and it's also working good.
Quality looks and feels good

Verstuurd vanaf mijn SM-G935F met Tapatalk

bram82 wrote:But do you encounter any problems when using kaku modules to switch these valves?

Sometimes, but realy sometimes.
Mist of the times they work flawlessly.


Verstuurd vanaf mijn SM-G935F met Tapatalk

I use these.
Probably expensive, but they always work.
You can connect them to 230 V directly.

Try to make you're blocky script like this :

If time is > then sunset and doorsensor = open
Set staircase lights = on for 1 minute

Else if

If time is > then sunrise and doorsensor = open
Set staircase lights = off



Verstuurd vanaf mijn SM-G935F met Tapatalk

Hi,

The same here.
I can turn on the fibaro wall plug threu Domoticz, but not able to turn it off. Problem with sending code.
When I restart my Raspberry.
Everything works.
But then again I cam only turn the plug on not of.




Verstuurd vanaf mijn SM-G935F met Tapatalk

Hi,

It would be great if you guys can share you're Tasker projects.
I think that many people will be helped.

Regards,

Migwelly

Just bought the premium.
Thanks guys the app looks amazing.
Nice Integration with the Hue lamps.
Awsome.
Yeahhhhhhhh

Hi Hesmink,

If you use the Select Plus wireless doorbell from the action you could simply make a small circuit so that you can use you're old doorbell.
And also receiving a notification on you're phone.

You only need:
1 relais
1 ( bruggelijkrichter)

Try to Google it.

Regards

Migwelly

Hi All,

Could somebody please tell me what's is the best motion sensor in combination with Domoticz?
No i use the Kaku motion sensor, but sometimes the sensor does not report motion.
And that is frustrating me.

Any one some tips?

Would be nice.

Regards,

Migwelly

Thanks Bernd for you're reply.
Yes, indeed it is a repeater.
I used the wrong word.

I will buy 1 of those repeaters, because it is needed in my house.

Regards,

Migwelly

But do you think the signal Amplifier will work with the RFXCOM-E?
Please let me know.
My signal is weak and sometimes does not reaches every switch.

Hi, I just want to let you guys know that today there is 20% discount on Kaku Items. For example. AMST-606 official price praxis : €14,99 After 20% discount €11,99 It's not a lot, but I just want to inform you guys about it. BTW. Does somebody know it kaku AEX-701( 433 mhz wireless Amplifier) will wo ...