I decided to switch to indeed a Sonoff USB stick and also Zigbee2MQTT. I have too much trouble keeping the plugin alive on my windows server running Domoticz. It is not possible at all anymore to run the plugin somehow, and the Zigate devices seem to have lost connection to all devices. Which means ...

Hi Pipiche, is that firmware any better now? I still see many issues on the Github!

Hi all, I am running Domoticz with ZiGate, using the ZiGate+ (v2) USB dongle. I tried various times to upgrade the firmware to version 3A0, but it keeps loosing the connection with most of the devices, when I do so. Luckily, when downgrading again to version 322 it finds them again. The only error ...

Me too, firmware ZiGatev2-3A0.bin is not a good firmware, I loose several devices being unreachable. Back at 322 all is OK.

Tried to manually uninstall and then install that module (pip uninstall module and then pip install -r requirements.txt --upgrade), and now module z4d_certified_devices seems ok. Now it starts to have trouble finding modules distro and zigpy_cli. Applied the same trick, manually uninstalling and ...

Thanks for the reply, Pipiche. I did! I used a Powershell Admin - console.
I also tried to install that module manually, following https://github.com/zigbeefordomoticz/z4 ... ed-devices.
It installs successfully, but is not recognised by the plugin.

I try to upgrade the ZiGate plugin to version 7 on my windows 10pro machine. The upgrade seems to work well following the steps in https://zigbeefordomoticz.github.io/wiki/en-eng/Release_7.1.html. When I restart Domoticz, the plugin does not start, it cannot find a module z4d_certified_devices. This ...

Hi, Thanks for your reply. I did do the for .. in pairs routine, and the device does not appear there. I think the cause may be in this sentence: Check also that changes to virtual device are not done silently (which are not triggering change events). In what situation do I do a change silently ...

Hi, I have a question about the virtual devices, and how to script in Lua a response to a value change of the virtual device. My problem is this. I have the following 2 devices: P1GW AC and P1GW Power. The first one is a virtual device, the other a preset type in Domoticz (P1 Smart Meter). Both ...

I currently use the Zigate 2.0 zigbee coordinator. I notice that many people mention the Sonoff ZigBee 3.0 USB Dongle Plus (CC2652P). Is that coordinator better that the Zigate 2? And do I need to re-connect all devices to the Sonoff if I switch? I expect a much better coverage and signal strenght ...

I downgraded to 322 and now it works indeed! Thanks, 3ao is bad indeed.

Hi, have a ZiGate+ and a number of clients. Domoticz is running on Win10, ZiGate+ connected via USB. I noticed not all of the clients were working anymore. So I updated the plugin to 6.3.012 and the ZiGate firmware to 03a0. Also, I cleared the WiFi from channel 11 (the coordinator is on channel 25 ...

Thanks!

Has anyone tested if the 2022.1 Domoticz release works well with the latest version of the Zigate plugin?

Hi all, With my new ZiGate running on a Windows 10 machine I tried to pair with a TRADFRI Remote. That was succesfull, see attached images. It was recegnised in the Plugin, and it appears as a Domoticz device. However, after that, I can push buttons what I want, nothing is happening. The device is ...

Yep, that does the job. It is now recognised as Motion detector. Thanks again!

Hi all, I have a Zigbee 3.0 motion sensor from Aliexpress (https://nl.aliexpress.com/item/1005002419717912.html). My ZiGate+ does receive signals and also creates device in the plugin (see image, bottom item). But there is no device successfully added in Domoticz. I do see a number of attempts but ...

I am happy to share with you that this device does pair with my ZiGate+ (v2). To be able to do that, I 1. connected a load to it (lamp), and an actual rocker 2. connected it to 230v AC 3. kept the hardware button pushed for a long time. First it responds with 2 short beeps, then after a while (keep ...

@Pipiche, I reset and pair it with the hardware key on the device. But I do not have any load or switch connected to it. I will add that tonight to see if that changes the behaviour, thanks!

@Waltervl Hmm, I dont want it to have RF, will check you link as well.Thanks.

DJ

Hi all,

I have a Tuya Zigbee 3.0 Switch Module MS-104Z. I try pairing with the ZiGate+ controller (Zigbee 3.0), but see no response at all. Is such module not supported, or is my setup still not working?

This is the device:
https://nl.aliexpress.com/item/4001062425255.html

Thanks.
DJ