USB adapters for 5 GHz are accepted by the Raspberry PI OS, for all models. Check ARM V7 Linux support

Do not forget other parts of your system. E.g. if you use MQTT that should also be installed. Plugins to consider. So make a list of what you use now and how it supported with the newer version (e.g. Autodiscovery MQTT versus the zigbee2mqtt plugin). Also RPi hardware upgrade? Think about SSD boot ...

eMMC via USB is an option for a Raspberry Pi that seems to work as boot and data device on the Pi 4.

Is it worth the price? I went the SSD way with many Pi 4's now and that operates fast and reliable.

I have no experience with the CM4 with eMMC variant of the Raspberry Pi.

It is Domoticz which lets us down with this switch.

It seems to wrok fine in Home Assistent and with the Lidl gateway software.

Hans

Sounds familiar to my experience with the Lidl Smart Switch. Same Zigbee2MTT setup. Behaviour is the same, not of any use in Domoticz as is. See https://www.domoticz.com/forum/viewtopic.php?p=294880#p294880 It seems you need to write scripts for it. See https://www.domoticz.com/wiki/Dummy_for ...

I have a LIDL Smart Switch, type Lidl HG08164 Shows up fine after pairing in ZIGBEE2MQTT. In zigbee2MQTT I can see using the button, action "on" = single click, action "off" = double click. That looks fine, it reports this OK. In Domoticz with zigbee2mqtt plugin the device appears as Silvercrest ...

get a cheap email only service. 1 to 2 euro, your own email address

'free' is not always free and google ...

Running without hickups on a Raspberry Pi 4, with USB 3.0 to SSD controller (ASmedia type) and a small SSD, official power supply, Buster OS. Zigbee USB stick, P1 meter USB, rflink Arduino, ethernet and Wifi. Well ventilated case (3d printed), placed in 'meterkast', never seen overheating/throttling ...

Refresh and clean cache usually helps.

Setup - Settings - middle right column -Check for software updates

And Apply settings

You will need just released Domoticz 2022.1 for the latest zigbee2mqtt plugin, see the github issues. Or fallback to an older version of the plugin if you do not want to upgrade Domoticz. To avoid the errors you have now, stop Domoticz, remove the whole plugin folder, do a fresh plugin installation ...

Zijn dat Nefit CV ketel sensors?

Hoe heb je dat gekoppeld? wellicht dat daar iets niet werkt.

Good question!

I would love also to replace the web based currrent plugin with a (more reliable and no external dependent, SEMS portal is sometimes slow) with a local one.

Hans

The TI CC2531 USB stick is working fine in Zigbee2MQTT for many . Not the best solution nowadays it seems (range, limitations) but cheap, and if it works it works. What is Raspbian 10 ? On Raspberry Pi OS, use Buster Lite, that is the name and version that works fine with Domotzicz. Did you perform ...

On what hardware? Since you talk about Raspberry Pi Imager may I assume a Raspberry. It works fine on Raspberry PI OS Buster Lite (long term support version now) with the Electrolama zig-a-zig-ah! (zzh!) CC2652R stick . I have also good results with (non-zigbee) FTDI based RS232 dongles on Raspberry ...

In case you did not know the official Raspberry Pi USB-C charger is 3A, and they all come from China. And it works fine with a Raspnberry Pi 4 with SSD and some USB devices. Besides the Domoticz system I have an OpenVaultMedia NAS with a 2TB WD SSD and the Raspberry Pi powersupply, no problems at ...

Not true, most RPi's and small SSD's run fine without external power supply and are very fast and reliable. And other USB devices? I have two more, the zigbee stick and a RFlink. Do not over engineer! See what power is needed for an SSD, just to get an idea: https://www.anandtech.com/show/8747 ...

RobertM wrote: ↑Wednesday 15 December 2021 21:25 RPi SD Card Copier

https://linuxhint.com/how-to-clone-a-ra ... i-sd-card/

Good advice!

don't need external power supply Yep but still need one, by the USB port, so more consumption, and less for other USB devices. Not true, most RPi's and small SSD's run fine without external power supply and are very fast and reliable. And other USB devices? I have two more, the zigbee stick and a ...

SSD 240 GB 20 euro and a Raspbery Pi 4 and printed my own case. Cheap SSD my WDC_WDS250G2B0A costed around € 40,-- per pce Can your case be found on Thingiverse? A small SSD like 120GB is more than enough, you are only replacing a 16 GB SD. And they are about 20 euro now. Yea, there are many cases o ...