@hesselb Already done that, Will check later today with a fresh start. EDIT: Just started over with a clean directory: Stil no luck. It keeps connection/disconnecting to MQTT and a few seconds later it trows the following error: pi@VentilationPi:~/StorkAir-Zehnder-WHR-930-Domoticz-MQTT$ sudo python3 ...

Anyone else stumble on this Connection refused error message when running python3 /usr/local/bin/whr930.py After manual installation (makefile didn't recognize the commands in the file) i continuously am stuck at the following error: [code************************ * WHR930 MQTT Domoticz ...

[...] Hey Jeff, Do you still have this issue with your V200+PR6P? I was considering this solution. but not if I might get those errors. Thanks! Haven't been active for a while... Currently rebuilding domoticz from scratch since it got corrupted. Expect to have a answer to this in the next few hours ...

found the issue for some reason svalue=On does not work change the script to nvalue=1 works! Just to clarify your answer; Changing the value from $status = "1&svalue=On"; and $status = "0&svalue=Off"; To: $status = "On&svalue=1"; and $status = "Off&svalue=0"; Should be the solution to update it ...

I also got this watermeter. I can't figure out which sensor is used for this. Anyone who can tell me? https://tweakers.net/ext/f/Hdj5JoCvBh0G1vfi3ZRtu3Ss/full.jpg Did you manage to read your watermeter? I have the same watermeter and want to try to get it in Domoticz. Looks like a RF version of the ...

Hi All, I have my P1 smart meter running for a couple of years now. All seems in working order. But.. Now that I have solar panels I was expecting to see information about return of energy. I do see the totals of kW being returned but I do not see a current (Actual ) return. it is always 0 Does ...

Is there a way that the switch status get updated automatically? For example if the user switched on the box with the provided remote the switch in domoticz shows by default "Off" and so in when putting it into standby. i've been seaching the forum but haven't found a solution for this to have ...

Anyone ? I've had a new gas+electricity meter installed (landys+gyr E350 DSMR 5) and hade to make a new cable for it, While doing the initial testing with the 115200 7N1 parameters and inverted RXD i noticed that the data is not being displayed properly with this cable. The board is correctly ...

I've had a new gas+electricity meter installed (landys+gyr E350 DSMR 5) and hade to make a new cable for it, While doing the initial testing with the 115200 7N1 parameters and inverted RXD i noticed that the data is not being displayed properly with this cable. The board is correctly soldered since ...

I tried to find the port/ip with the nmap command, my gw 192.168.1.254, but 255 cannot be the address to scan i suppose ? an other used address by the horizon is 192.168.1.100 but also i get no reaction on that address nor 101. If the default gateway of your horizon is 192.168.1.254 i assume that ...

Why don't you take it the easy way? Since the pictured meter is a itron Aquadis+ you can achieve the same with less editing in files etc. by buying a so called Cyble sensor . This sensor just snaps in place on top of the meter and can be connected to a piface input for monitoring the water ...

Does anyone else notices strange temperature drops while the ventclient.sh script is running? Temperatures are regularly dropping to as low as -16 or as high as 101 degrees celcius ?!?. i've noticed that when checking the temps on the whr itself all the value's are normal. http://www.dumpt.com/img ...

Hi, Maybe I am going to ask some stupid questions/observations so please bear with me. 1) My WHR 930 has a RS232 interface, does that mean that a Domoticz controller has a RS485, otherwise this conversion is obsolete. or are you running Domoticz on a platform with a RS485 interface? 2) I run a ...

sincze wrote:I'm very happy with the possibilities of Influx and Grafana.

General overview

Grafana.JPG

Monitor the CV

Grafana-OTGW.JPG

Monitoring Ziggo

Grafana-Ziggo.JPG

Just out of curiosity, How did you manage to implement the Ziggo speedtest into grafana ?

For those who want to discover what ports the horizon mediabox is using consider using nMap. This network scan tool comes both command version and a standard installer. In a normal situation where the box is connected to your home network the built-in DHCP of the mediabox reserves a block of 20 ip's ...

Hi, Got it partly working for my WHR 930, The only part that doesn't work is the part where the commands in the scripts are being sent to the WHR. The scripts are successfully executed by domoticz but at some point the whr unit doesn't recognize/understand the commands as it won't change the fan ...

Hi All! For the past few days i'm experimenting with my own version of the frontpage (based on the attachment back on page 4), Now after a few days of trial and error ;) it's looking good. I actually making 2 versions of it, a non-responsive design and with responsive design, While creating the non ...

It seems that after switching to a 2k resistor the data gets pushed into domoticz ,Problem solved.

Well replacing actually didn't work for me, Once again the meter gets recognised by domoticz it only doesn't log data. Testing it directly without domoticz in a terminal such as putty on windows gives a proper 10 sec telegram, Testing it on rpi with minicom on 115200 7N1 gives gibberish output ...

If we are still talking about the E350 Smartmeter what works for me is the settings below, i'm using the E350 v 4.4 Baudrate: 115200 Databits: 7 instead of the normal 8 Stopbits: 1 Parity: none FlowControl: none The above settings where tested with the FTDI TTL-232R-5V and a 1Kohm resistor between ...