Had the exact same problem! Thnx for sharing this!

Is this script still working?
How do I add the timer device?

Hi, Does not work for firmware version 1041: https://www.amazon.co.uk/Bresser-433MHz-Thermo-weather-stations/dp/B0076JGK7U/ Does work with firmware version 1041: https://www.amazon.de/gp/product/B07CQF4712/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 Probably first link will work with newer ...

I ordered them. Will let you know if they work.

Off course. You can simply use the delay functionality.

In Lua you can request current time. As soon as the door opens you can store this time. Maybe you can use a while loop that constantly checks current time. As soon as 30s are passend, you want to go out of the loop and re evaluate if the door is still open.

Here is a way to reset your USB connected devices using a cronjob. This can be usefull if you have problems with your usb devices (they can become unresponsive after some time). Rebooting the whole devices takes much more time than using this script. With this script it resets 'instantly'. You can ...

Hi, I'm currently using this power adaptor: https://www.amazon.de/-/en/gp/product/B00WLI5E3M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 this cables: https://www.amazon.de/-/en/gp/product/B07QWSLFV7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and this hub: https://www.amazon.de/-/en/gp ...

Hi all, I'm using a netatmo weather station to monitor the temperature. When the temperature is below a certain threshold, the switches should go to 'on'. When the temperature is above a threshold, the switches should go 'off'. So I created this code. The state of the netatmo station is something ...

Ok. I think I see the problem. The sensor is not yust giving a value, but rather a string like this 20.5;70;3;1019.7;7

I think I will have to do this with Lua...

b_weijenberg wrote: ↑Saturday 28 September 2019 11:33 Connect the RFXtrx433XL on a Windows system, use the same USB cable and check if the RFXtrx433XL keeps operating.

This seems to work. I will try a powered USB hub.

Also, if I make something like this, it does not work.

Hi all,

I configured my blockly script and I think it should switch my switch ('zithoek') to 'on'. However, nothing is hapening. Am I doing something wrong?

Tried different power supplies, nothing worked. Also, when the transciever works, I see lights flashing when I switch. When it's not working, domoticz still says 'switching', but the lights do not flash on the RFXCOM.

Problem stays the same. Now 90dB noise, still after some minutes the switches do not turn on or off. When i disable the antenna in the hardware section en re-enable it, it doesn't show any number for the noise, so it seems that on that moment there is no connection between the raspberry pi and the ...

b_weijenberg wrote: ↑Saturday 28 September 2019 9:43 - Do not flash the RFXtrx433XL using Domoticz!!!

What do you mean with 'flash'? You mean updating firmware?

Hi, I configured the transciever to work with 'klikaanklikuit' switches. This is working fine when I boot up the raspberry pi. After approximatly 10 minutes, I cannot control the switches anymore with domoticz. It is yust not reacting anymore (the virtual switch in the software is switching, the ...