Good morning, I've noticed that the temperature setpoint function does not work (anymore) on Domoticz and Pilot app. They display but I cant change an temperature setting. The domotics version is (currently) 2024.1 (build 15797), but setting the setpoints has not worked for some time. It is working ...

I have the same problem after updating. Also on ios domoticz and Pilot app

mistysnip wrote:Hi,

I swapped to a Anna thermostat and I'm trying to add it to Domoticz, but I can't find which user/password to use?
Currently, both the app and the web versions work fine.

Thanks

The username is: smile
The password is the ID of your Anna


Verzonden vanaf mijn iPhone met Tapatalk

Yes, only for the Zwave devices indeed. Rounding the decimals sounds like the best solution to me indeed.. Maybe possible to check how the Openzwave plugin handles it? I don't know how to check this. Thanks a lot for your replies! As my last post states: It should be fixed in the latest Beta, so ...

I would like to replace all devices created by the Zigbee2mqtt plugin with the devices created by the MQTT auto discovery plugin. Because the old plugin with max 250 devices is flooding my logs: 2022-02-24 16:24:24.744 Error: Expected: myVar = Domoticz.Device(Name="myDevice", Unit=0, TypeName ...

Yes, only for the Zwave devices indeed. Rounding the decimals sounds like the best solution to me indeed.. Maybe possible to check how the Openzwave plugin handles it? I don't know how to check this. Thanks a lot for your replies! As my last post states: It should be fixed in the latest Beta, so ...

@dheuts, is this only happening for ZWAVE devices right? The thing is that we have the convert a 100 scale to a 99 scale for ZWAVE as 100 means to switch the bulb ON and set it to its last used Level. so that means that 100 becomes 99 and presumably 1 becomes 0 because we drop the decimals of the 0 ...

I have bought another Zwave USB stick and set all the devices up in Zwavejs2mqtt and replaced all devices in Domoticz and the delay is gone. Good news! But since I have set it up via Zwavejs2mqtt instead of the open zwave plugin, I have a strange problem in Domoticz. If I set the zwave Fibaro ...

So that means to me the delay comes from within your zwave network. Maybe a faulty unit is causing this? That's what I think also indeed. But the PIR in this example is connected directly to the controller and 5x Fibaro Dimmer 2 devices. So because it's also direclty connected to the controller, I ...

jvdz wrote: ↑Sunday 06 February 2022 13:27 Did you check the mqtt message received at that time and do they show the same delay?

Thanks for your reply!
Yes, indeed I see 4 seconds delay also over there, please check below:

Good afternoon all, Since some days after working for years I noticed delay of 3-7 seconds on battery operated Zwave PIR sensors and Zwave Door/Window contact not registering all updates. I noticed in the OZW logfile the command came in on the right time, but only 5 seconds later I was able to see ...

I'm having the same problem. Since a couple of days, some battery powered Zwave nodes are responding very slow. It takes up to 7 seconds before the action is visible in Domoticz. With the same errors: ERROR: Dropping command, expected response not received after 1 attempt(s). Command: "SwitchAllCmd ...

Nobody any idea how to get this working?
If it's not possible with Blockly, would it be possible with another kind of script?

I have a Chuango G5 alarm system. It's the same as Etiger, Eminent EM8610, Konig SAS-ALARM300 etc. Also 433MHz and with RFXCom, I am able to get the status of the alarm base. It will show disarmed/armed/armed home. I use this script to switch the built-in DOmoticz alarm statuses: commandArray ...

Good afternoon, I made a script to put a message in a text sensor from P2000. If the text sensor gets updated with new text, I would like to receive a notification with the content/value of the text sensor on my phone. Test.png When I do this with Blockly and put the text sensor in the message block ...

Thanks a lot!
We had to start the washing machine and wait till it finished.
It just did, so I have sent you the DM with the script and the screenshots. Thanks in advance Felix.

Thanks for your reply Felix, I already have set the USAGE_TimOut of the washing machine to 15 minutes, and as far as I can see the dips are only 5-10 minutes. But it still shuts the virtual device to off, it seems it doesn't do anything with the TimeOut time I set up. As I wrote in my post of 13 ...

Hi Felix, Even with the reporting interval on 600 seconds, the virtual switch keeps switching off 2 or 3 times when still washing. Any ideas how to fix this? I think I see the problem, the script is running every couple of seconds instead of only every 5 minutes. How to get this fixed so it only ...

Gerwin wrote: ↑Tuesday 11 May 2021 7:05 Hello,
the version i have is 0.4.11 is this the last one on this moment

Gerwin

Yes it is, please check: https://github.com/999LV/SmartVirtualTh ... istory.txt

Yes, there are wind sensors in the Buienradar or Open Weather plugin. You can make a script like for example:
If Wind > 10 m/s -> Rollers/Blinds down