Perhaps try to install libssl1.1 first and then install Domoticz. This has been changed recently in the install script as newer systems use libssl3. Domoticz needs still the old libssl1.1. sudo apt-get install libssl1.1 You are a legend! The command you provided did not work out but I found ...

Hello community, I have been trying to use a Zigbee Button to trigger different things. In this example, I am trying to switch an air dehumidifier on using that button. Currently, I am either switching the air dehumidifier on using my phone or using the phsycal button on the Shelly Plug S actor ...

I am facing the same issue and I am wondering who can help to resolve this issue.

The error message is generic: "Error sending switch command, check device/hardware (idx=xxxxx)"

Yes, I removed Danalog from both Zigbee and Domoticz and re-registered everything. The only light improvement is that locked and unlocked state works. Maybe I can find a way to send a http command to Zigbee2MQTT Web If as a workaround and use a button in Domoticz.

So, the update to 2023.1 did NOT do the trick. So as a workaround I will switch remotely using the Zigbee2MQTT Web If.

Thank you very much for your reply. I will upgrade Domoticz, but I am quite reserved about upgrades because sometimes depencendies like the underlying OS or for example also Zigbee2MQTT can cause problems. I usually upgrade everything and make backups and images before. I was hoping that somebody ...

Hello community, I've been running Zigbee2MQTT with Domoticz version 2022.2 and would like to control my newly installed Danalock v3. Danalock has successfully been detected by Zigbee2MQTT. I can also perform lock/unlock operations through the Zigbee2MQTT web interface and also status locked ...

Hi Since few versions you cannot retrieve the password. But if it works well in your current domoticz configuration you can retrieve the password. Here a short video: https://www.youtube.com/watch?v=vRxt7bPcMQE Hope it helps. Do not need that anymore but trick is nice. So the PW is just masked by ...

Hello, Hello, ########## I know that this topic was raised in https://www.domoticz.com/forum/viewtopic.php?p=296694#p296694 already, but I am expecting the below to work since the creator of the Shelly MQTT Phyton plugin says that MQTT Auto Discovery will work. ########## I’ve been using Shelly d ...

Thank you everyone for your help. I managed to migrate all sensors from Mi Gate to Zigbee2MQTT running with SONOFF ZigBee 3.0 USB Stick. I tried ConBee which was not accepted by Zigbee2MQTT even though I followed the instructions on Zigbee website. The SONOFF Stick with external antenna is just ...

Hi! The "Shelly4 Pro (relay)" is listed as supported device. So I was hoping that I can use it.

Your reply is much appreciated! I got Zigbee with CC2531 to work but with the exception of 2-3 OSRAM wall plugs, there hasn't been any use case to me. So currently i am not running Zigbee2MQTT. The CC2531 I flashed myself and it has little range just. I've got two questions to you: The transreceiver ...

Hello, Last week I reinstalled Domoticz, imported the existing DB and installed again latest MQTT Plugin for Shelly (https://github.com/enesbcs/Shelly_MQTT). I just received a Shelly Pro 4 PM which according to the compatibility list is supported by the MQTT plugin. But buttons and power indicators ...

Dear Community, I've been using Domoticz for years. All windows and doors have door contacts and all rooms have temperature and humidity sensors. Those devices are from Xiaomi (Not Aquara), using Mi Gate connected to Domoticz. I just found that is is no longer possible to obtain the LAN access ...

Hello @ChrisVH1982, You wrote: So I am wondering how I can create one button for my ceiling fan and create up to 9 functions / actions as shown in the screenshot attached but like (1 | 2 | 3 | Light | OFF ...) Just to verify. Are you asking how to create a virtual Selector Switch? An example see ...

Apologies if my question is too obvious. Maybe I am missing the right keywords required to find the answer myself. My ceiling fan can be remote controlled using a 433 Mhz. The 433 Mhz transreceiver, which is attached to Domoticz, was able to learn and replicate the signals. So for testing I created ...

Dear community,

I've been struggling with getting user accounts to work. When creating an account, login keeps failing until restart Domoticz service (sudo /etc/init.d/domoticz.sh restart).

Is that normal?! It took me quite a while to figure this out .

Hello,

I want to switch on the light for one minute using a PIR but only after sunset and before sunrise. How can I acconplish that?

Thank you. I will instead use a switch command to switch on a virtual switch instead. That works out fine!