An update, continued on 2020 and downgraded HomeBridge to an earlier version, that actually solved the problem with the connection to my Homekit. Unfortunately some devices where missing and I couldn't get them to show up so I had to revert to Domoticz 4.10717.

It's a shame as I liked 2020 better

Hello, No i meant disabling MQTT in the eDomoticz plugin. In Domoticz under the hardware tab it must remain enabled. Just go into the Homebridge Gui-Select plugins-Find the eDomoticz plugin, click settings->advanced and disable MQTT. Hi, I don't have the GUI installed, can I do this elsewhere ...

Hi, I am suffering from an upgrade to 2020 that went wrong, and at this point I am uncertain if I can use 2020 as I struggle to see if I can get Homebridge to work again. So, I have a SD-card three months old, with that I am now using, with 4.10717, and that works well, except that I have added a ...

Thanks for this, I disabled MWTT from the GUI, under the Hardware tab, is that what you mean, in that case I see no difference? To be clear, in the Home app I get no response from any device. As I understand it rebuilding from scratch, on a new memory card, wont avoid these issues? And if the above ...

Hi, Start separate thread on my Homebridge issues, appreciate any help. After Domoticz upgrade, including OS to Buster, Homebridge stopped working. Have tried upgrading and reinstalling but no difference. Can the below out put give any clues to resolution? Thanks in advance pi@domrasp:~ $ homebridge ...

Trying to update Plugin but get:

"error: Your local changes to the following files would be overwritten by merge:
plugin.py
Please, commit your changes or stash them before you can merge."

Any suggestions?

Thanks, I now have 3.5.2 and ShellyMQTT shows up in the list.

I am planning to use Shelly 2 LED, have anyone tried this with the plugin?

I have an issue trying to install this, I have the MQTT part working but have an issue with Python. From command line python3 -v gives Python 3.4.2 as result, but in Domoticz about I see this: Version: 4.10717 Build Hash: b38b49e5 Compile Date: 2019-05-09 13:04:08 dzVents Version: 2.4.19 Python ...

This is now resolved, the answer was found in the below linked support document, NOT in the manual. See section "Utilizing Key Fob Gen5 as a Scene Mode Controller (Scene Activation Command Class)." and make sure you get the FOB into Scene Mode https://aeotec.freshdesk.com/support/solutions/articles ...

Have included the Key Fob, shows up in the list, switch the fob to use mode but after this nothing. Even if I press the buttons there is no change in Domoticz, meaing the "last seen" is not changing and only 1 device is added to my device list.

Anything I have missed?

Thanks

I lift this old thread as I am looking for wisdom. I have Velux blinds, controlled with the IO protocol from a remote. What I want to achieve is that they go down when my awnings goes out and I was thinking I could put a magnet contact on one of them and let Domoticz do this for me. I have found ...

Thanks, I changed to that was easy and works well!

As Weather Underground are discontinuing their service I have signed up for Accuweather, works fine but I struggle to get the correct Location Key. I am in Höllviken, Sweden, and when I use their homepage I see the code 309633 being used, when I use that in Domoticz I get data but it's not correct, ...

I have now figured out that in Swedish it works with "Activate", in Swedish "Aktivera", for scenes. What is a bit strange is that I can use my two main scenes, that also contains Swedish characters, "Tändning" and "Släckning", but the scene "Morgon" constantly returs "I don't understand" I have not ...

I have now figured out that in Swedish it works with "Activate", in Swedish "Aktivera", for scenes. What is a bit strange is that I can use my two main scenes, that also contains Swedish characters, "Tändning" and "Släckning", but the scene "Morgon" constantly returs "I don't understand" I have not b ...

Several people seem to have issues so far with Dutch - scenes not being discovered is another. I'm hoping it's teething troubles, but have raised with Google Product owner As you know Swedish was just released, do you know status of what's supported and not, in Swedish, any tricks we can re-use ...

I see some Swedish users, I am struggling to get "her" to understand anything relating to Controlicz, basically I am most interested in the Scenes, have anyone had that to work and what's the trick in that case, what do you say?

Madgeni wrote: ↑Friday 12 October 2018 15:10 Hi - do you have a subscription?

Yes, I do!

"Sync my devices" - discover devices "Hey google, turn off <device>" "Hey google, are the lights on in the <room>" "Hey google, set the <thermostat> to x" "Hey google, what's the temperature in the <room>/ of the <thermostat>" "Hey google, dim the lights" "Hey google, change the lights to <colour ...

"Sync my devices" - discover devices "Hey google, turn off <device>" "Hey google, are the lights on in the <room>" "Hey google, set the <thermostat> to x" "Hey google, what's the temperature in the <room>/ of the <thermostat>" "Hey google, dim the lights" "Hey google, change the lights to <colour ...