@FireWizard: Thanks for the confirmation.

Yes, they are independent Solar systems.

I am working on a script for the cost of my power i use. I have a p1 meter connected and i not sure if i understand the values correct. if i look at my P1 meter i Used almost 8 kWh and generated almost 6 kWh. Domo_p1.jpg But if i look at my reading on my solar panels i generated more then 11 kWh ...

Appesteijn wrote: ↑Thursday 25 January 2018 7:57 I currently don't have much spare time to work on this. I'll post here when I have an update.

Hopefully you find some time soon, because it is very annoying Android 8 is not working.

Topic can be closed...i forgot to update the gatewayESP8266 sketch with the router information. I totally forgot this sketch, i though flashing the nodeMCU was enough

I changed to new router. After this i only have problems with mySensors gateway. It will not connect. I am now lost i tried a lot of things...but i don't understand why it is not connecting. My setup is: - Domoticz v3.8394 on RPI - Mysensor node : ESP Easy NodeMCU My log is saying: 2017-09-15 23:21 ...

Looks like the problem is resolved. Script is up and running again.

anyone also experiencing issues with the call to the ohimet.com site? I am getting: 2017-08-23 20:08:01.044 LUA: curl "http://www.ogimet.com/cgi-bin/getsynop?block=06270&begin=201708231700" 2017-08-23 20:08:02.208 LUA: ogimet:Status: 501 getsynop: no se pudo conectar a la base de datos because of ...

did you already have looked into the Mysensors project ? https://www.mysensors.org/build/light-bh1750

I am using the following blocky /lua-scripts: To determine the lux value with the weatherunderground api https://www.domoticz.com/wiki/Real-time_solar_data_without_any_hardware_sensor_:_azimuth,_Altitude,_Lux_sensor... . I am also working on a mysensor project to measure my own lux-value, because ...

As you can see at the picture the measurement is taken on the same time. The measured lux value is in done in a room with windows, but with no sunlight directly into the room. I expected the calculated Lux-value to be higher but the difference is to big. I also thought about the magnitude, but if ...

based on script http://www.domoticz.com/wiki/Real-time_solar_data_without_any_hardware_sensor_:_azimuth,_Altitude,_Lux_sensor... i was using the lux value to determine if it was dark enough to put on the lights. But some rooms with no windows it is earlier dark then rooms with windows, so i started ...

Hi, Hopefully anyone can explain to my, why it is useful to have the General/Voltage (i have three of them) monitored with the P1 Meter? This has been recently been added (not sure in which version exactly) 2017-04-12 14:54:35.942 (P1 Slimme Meter USB) P1 Smart Meter (Electra) 2017-04-12 14:54:35 ...

The domofence app was running fine, till I updated my galaxy S7 to the new nougat OS. Now domofence doesnt send / trigger the off signal to the IDX in domoticz. The application itself tells me nicely : entered or exited the zones but nothing happen in the domoticz dashboard. When I test the app it ...

Wikipedia is your friend if looking for reference info , but switching on lightlevel is also a subjective matter, dependent on the activity on which you want to shed light. Yes, I found that info off course, but in a script you need just one value...and I didn't know which value I had to pick. I ...

Thank you jmleglise for all your work. A great script even though I understand absolute nothing of that calculation. I had almost bought a lux meter, but now I'm going to see if this will work in combination with my lights. Because I haven't collected any data, I was wondering what is a generally ...

Nope...I didn't change anything. Nice... a rate limit. I had not found that new option. Works great. I had not checked the checkbox for CRC validation, but if I enable this I get the following messages in my log. 2017-03-01 10:12:50.368 P1: dismiss incoming - CRC failed 2017-03-01 10:12:57.377 (P1 ...

Last sunday i updated to the beta version of Domoticz again (i was using the stable version) and i noticed that : - i am getting every second a reading from the P1 meter. (my status logs only show P1 smart Meter readings :cry: ) - i had a abnormal reading in my electra verbruik1.jpg I was curious if ...

Don't know about the gas meter. Given the dump from the 'cu' command I'd say the gas meter is not reporting it's values to the main smart meter (yet). As said: the last update time reported in the datagram is Jan 1, 1970 1:00 AM CET. Either the guy from Liander did something wrong or it needs some ...

Appesteijn wrote:Has the IDX code of your virtual switch changed?

Nope...but i changed my switch to protected and this is what it was causing.