chimit wrote: ↑Friday 29 September 2017 9:26 Thanks for the heads up. I restarted.

Thanks a lot. It is back up running now. Grate service! Appreciate the effort

Not able to access https://my.domoticz.com/ anymore. ??

Hi, I have installed a new thermostat, SRT321 in my network. It was no problem to include it. If I change set point using the wheel on the thermostat, it updates the controller immediately, but it doesn't not work the other way around, if I try to change the set point on the controller. I have ...

I have the same issue. "OpenZWave: Alarm Level: Secure" is flooding my log. Can it be that the Fibaro Motion sensor is "armed" - Not sure how to disarm it with domotics?

I contacted the manufacturer about this issue and their support was really excellent - they noticed I was still on an old firmware (1.31) and they sent me their current one (1.32). After the update all problems were solved for me, all values continue to update at the specified intervals. Hi, I am ...

Derik wrote:it this device in the openzwave list?

Doesn't looks like - may that be the reason ?

Hi, I am using this switch to measure energy on a heating device. I works perfectly for a week or two (reporting V, A and W (also KWH) before it freezes in the same voltage, ampere and wattage. Does anyone else have this switch and problem? Only way to fix it, is to exclude and include the device ...

I'm not able to get my Z-stick to work with usb hub. It's not being detected at all. (dmesg shows nothing) It works if I connect it directly to my Rpi. My RFXCOM is working on the HUB. Also my Current Cost (CP2102 USB to UART Bridge Controller) is being detected through the HUB. Any suggestions ...

Would really like to have ONVIF camera support directly in Domoticz. ONVIF (Open Network Video Interface Forum) is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products. Or in other ...

Hi, I have this CurrentCost EnviR with Netsmart Bridge: http://www.currentcost.com/product-envir.html http://www.currentcost.com/product-netsmart.html As I understand, I need to connect my CC EnviR to my Pi with USB, I then assume I need: http://www.currentcost.com/product-datacable.html Is that ...

Nautilus and JC38, thanks to both.

I don't think I will use my.currectcost anymore if Domotics works stable with my CC.
And if I miss it, I will buy a rj45 splitter.

Thanks again

Hi, I have this CurrentCost EnviR with Netsmart Bridge: http://www.currentcost.com/product-envir.html http://www.currentcost.com/product-netsmart.html As I understand, I need to connect my CC EnviR to my Pi with USB, I then assume I need: http://www.currentcost.com/product-datacable.html Is that ...

Im not able to update to any above 4836. Tried web gui, ./updatebeta and your update script. (that works, but leaves me with 4836) pi@raspberrypi ~/domoticz/scripts $ sudo uname -a Linux raspberrypi 4.1.6+ #810 PREEMPT Tue Aug 18 15:19:58 BST 2015 armv6l GNU/Linux Updating to latest beta version ...

Westcott, thanks a lot :) I found one issue with my pgrogram: tmp1, hum1, humstat1 = string.match(otherdevices_svalues['Device1'], "(%d+%.*%d*);(%d+%.*%d*);(%d+%.*%d*)") tmp1 (%d+%.*%d*) will return -1.0 as 1.0 - How can i make it to include the "-" as it is freezing outside :) ?

I agree with you for some of the devices. But for example heating devices, it would be pretty accurate to input power and also maybe average voltage. It will of course not be 100% accurate as the voltage varies, and resistance in the heating devices a bit lower when its cold. It would also work ...

Hi, trying to update from 4836 -> 4858 From gui: /home/pi/domoticz/scripts/update_domoticz: 27: /home/pi/domoticz/scripts/update_domoticz: systemctl: not found From terminal: pi@raspberrypi ~/domoticz $ ./updatebeta Updating to latest beta version... Please Standby... --2016-03-05 10:34:01-- http ...

Hi. I would like to "edit switch" and enter the power consumption (W) on the switch. Then a timer/counter that calculates kwh used for that switch. E.g. a switch with configured 1500W power consumption that's been on for 24h: 1500w x 24h = 36kwh http://i.imgur.com/POOqvgx.jpg http://i.imgur.com ...

Panser, Just a suggestion, but if it is a 'time' script, it will run every minute, so you don't need the 'if((time.min % 1)==0)then' check. Also, have you tried updating device 194 directly, rather than with json? E.g. commandArray['UpdateDevice'] = '194|0|'..tempaverage..';'..humaverage ...

Hi, I have now started to learn lua and got this working. It calculate average temp of my 5 temp sensors, and average hum of my 3 hum sensors and writes the hum stat from my sensor #1 to a virtual device. This happens once every one minute. Please excuse any "bad programming" as im a n00b. However ...

gizmocuz wrote:There is now native support for netatmo in domoticz from the hardware page
.... i'm not sure if the rain gauge is working 100%, maybe someone can look at this...
(Also big thanks to Seb)

Thanks a alot! - Works perfect!