Search found 120 matches
- Saturday 25 July 2020 12:10
- Forum: Z-Wave
- Topic: "Groups & network" not working
- Replies: 4
- Views: 988
Re: "Groups & network" not working
Now I can see them. They are seen in Firefox (but not in Chrome!!) as tabs under "Hardware"/"Setup". in Chrome the option was still seen under "node management" but didn't work. Some problem with old cache perhaps? Most likely - clear your Chrome Cache and Appcache - 2 different settings ;)
- Sunday 19 July 2020 12:37
- Forum: Z-Wave
- Topic: How to change PARAMETERS ZWAVE devices
- Replies: 2
- Views: 599
Re: How to change PARAMETERS ZWAVE devices
I would use the Zwave control panel in Domoticz itself - goto your Zwave controller - select settings - now you have a list of controlled Zwave devices - select your device and update the settings
- Friday 17 July 2020 22:43
- Forum: Z-Wave
- Topic: Fibaro FGS 224 - Not in OpenZwave
- Replies: 13
- Views: 2340
Fibaro FGS 224 - Not in OpenZwave
Hello ! Any support on this please ? So annoying not to be able to install these new Fibaro Relays... You could always try the Beta version - make a Backup of the complete Domoticz folder, install Beta and test it - if it still does not work, you could always return to the Backup version. But, I ...
- Sunday 12 July 2020 16:10
- Forum: Z-Wave
- Topic: Zwave device type UNKNOWN
- Replies: 7
- Views: 2145
Re: Zwave device type UNKNOWN
Did you try to do a Node Heal in the Zwave devices listing (under Zwave controller device, press settings) - after the Heal command you have to wake up your Device (if I am correct and it is Battery-powered)
- Tuesday 12 May 2020 21:17
- Forum: Z-Wave
- Topic: OpenZwave support for Fibaro sensor FGCD-001
- Replies: 4
- Views: 724
Re: OpenZwave support for Fibaro sensor FGCD-001
I see, the device is not handled as should - a CO2 Sensor, I checked the XML and this is correct, so I think there should be a wrong association in Domoticz Zwave control - there are a number of Forum topics about the CO2 level missing, also under 1.4, but not a solution. I will check the code - I ...
- Monday 11 May 2020 16:32
- Forum: Z-Wave
- Topic: OpenZwave support for Fibaro sensor FGCD-001
- Replies: 4
- Views: 724
OpenZwave support for Fibaro sensor FGCD-001
OpenZwave - No modifications since 02 June 2019, see Open Zwave Github searching for FGCD-001, nothing special for 1.6. So, no special actions needed, present at Domoticz OpenZwave. It is a Battery powered device? Might take a while to show up with all values, you can try to - set Allow New Hardware ...
- Thursday 07 May 2020 11:03
- Forum: Android
- Topic: Domoticz app 2.0
- Replies: 2380
- Views: 652690
Re: Domoticz app 2.0
The new app's version (0.2.213) doesn't work. I have domoticz 10717. I hope this issue will be fixed soon. In Domoticz - goto Settings - Website authentication - supply username and password and Authentication to Login Page, this should work, I am on a Beta between 4.10717 and 2020 and works like a ...
- Wednesday 06 May 2020 18:00
- Forum: Android
- Topic: Domoticz app 2.0
- Replies: 2380
- Views: 652690
Re: Domoticz app 2.0
I understand why you're not so eager to update everytime. I know the feeling, but staying too far behind will result in problems sooner or later. Maybe run a 2nd Domoticz for not compatible items (Z-Wave sometimes, ...). This is a not possible for a lot of users who still have problems with the new ...
- Wednesday 06 May 2020 17:45
- Forum: Android
- Topic: Domoticz app 2.0
- Replies: 2380
- Views: 652690
Domoticz app 2.0
Im sorry but I can't let the app work with 100 versions of Domoticz... thats really impossible for me I understand this point of view, but the previous Stable version, 4.10717 is not supported anymore (2020.2 is a bug fix update)? If so - please make a note in the New Function that are with the new ...
- Thursday 30 April 2020 11:43
- Forum: Z-Wave
- Topic: Basic Wall Controller not recognized?
- Replies: 11
- Views: 1967
Basic Wall Controller not recognized?
After contact with my reseller I excluded the device and included it again. Now it works :D It's not working perfectly if you ask me. At the hardware tab the device is shown as: Included second time.PNG --> Unknown: id=0330 Unknown: type=0300, id=a307+ There are two Devices added and both are ...
- Wednesday 29 April 2020 12:26
- Forum: Examples & Solutions
- Topic: Script to display next F1 Race
- Replies: 36
- Views: 11238
Re: Script to display next F1 Race
Hi, I hadn't noticed actually since there are no GPs in the near future :-P I think - but no time to check now - that it has to do with the upgrade to LUA 5.3 It is strange that by removing the offset you get the correct time as it is in UTC. Quick (and dirty) fix for now: Change this line: local ...
- Sunday 29 March 2020 14:26
- Forum: Z-Wave
- Topic: Error: OpenZWave: Value_Changed: Tried adding value, not succeeded!
- Replies: 5
- Views: 626
Re: Error: OpenZWave: Value_Changed: Tried adding value, not succeeded!
Indeed it is. No errors, and all the configuration settings are available. https://www.dropbox.com/s/0tw76s01yil5naa/Capture.JPG?dl=0 Looks correct to me - i checked the Open Zwave config branche and no changes since Oct 2019 in the XML so no updates since then - has this ever work correct in Open ...
- Saturday 28 March 2020 21:09
- Forum: Z-Wave
- Topic: Error: OpenZWave: Value_Changed: Tried adding value, not succeeded!
- Replies: 5
- Views: 626
Error: OpenZWave: Value_Changed: Tried adding value, not succeeded!
You use and IDlock150 how does it show in Domoticz Zwave nodes? Is it correct included?
- Tuesday 18 February 2020 13:41
- Forum: Z-Wave
- Topic: Popp Z-rain
- Replies: 15
- Views: 2610
Popp Z-rain
Yes, it should work
BTW to be precise - it is the OpenZwave 'database' which is incorporated into Domoticz.

- Sunday 16 February 2020 12:51
- Forum: Z-Wave
- Topic: Popp Z-rain
- Replies: 15
- Views: 2610
Re: Popp Z-rain
It looks like it's interpreting this device as a Switch, 1 value, opposed to it being a Sensor multi level device - 1 instance, 2 index. The module OpenZwave.cpp can not detect it as a multi level device and therefor throws this error in the specified line number. Is it Popp product code 700168? If ...
- Thursday 30 January 2020 17:26
- Forum: Z-Wave
- Topic: What is the current status of Z-Wave in the latest beta?
- Replies: 17
- Views: 2796
Re: What is the current status of Z-Wave in the latest beta?
I had one battery device for which I had to do a Refresh Node because the device was not recognized in Domoticz, but after that all works fine
- Friday 20 December 2019 17:26
- Forum: Z-Wave
- Topic: AEON Labs ZW130 Wallmote Quad+ - strange messages in log
- Replies: 0
- Views: 289
AEON Labs ZW130 Wallmote Quad+ - strange messages in log
Version: V4.1197 Platform: PI Plugin/Hardware: Zwave Description: I have a AEON Labs ZW130 Wallmote Quad+. In Beta Release V10915 this was working as designed. After upgrading to V4.1197 - Wallmote Quad is not correctly displayed in Zwave devices, Manufactor is not filled - Refresh Node Info + wake ...
- Wednesday 28 August 2019 12:34
- Forum: Z-Wave
- Topic: Manufacturer_specific.xml out of Date
- Replies: 10
- Views: 5037
Re: Manufacturer_specific.xml out of Date
With the beta update V4.11230 this morning the Out of date message is gone. But the Z-wave devices still have name Unknown. to get the right names you have to goto Hardware - Zwave - Settings, select the Node with name Unknown and press Refresh Node info (Vernieuw Node Info in Dutch) - if the Node ...
- Tuesday 27 August 2019 16:44
- Forum: Z-Wave
- Topic: Manufacturer_specific.xml out of Date
- Replies: 10
- Views: 5037
Re: Manufacturer_specific.xml out of Date
still no solution, but the range is 2 monthsPvhelden wrote:After 3 year stil no solution?
I have the same problem.
Anyone?

- Friday 23 August 2019 13:19
- Forum: Z-Wave
- Topic: Manufacturer_specific.xml out of Date
- Replies: 10
- Views: 5037
Re: Manufacturer_specific.xml out of Date
I have the same message running latest beta - it's information but I wonder if I can do something to solve the problem.