Hmm... meanwhile found out that it is already possible in Scenes!

Switch on and fill out the number of seconds at 'Off delay'.


Then it switches on, and off after x seconds. Thanks.

Hi,

Is it possible to add a 'ON for x minutes' in Scenes?

I use it often in DzVents, but unfortunately not available in the scenes.

Another 'stoll' error and Domoticz crash this evening. Although the json is correct now, and I have set all 113 counter devices with the setting: "mapping": {"item": "", "default": "0"} hoping it would write 0 instead of 'nothing'. 2024-10-01 22:44:03.500 MQTT-mapper: onMQTTPublish found weconnect ...

(The dirty fix was installing an inactive (domoticz-zigbee2mqtt-plugin) plugin) Solved the 'stoll' issue. This error is generated by Domoticz itself. https://github.com/domoticz/domoticz/issues/6083 This issue explains that the 'stoll'- error occurs when a (for instance a 113-) device is set with an ...

Although the "dirty fix" may resolve the issue (haven't tested this), this behaviour definitely seems to be a bug in the MQTT Mapper plugin. Although I'm not an experienced plugin developer by far, I'll try to see if I can spot the issue. Good to know: this doesn't happen with at least 2 other ...

That's weird! This morning (edited all counters yesterday) the spike is back!

What to do now?

Strange, as I do this via Domoticz (Domoticz has a switch for this, so there is no need to perform this action in the web interface), and this works like a charm. Made a script that does this automatically... (a few times a year) Problem existed for more than a year. Didn't matter if I switched via ...

Thanks! That procedure solved it for me. My firmware was updated to D8, that caused the counter-jump. (I'm happy with D8 because it solves the Enphase problem https://support.enphase.com/s/question/0D53m00009JkKntCAF/when-i-disable-and-later-enable-power-production-through-the-envoy-installer-web ...

As there is a waterflow device present, could the data be used to have an 'flowing line' for water on the Energy Dashboard as well? (And mention next to the line the current waterflow?

Great new feature for Domoticz!

Some (very) small cosmetic notes:

- Use W for Watt (more readable and in the same icon we use kWh also als single characters)
- The Euro-sign (€) should be before the amount (ISO convention). (Or instead use the word 'euro' after amount).

Regards, Hans

waltervl wrote: ↑Thursday 13 June 2024 23:41
...
You can also set the compare chart (last chart) to year display and it will show the logged results per year (and not default by month).
Schermafbeelding 2024-06-14 001650.png

Found it! Overlooked clicking on 'y' for years. Thanks!!

Is it possible to show an extra chart, for both P1 gas and electricity charts, just showing the total year usage per year? When choosing a new energy supplier, for price comparison, I have to submit the gas and electricity on yearly basis. Now I have to add up all 12 month manually... And it will ...

Tried the java-script method and that worked! (After allowing pop-ups in Safari :roll: ) Think that the problem is that wave-js-ui is http and my Domoticz is httpS. (Think that https with an http iframe isn't allowed. ) But solved now. Thanks! Solved by enabling httpS in the zwave-js-ui settings ...

Tried the java-script method and that worked! (After allowing pop-ups in Safari )

Think that the problem is that wave-js-ui is http and my Domoticz is httpS. (Think that https with an http iframe isn't allowed. ) But solved now. Thanks!

To wrap up once I got zwave-js-ui up&running .. * however, 'disabling' OZW, in my case, rendered its devices invisible in Domoticz. So, based on a tip in the forum, Instead of disabling OZW, I connected it to an incorrect USB port. Then the old devices remain and zwave-js-ui can still work properly ...

and for openzwavenodes the change is:

old:
../json.htm?type=openzwavenodes&idx=[controller_idx]

new:
../json.htm?type=command&param=getopenzwavenodes&idx=[controller_idx]

I've written a dzVents script for Domoticz for counting your electricity use (in Euro's) during the day. Use with 'Dynamic' provider prices (electric hourly, gas daily (6-6h)). Prices are obtained directly from Entso-E and EEX. Cost counters are updated every 5 min. Watch your realtime electricity ...

I think you could better use
instead of
because value is calculated relative to previous value. No difference in displayed flow value, but counterToday is daily set to 0 at nighttime and results in a negative flow.

Same error here. Wrote a small test plugin to reproduce. Starting Domoticz and/or starting plugin works ok, but when enabling/disabling the plugin (or press the 'update' button in Hardware section )is keeps giving the error: 2023-03-29 18:11:10.071 Error: Test: ImportError: Interpreter change ...

Request to display (when editing a switch) on the edit page, a list showing in which scenes that switch is used.

Now we have to open all scenes to see if a switch is used.