How to update RFLink firmware

433Mhz opensource Receiver & Transmitter.

Moderators: leecollings, Stuntteam

User avatar
Stuntteam
Posts: 399
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Stuntteam »

- When Domoticz starts / connects to the RFLink, it will show the version number
- You can also use "RFLink Loader" to see the version number. It will tell you when it connects to the RFLink.
- Alternatively you can use any termninal program and send the command 10;VERSION; it will then tell you the installed version.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: How to update RFLink firmware

Post by woody4165 »

Thanks!
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
Dlanor
Posts: 67
Joined: Sunday 22 March 2015 16:18
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Dlanor »

It seams firmware R42 is ready and build R43 has been started. I don't see the download link for R42. Hasn't it been released yet?
Domoticz| Zigbee | SONOFF
User avatar
Stuntteam
Posts: 399
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Stuntteam »

not yet.. but soon..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
User avatar
bizziebis
Posts: 182
Joined: Saturday 19 October 2013 14:00
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8805
Location: The Netherlands
Contact:

Re: How to update RFLink firmware

Post by bizziebis »

Do you have the source anywhere hosted on svn or Git? I only seem te be able to find an old version cloned by someone.
piokuc

Re: How to update RFLink firmware

Post by piokuc »

Good option will be add to Domoticz and RFLink option update firmware by using GUI Domoticz. As is in RFXCom. This will be very good option. Because some user has set box RFLink in very accessible place and must disconnect it from Raspberry and connect to PC.

Also good will be add option debug mode to domoticz to read code from RFLink example from new devices to send to developer to add support
User avatar
Stuntteam
Posts: 399
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Stuntteam »

Firmware updates within Domoticz might be added later. Adding new protocols has more priority at the moment.

Debug mode will not be added to Domoticz. Domoticz should be treated as normal operational platform.
If you want to experiment and debug, you either connect RFlink temporary to a PC or for less than 10 euros you could build yourself a second RFlink!
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
piokuc

Re: How to update RFLink firmware

Post by piokuc »

Ok thanks. But please think about add to domoticz update FW in future.

Wysłane z mojego Galaxy S6 za pomocą Tapatalk
User avatar
bizziebis
Posts: 182
Joined: Saturday 19 October 2013 14:00
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8805
Location: The Netherlands
Contact:

Re: How to update RFLink firmware

Post by bizziebis »

With a shell script it's possible to flash it from the raspberry itself. It's not as easy as flashing from Domoticz, but it keeps you from removing your RFLink and plugging it into your pc.
piokuc

Re: How to update RFLink firmware

Post by piokuc »

But i postulate to also RFLink can be flash as RFXCom by using GUI Domoticz...by webbrowser

Wysłane z mojego Galaxy S6 za pomocą Tapatalk
User avatar
Stuntteam
Posts: 399
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Stuntteam »

If you can organize that the duration of a day will go from 24 to 48 hours then we can get more done in a day :P
Otherwise just be patient..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
piokuc

Re: How to update RFLink firmware

Post by piokuc »

:-)

Wysłane z mojego Galaxy S6 za pomocą Tapatalk
georgesattali
Posts: 84
Joined: Saturday 05 March 2016 16:40
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: France
Contact:

Re: How to update RFLink firmware

Post by georgesattali »

@ bizziebis,
shell script !! nice !
Do you have an example or some hints ?
Thanks
NietGiftig
Posts: 121
Joined: Sunday 11 October 2015 8:50
Target OS: Raspberry Pi / ODroid
Domoticz version: V3.6224
Location: Holland
Contact:

Re: How to update RFLink firmware

Post by NietGiftig »

piokuc wrote:But i postulate to also RFLink can be flash as RFXCom by using GUI Domoticz...by webbrowser
Why don't you buy an RFXcom.
You be happy, and we have no more multiple posts from you on different forums.

So everybody happy!
RPI-2 + SSD / ESPEasy Sensors & Switches / Sonoff / RFLink / Action Switches / TP-Link switch / Node-Red / Reacticz
User avatar
Stuntteam
Posts: 399
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by Stuntteam »

I am pretty sure he would still cross post, just about a different device :P
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
User avatar
bizziebis
Posts: 182
Joined: Saturday 19 October 2013 14:00
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.8805
Location: The Netherlands
Contact:

Re: RE: Re: How to update RFLink firmware

Post by bizziebis »

georgesattali wrote:@ bizziebis,
shell script !! nice !
Do you have an example or some hints ?
Thanks
I made a small script which disables Monit, stops Domoticz and then executes the following command:

Code: Select all

sudo avrdude -v -p atmega2560 -c stk500 -P /dev/ttyACM0 -b 115200 -D -U flash:w:/home/pi/RFLink.cpp.hex:i
If you don't have Avrdude installed you must first install it

Code: Select all

sudo apt-get install Avrdude
georgesattali
Posts: 84
Joined: Saturday 05 March 2016 16:40
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: France
Contact:

Re: How to update RFLink firmware

Post by georgesattali »

Thanks for the command ! I'll try it soon. :)
htca
Posts: 21
Joined: Thursday 28 January 2016 10:32
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by htca »

Is there a location where you could download the zip besides the google link? it seems impossible to download it from the CLI (I am on a distance, so easy plugging in a USB stick with the files is not an option).
marcels
Posts: 2
Joined: Sunday 30 October 2016 10:41
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: How to update RFLink firmware

Post by marcels »

Guys, I'm having trouble updating the rflink firmware version to R44.
I used the instructions in the startpost. But although I think everything should be OK, the program button is greyed out..

The logging window shows the following information:

Code: Select all

20;00;Nodo RadioFrequencyLink V1.1;
10;version;
20;01;VER=1.1;REV=28;BUILD=000;
10;status;
20;02;CMD UNKNOWN;
Any idea's?
User avatar
Westcott
Posts: 423
Joined: Tuesday 09 December 2014 17:04
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: UK - Glos
Contact:

Re: How to update RFLink firmware

Post by Westcott »

I successfully use the method in the 3rd and 4th posts by downloading the new zip file to my Windows PC. then unpacking it and sending just the RFLink.cpp.hex file to the RPi.
You don't need to stop Domotics - simply update your RFlink device in Setup->Hardware with 'Enabled' unchecked.
Note its Port, then use it in the avrdude command.
Finally re-enable the RFlink device - the log and the Hardware device shows the version when it restarts.
Zwave - Sigma Z+ stick, Fibaro, Horstmann, Neo Coolcam, EUROtronic
RFlink - IR detectors and temperatures
Wifi - YeeLights, ESP32s, Anoop sockets
Zigbee - lots with zigbee2mqtt and ZbBridge
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests