[Plugin now available in Beta] Help with Yeelight Bulb

[Derik]

Only i do not understand the ssdp protocol? Working with putty?
Or how do i send the request.

some one understand this..?

Are you able to run a command like this?

Code: Select all

printf '{"id":1,"method":"toggle","params":[]}\r\n' > /dev/tcp/192.168.0.2/55443

change 192.168.0.2 to the IP address of your bulb. Also check that you have developer mode enabled on the bulb. The quotes may need escaping, I'd check myself but don't have a Linux install handy.

Corbin...
If you planed a hardware plugin... [ love that option..xxxx]
Only i do not understand the methode..
In my browser?
in putty?
Or in a linux [ and then? ]

Sorry for my dombo questions
Thanks

[TwoEasy]

I found another temporary way to control the bulbs. Not the most effective or smoothest way to do it but it works..

I have a old Android tablet that I use as a on the wall dashboard, always connected to a charger and always at home, connected to wifi. I have tasker installed. So I made a virtual switch in domoticz that sends a on/off message via pushbullet that my Android tablet listen for and then runs the wanted command on the wanted bulb.

Like I said, dirty, not local but It works for now I think. (not actully tested yet)

[farhanito]

Like I said, dirty, not local but It works for now I think. (not actully tested yet)

I you want local, i think this tasker plugin will work better
https://play.google.com/store/apps/deta ... .httpevent

[corbin]

Corbin...
If you planed a hardware plugin... [ love that option..xxxx]
Only i do not understand the methode..
In my browser?
in putty?
Or in a linux [ and then? ]

Sorry for my dombo questions
Thanks

try this from Linux command line (terminal)

Code: Select all

echo -ne '{"id":1,"method":"toggle","params":[]}\r\n' | nc -w1 192.168.5.19 55443

[corbin]

Any Windows Domoticz users want to test my Yeelight code?

[corbin]

https://github.com/corbinmunce/domoticz ... elight.cpp

[TwoEasy]

Oh amazing Corbin! Really awesome! Unfortunately I use Raspberry pi so I cannot test it, I can happily test it if possible on pi

[Derik]

Looks there are people that have supported the yeelight in windows domoticz....

ScreenShot035.jpg (89.29 KiB) Viewed 2610 times

[TwoEasy]

• u

Looks there are people that have supported the yeelight in windows domoticz....
ScreenShot035.jpg

Yeah, as you can see two posts up it is Corbin who created this.

[Derik]

• u

Looks there are people that have supported the yeelight in windows domoticz....
ScreenShot035.jpg

Yeah, as you can see two posts up it is Corbin who created this.

O real?

Will try a linux version... [ have bulb]
Only i do not understand the way i should use:

ScreenShot036.jpg (6.88 KiB) Viewed 2608 times

[Derik]

Did install the last Windows Beta, on my NUC

ScreenShot037.jpg (102.37 KiB) Viewed 2582 times

No Yeelight?

[corbin]

Did install the last Windows Beta, on my NUC

No Yeelight?

Derik, try this link - compiled for Windows. https://1drv.ms/f/s!AiVyh7yRnMKPgT1s4nzWDgJX7UaO

The code on github probably isn't working right now - I am rewriting it to work in Linux.

[Derik]

Did install the last Windows Beta, on my NUC

No Yeelight?

Derik, try this link - compiled for Windows. https://1drv.ms/f/s!AiVyh7yRnMKPgT1s4nzWDgJX7UaO

The code on github probably isn't working right now - I am rewriting it to work in Linux.

Did install this version on my pc.
Ad the yeelight..
Only see no thing happend?
While my light is on and visible in my lan.
What do i need to do more?

[corbin]

Have you enabled development mode on your Yeelight?

[Derik]

Have you enabled development mode on your Yeelight?

mmm

I do only have the bulb and a android app?
Is that ok?
Where can i find this mode?

[corbin]

Use the main Yeelight app, link on top right to settings

[corbin]

Yes the Android app is what I use, but the link to developer mode is only there in the main Yeelight app, it isn't in shortcuts to individual lights.

[Derik]

Got him

ScreenShot040.jpg (83.21 KiB) Viewed 2539 times

Only have a other problem..
My X64 [ windows] nuc is not working as a slave for my master.. [ endium problem or something ]

Why not in Beta Windows?

[corbin]

Got him
ScreenShot040.jpg

Only have a other problem..
My X64 [ windows] nuc is not working as a slave for my master.. [ endium problem or something ]

Why not in Beta Windows?

Awesome!

With Windows not working as a slave, yeah is to do with big/little endian - not going to work.

But, I almost have the Linux version working...

[Derik]

With Windows not working as a slave, yeah is to do with big/little endian - not going to work.

But, I almost have the Linux version working...

What is that for problem endian... [ when i run Domoticz on X86 is that better? ]

When you have linux let me now i test...[ when i have time ]

Are all Yeelights working?
Like the strips and the small bulbs?
http://www.ebay.com/itm/Original-Xiaomi ... SwHoFXs-G7


Great JOB!!!