LCD display domoticz
Moderators: leecollings, remb0
-
- Posts: 82
- Joined: Tuesday 17 September 2013 13:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.9269
- Location: The Netherlands
- Contact:
LCD display domoticz
hi
i was wondering if someone have a Touch display on the raspberry pi to control domoticz on the wall somewhere?
i would realy love it but dont know yet what LCD or TFT screen to buy and if it is possible...
Greetz Bob
i was wondering if someone have a Touch display on the raspberry pi to control domoticz on the wall somewhere?
i would realy love it but dont know yet what LCD or TFT screen to buy and if it is possible...
Greetz Bob
1X Raspberry4B : Domoticz Version 2023.1 [Linux 5.10.63-v7l+ armv7l]
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
- mbliek
- Posts: 194
- Joined: Friday 12 July 2013 14:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: the Netherlands
- Contact:
Re: LCD display domoticz
You can use an iPad connected to Domoticz via wifi and stick it to the wall.
I think it's faster then using a touch screen on a raspberry
I think it's faster then using a touch screen on a raspberry
Op zoek naar een Domoticz Start Set?
-
- Posts: 204
- Joined: Thursday 05 September 2013 15:39
- Target OS: Linux
- Domoticz version: LastBeta
- Contact:
Re: LCD display domoticz
I agree with mbliek. I returned a cheap tablet yesterday (7" Yarvik) because it was very unresponsive / etc.
I looked into the touchscreens, found a few suppliers (try Google ) but either not responding to my inquiries nor they have something in stock.
I'd go for a bit more expensive tablet if I were you. I'm gonna mount my iPad on the wall
I looked into the touchscreens, found a few suppliers (try Google ) but either not responding to my inquiries nor they have something in stock.
I'd go for a bit more expensive tablet if I were you. I'm gonna mount my iPad on the wall
homebridge, rfxcom, zwave, nest, applamp, hue, debian, apple, mysensors, netatmo, fibaro, synology, foscam, otherz
-
- Posts: 82
- Joined: Tuesday 17 September 2013 13:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.9269
- Location: The Netherlands
- Contact:
Re: LCD display domoticz
i was thinking of a little cheaper example
becose i like the security screen of domoticz and i want somewhere that i can see if all the doors are closed and all the lights are out before i go out the door
becose i like the security screen of domoticz and i want somewhere that i can see if all the doors are closed and all the lights are out before i go out the door
1X Raspberry4B : Domoticz Version 2023.1 [Linux 5.10.63-v7l+ armv7l]
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
-
- Posts: 82
- Joined: Tuesday 17 September 2013 13:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.9269
- Location: The Netherlands
- Contact:
Re: LCD display domoticz
safi78 i have the same as you but i think a ipad on the wall looks good but a little expencive
1X Raspberry4B : Domoticz Version 2023.1 [Linux 5.10.63-v7l+ armv7l]
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
-
- Posts: 82
- Joined: Tuesday 17 September 2013 13:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.9269
- Location: The Netherlands
- Contact:
Re: LCD display domoticz
damn i was checking a cheap tablet but for 39,99 euro you have a nice tablet that can display domoticz
thats cheaper than a LCD exp for the raspberry....
look @ the pricewatch
http://tweakers.net/categorie/822/table ... DFEouTlWoB
thats cheaper than a LCD exp for the raspberry....
look @ the pricewatch
http://tweakers.net/categorie/822/table ... DFEouTlWoB
1X Raspberry4B : Domoticz Version 2023.1 [Linux 5.10.63-v7l+ armv7l]
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
-
- Posts: 204
- Joined: Thursday 05 September 2013 15:39
- Target OS: Linux
- Domoticz version: LastBeta
- Contact:
Re: LCD display domoticz
Again, I tried a slightly more expensive Android tablet with capacitive screen.Trust me, it sucks. (low brightness, slow, buggy (crashes) and touchy)
Looks good on pics / on the box / probably on the wall too when it's switched off but that's about it.
And I don't agree. You can buy wall mounts for iPad, on the wall is just optional, not permanent.
99% of the time that thing is just lying around doing nothing, now it has a use.
If I need to take it with me, I take it with me, otherwise it's on the wall.
Looks good on pics / on the box / probably on the wall too when it's switched off but that's about it.
And I don't agree. You can buy wall mounts for iPad, on the wall is just optional, not permanent.
99% of the time that thing is just lying around doing nothing, now it has a use.
If I need to take it with me, I take it with me, otherwise it's on the wall.
homebridge, rfxcom, zwave, nest, applamp, hue, debian, apple, mysensors, netatmo, fibaro, synology, foscam, otherz
- mbliek
- Posts: 194
- Joined: Friday 12 July 2013 14:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: the Netherlands
- Contact:
Re: LCD display domoticz
You can get the first iPad for around 120 euro. I'm going to control my music as well with my iPad.
Op zoek naar een Domoticz Start Set?
-
- Posts: 82
- Joined: Tuesday 17 September 2013 13:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V3.9269
- Location: The Netherlands
- Contact:
Re: LCD display domoticz
thats true if you need it you pick it up from the wall and if you dont need it hang it back on the wall...
thanks for thr advice.
thanks for thr advice.
1X Raspberry4B : Domoticz Version 2023.1 [Linux 5.10.63-v7l+ armv7l]
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
1X Conbee II : 2.25.3 - 26720700
1X RFXtrx433 USB Firmware:183
1X Mysensors Gateway 1.5 -3
6X ESP8266: Tosmota firmware
Zigbee : 6 Operators, 13 Sensors
-
- Posts: 204
- Joined: Thursday 05 September 2013 15:39
- Target OS: Linux
- Domoticz version: LastBeta
- Contact:
Re: LCD display domoticz
Yeah I use something from the Apple Store (http://store.apple.com/nl/product/H6414 ... find=vogel)
I'll post a pic tommorow because my new second hand ipad 3 will arrive tommorow
I'll post a pic tommorow because my new second hand ipad 3 will arrive tommorow
homebridge, rfxcom, zwave, nest, applamp, hue, debian, apple, mysensors, netatmo, fibaro, synology, foscam, otherz
Re: LCD display domoticz
I have this on order for an arduino - it will work with the PI. You'll have to write your own driver probably:
http://www.ebay.co.uk/itm/151210041413? ... 1497.l2649
https://www.google.co.uk/search?q=raspberry+pi+spfd5408
I will be driving it wireless with logic on a VM but you get the idea.
http://www.ebay.co.uk/itm/151210041413? ... 1497.l2649
https://www.google.co.uk/search?q=raspberry+pi+spfd5408
I will be driving it wireless with logic on a VM but you get the idea.
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: LCD display domoticz
Try the asus pad 7inch...
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
-
- Posts: 82
- Joined: Friday 27 December 2013 23:29
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2.2284
- Location: Nederland, Den Bosch
- Contact:
Re: LCD display domoticz
I have a Blackberry Playbook which works fine a Domoticz controller.
The only problem with it is that the icons (or however they are called) move around the sceen to easy.
Hereby sometimes the positioning of the icons are messed up.
(think I need to setup another user for this with less user rights)
The only problem with it is that the icons (or however they are called) move around the sceen to easy.
Hereby sometimes the positioning of the icons are messed up.
(think I need to setup another user for this with less user rights)
- mbliek
- Posts: 194
- Joined: Friday 12 July 2013 14:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: the Netherlands
- Contact:
-
- Posts: 5
- Joined: Wednesday 01 January 2014 21:53
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Hampshire, UK
- Contact:
Re: LCD display domoticz
How are you guys powering your wall mounted tablets? I am still scratching my head about how to do this!
- mbliek
- Posts: 194
- Joined: Friday 12 July 2013 14:08
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: the Netherlands
- Contact:
Re: LCD display domoticz
Well, mine is in a kitchen cabinet with a wall plug behind it.
Plugged the charger into a wireless switch and let it charge every Sunday for 2 hours.
Plugged the charger into a wireless switch and let it charge every Sunday for 2 hours.
Op zoek naar een Domoticz Start Set?
Re: LCD display domoticz
I've been doing some work in a house recently that has an iPad mounted in the wall.
They use an iPort.
It looks very professional.
It uses a special ribbon charging cable that gets powered remotely I think by Cat5 cable.
http://www.iportmusic.com/products/CM
They use an iPort.
It looks very professional.
It uses a special ribbon charging cable that gets powered remotely I think by Cat5 cable.
http://www.iportmusic.com/products/CM
-
- Posts: 26
- Joined: Friday 20 December 2013 11:55
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Voorburg
- Contact:
Re: LCD display domoticz
I bought a 7" touchscreen on Ebay, it connects to a Raspberry using HDMI and USB ( for the touchpart )
On the Raspberry I installed IceWeasel ( Firefox ), I made it so IceWeasel starts automaticly and opens the Domoticz website.
This solution is more expensive than a cheap tablet ( you need the screen and a raspberry )
Alex
On the Raspberry I installed IceWeasel ( Firefox ), I made it so IceWeasel starts automaticly and opens the Domoticz website.
This solution is more expensive than a cheap tablet ( you need the screen and a raspberry )
Alex
A lot of stuff :[-)
Orange PI
Evohome with HGI-80
SmartMeter USB Cable
Solar panels
RFLINK 433 MHz
AeonLabs usb z-wave plus
My Sensors ( Lan Gateway )
Wemos sensors
Arduino sensors
Orange PI
Evohome with HGI-80
SmartMeter USB Cable
Solar panels
RFLINK 433 MHz
AeonLabs usb z-wave plus
My Sensors ( Lan Gateway )
Wemos sensors
Arduino sensors
-
- Posts: 5
- Joined: Wednesday 01 January 2014 21:53
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Hampshire, UK
- Contact:
Re: LCD display domoticz
These are seriously pricey! But I guess they look good. Cheers, but I think I will stick with my PadTab idea and bury a usb cable in the wall!!fisics wrote:I've been doing some work in a house recently that has an iPad mounted in the wall.
They use an iPort.
It looks very professional.
It uses a special ribbon charging cable that gets powered remotely I think by Cat5 cable.
http://www.iportmusic.com/products/CM
-
- Posts: 4
- Joined: Tuesday 03 December 2013 16:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: LCD display domoticz
I have a adafruit 2x16 char LCDplate mounted in a box on the wall. It has 5 input buttons on it. I haven't written the code to use it just yet but it will display temps and other statuses. It's RGB so I will display certain statuses using color. The buttons will be used to arm/disarm and to change status screens. At least that is the plan. We'll see how my phyton coding goes.
Who is online
Users browsing this forum: No registered users and 1 guest