info

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.

Moderators: leecollings, remb0

Post Reply
Artic1980
Posts: 23
Joined: Monday 25 April 2016 17:37
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

info

Post by Artic1980 »

Hello to all
I wanted to ask if there is a way to control a relay through a esp01 connected on another wifi network
Thank
woody4165
Posts: 476
Joined: Monday 14 March 2016 13:55
Target OS: Linux
Domoticz version: beta
Location: Rome, Italy
Contact:

Re: info

Post by woody4165 »

Yes, if the relay is connected to an esp that is connected to another wifi network and you have ddns on this wifi and opened the port on that router you can.
Is it secure?
Cubietruck - Linux cubietruck 4.13.16 (Debian GNU/Linux 8 (jessie)) + Domoticz + RFLink, Xiaomi Gateway, Owl USB, Yeelight Color and B/W, ESP8266, Broadlink RM2, Netatmo Thermostat
Artic1980
Posts: 23
Joined: Monday 25 April 2016 17:37
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: info

Post by Artic1980 »

so you need a dns on serves and I and a dns on the second toe on the IP network that the esp ?
right?
I need to open the gate of the house which is close to the corporate network and away from home
thank
toreandre
Posts: 91
Joined: Tuesday 19 January 2016 12:51
Target OS: -
Domoticz version:
Contact:

Re: info

Post by toreandre »

There is many ways of doing this. You can set up port forwarding in your router to direct traffic from the internett to the correct unit on your homenetwork.

You can open up your domoticz to the internett.

You can use a mqtt server.

You can set up something like Telegram to send commands to your domoticz.

You can use an android device with tasker to react on emails etc and executes the gpio on the esp.

Or you could automate the unit if possible, so you dont need to do anything from work.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest