domoticz in synology as package! Available now.

[jumbo70]

@jumbotroll

DSM5.2 5644

Hi,

The 'killall synousbmodemd' command did not help. Actually 'No process was killed'.

Any idea if the Vision or Zwave.me usb stick will give similar problem, or is this problem specific for the Aeotec gen5 stick?

kind regards,
Jumbo70

What DSM version du you have on your NAS? 4.2,4.3 or 5.2?

[jumbotroll]

@jumbotroll

DSM5.2 5644

Hi,

The 'killall synousbmodemd' command did not help. Actually 'No process was killed'.

Any idea if the Vision or Zwave.me usb stick will give similar problem, or is this problem specific for the Aeotec gen5 stick?

kind regards,
Jumbo70

What DSM version du you have on your NAS? 4.2,4.3 or 5.2?

Ok.
Can you test this version?
domoticz_88f6281-5.2_3.0.4846-7.spk with cdc-acm drivers.
Manually download and install from package center.
http://www.jadahl.com/domoticz_beta/pac ... 4846-7.spk

[G3rard]

Domoticz V3.4834 Stable.
http://www.jadahl.com/domoticz_stable/

I will keep V2.3530 a while.

Thanks jumbotroll!
Just installed 3.4834 and it's seems to be working fine.

[deennoo]

I start to move from a PI to a Syno.

Before putting all on my real syno, i made a "test" on an xpenology.

A question : what about hard drive stop ? On normal use when don't using the Nas, hard drive stop spinning.

As domoticz always write logs on DB, hard drive can't stop, is there any problème with this ?

[j0bro]

I just upgraded my Synology DS215j (armada375) to DSM 6.0-7307 (RC), backed up my Domoticz db, uninstalled Domoticz, added the http://www.jadahl.com/domoticzbeta/ package source and installed the Domoticz beta package (version 3.0.4836-7). However, it won't run and complains about libstdc++.so.6 (see below). Anything else I should do? Thanks!

Code: Select all

/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)

[Gravityz]

wanted to install the stable version but instead picked 4836.

what exiting bugs did you squash in that version compared to the 4834 version

[gizmocuz]

Have a look at:
https://github.com/domoticz/domoticz/commits/master

[Gravityz]

after installing 4836 i noticed the following(more people seem to have this problem)

Qubino ZMNHAD1 module
Temp:WORKING
kWh meter:NOT WORKING, NOT COUNTING
powermeter:WORKING
i have 2 kWh meters for qubino and both are not working.

fibaro FGD212
powermeter:WORKING
kWh meter:WORKING

Fibaro FGWPE plug
powermeter:WORKING
kWh meter:WORKING

[jumbo70]

Hi,
@jumbotroll,
Thanks for the support. Unfortunately I can't get it to work.
The aeotec stick is blinking, but does not show up in the external devices list nor do I see it as serial port within domoticz when selecting openzwave usb.
I added output of dmesg |grep usb. Maybe that might help.

PS, some other memory usb sticks pop-up immediately as external devices.

Thanks,
jumbo70

@jumbotroll

DSM5.2 5644

What DSM version du you have on your NAS? 4.2,4.3 or 5.2?

Ok.
Can you test this version?
domoticz_88f6281-5.2_3.0.4846-7.spk with cdc-acm drivers.
Manually download and install from package center.
http://www.jadahl.com/domoticz_beta/pac ... 4846-7.spk

[Pierryck]

Thanks for this package, I réally enjoy to run Domoticz on my synology.

[Vaaben]

+1 to J0bro's problem - have the exactly same Syno - and the exactly same problem

I just upgraded my Synology DS215j (armada375) to DSM 6.0-7307 (RC), backed up my Domoticz db, uninstalled Domoticz, added the http://www.jadahl.com/domoticzbeta/ package source and installed the Domoticz beta package (version 3.0.4836-7). However, it won't run and complains about libstdc++.so.6 (see below). Anything else I should do? Thanks!

[jumbotroll]

I just upgraded my Synology DS215j (armada375) to DSM 6.0-7307 (RC), backed up my Domoticz db, uninstalled Domoticz, added the http://www.jadahl.com/domoticzbeta/ package source and installed the Domoticz beta package (version 3.0.4836-7). However, it won't run and complains about libstdc++.so.6 (see below). Anything else I should do? Thanks!

Code: Select all

/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)

I have never compiled domoticz for armada375.
This is the list for DSM6.0 http://www.jadahl.com/domoticz_beta_6/i ... llist=true

[j0bro]

I just upgraded my Synology DS215j (armada375) to DSM 6.0-7307 (RC), backed up my Domoticz db, uninstalled Domoticz, added the http://www.jadahl.com/domoticzbeta/ package source and installed the Domoticz beta package (version 3.0.4836-7). However, it won't run and complains about libstdc++.so.6 (see below). Anything else I should do? Thanks!

Code: Select all

/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_thread.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_date_time.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)
/usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available (required by /usr/local/domoticz/lib/libboost_system.so.1.59.0)

I have never compiled domoticz for armada375.
This is the list for DSM6.0 http://www.jadahl.com/domoticz_beta_6/i ... llist=true

Well I have been running Domoticz for this architecture for well over a year, via the Synocommunity package but what I understand is that it isn't maintained anymore. My assumption was that my NAS was supported in this newer package version, but it seems I am out of luck.

I see you compile for armada370 already, any chance of including armada375 as well? The newer Synologies use this chipset a lot, you would make a lot of us happy [SMILING FACE WITH SMILING EYES]



Verstuurd vanaf mijn Nexus 6P met Tapatalk

[jumbotroll]

I have never compiled domoticz for armada375.
This is the list for DSM6.0 http://www.jadahl.com/domoticz_beta_6/i ... llist=true
Well I have been running Domoticz for this architecture for well over a year, via the Synocommunity package but what I understand is that it isn't maintained anymore. My assumption was that my NAS was supported in this newer package version, but it seems I am out of luck.

I see you compile for armada370 already, any chance of including armada375 as well? The newer Synologies use this chipset a lot, you would make a lot of us happy [SMILING FACE WITH SMILING EYES]

Ok, I have added toolchain and compiled for armada375 DSM 6.0 you can test.
http://www.jadahl.com/domoticz_beta_6/?arch=armada375
http://www.jadahl.com/

[j0bro]

I have never compiled domoticz for armada375.
This is the list for DSM6.0 http://www.jadahl.com/domoticz_beta_6/i ... llist=true
Well I have been running Domoticz for this architecture for well over a year, via the Synocommunity package but what I understand is that it isn't maintained anymore. My assumption was that my NAS was supported in this newer package version, but it seems I am out of luck.

I see you compile for armada370 already, any chance of including armada375 as well? The newer Synologies use this chipset a lot, you would make a lot of us happy [SMILING FACE WITH SMILING EYES]

Ok, I have added toolchain and compiled for armada375 DSM 6.0 you can test.
http://www.jadahl.com/domoticz_beta_6/?arch=armada375
http://www.jadahl.com/

Hey that's terrific! Will test and report back as soon as I get home tonight. Thanks in advance my friend!

EDIT: Everything working just fine again, thanks for your blazing fast support!

[dtech]

Hi,

Ok the synology I cannot update to the latest stable version, shall I do same magic, or wait till Jumbotroll will realize new version ?
Many thank

[Egregius]

Yes, working on a DS1513+ with DSM 6 beta with a S2 stick and rfxcom.
Moved from RPi2 to Syno because I had a new site to host there and there's builtin support for let's encrypt certificates now.
First moved my floorplan from RPi to Syno but that gived from time to time a timeout while connecting to Domoticz.
Now that everything is on the Syno it feels even faster than before

[Egregius]

Hi,

Ok the synology I cannot update to the latest stable version, shall I do same magic, or wait till Jumbotroll will realize new version ?
Many thank

Because Syno can be dangerous to update files I disabled the update check inside Domoticz and will wait for a package update from Jumbotroll.
Guess that's the safest way to keep it stable.

[dtech]

Because Syno can be dangerous to update files I disabled the update check inside Domoticz and will wait for a package update from Jumbotroll.
Guess that's the safest way to keep it stable.

This was my idea that with Synology this will not be so easy, thx for info will wait for final realize.

[jumbotroll]

Hi,

Ok the synology I cannot update to the latest stable version, shall I do same magic, or wait till Jumbotroll will realize new version ?
Many thank

What latest release/stable version do you not find?
And what issue do you have?
What NAS do you have?
What DSM version do you have?