There is no general RFXCOM-like 868Mhz transceiver available.
Z-Wave uses 868Mhz in Europe, so if you want to control Z-Wave devices you can use a Z-Wave USB stick.
868mhz
Moderators: leecollings, remb0
- bbqkees
- Posts: 407
- Joined: Sunday 17 August 2014 21:01
- Target OS: Linux
- Domoticz version: 4.1x
- Location: The Netherlands
- Contact:
Re: 868mhz
Bosch / Nefit / Buderus / Junkers / Worcester / Sieger EMS bus Wi-Fi MQTT Gateway and interface boards: https://bbqkees-electronics.nl/
- gizmocuz
- Posts: 2352
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: 868mhz
868Mhz is in the make... could take some time, and the protocols for your hardware 'might' need to be included.
But lets first wait till its finished
But lets first wait till its finished
Quality outlives Quantity!
-
- Posts: 140
- Joined: Wednesday 17 December 2014 17:30
- Target OS: Linux
- Domoticz version: V3.8650
- Location: Jyväskylä, Finland
- Contact:
Re: 868mhz
By maker of rfxtrx, rflink or someone else? Just thinking debug help and/or device donationsgizmocuz wrote:868Mhz is in the make...
LXC(x64 Ubuntu Xenial), RFXtrx433E, MySensors
- Egregius
- Posts: 2582
- Joined: Thursday 09 April 2015 12:19
- Target OS: Linux
- Domoticz version: v2024.7
- Location: Beitem, BE
- Contact:
Re: 868mhz
rfxcom
I saw it already as a new hardware device in Domoticz.
I saw it already as a new hardware device in Domoticz.
-
- Posts: 1
- Joined: Friday 18 November 2016 22:33
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: 868mhz
There is an rfxcom prototype, but not (yet) available: http://www.rfxcom.com/RFXtrx868X
- Redguy
- Posts: 33
- Joined: Saturday 19 November 2016 21:26
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Maassluis
- Contact:
Re: 868mhz
The RFLink gateway sold bij nodo-webshop.nl lets you choose which radio you connect.. (not affiliated with them, just looking into the same)
I believe rflink issuported by domoticz and is cheap to buy or easy to diy, it can handle 315, 433, 866 or 2.4g modules if i read their info correctly.
It's just an arduino mega + radio module + downloadable firmware that seems almost as powerfull as the rfxcom
I believe rflink issuported by domoticz and is cheap to buy or easy to diy, it can handle 315, 433, 866 or 2.4g modules if i read their info correctly.
It's just an arduino mega + radio module + downloadable firmware that seems almost as powerfull as the rfxcom
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: 868mhz
Is this a Zwave 868Mhz version..
Or is there a other kind of type 868Mhz protocol?
Or is there a other kind of type 868Mhz protocol?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
-
- Posts: 843
- Joined: Sunday 23 February 2014 17:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: mixed
- Location: Hengelo(Ov)/NL
- Contact:
Re: 868mhz
Many meteo Personal Weather Stations operating with 868MHz.
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
-
- Posts: 2
- Joined: Sunday 05 February 2017 18:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: 868mhz
will this also support niko easywave ?
Who is online
Users browsing this forum: No registered users and 1 guest