868mhz

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.

Moderators: leecollings, remb0

Post Reply
User avatar
bbqkees
Posts: 407
Joined: Sunday 17 August 2014 21:01
Target OS: Linux
Domoticz version: 4.1x
Location: The Netherlands
Contact:

Re: 868mhz

Post by bbqkees »

There is no general RFXCOM-like 868Mhz transceiver available.

Z-Wave uses 868Mhz in Europe, so if you want to control Z-Wave devices you can use a Z-Wave USB stick.
Bosch / Nefit / Buderus / Junkers / Worcester / Sieger EMS bus Wi-Fi MQTT Gateway and interface boards: https://bbqkees-electronics.nl/
User avatar
gizmocuz
Posts: 2352
Joined: Thursday 11 July 2013 18:59
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Top of the world
Contact:

Re: 868mhz

Post by gizmocuz »

868Mhz is in the make... could take some time, and the protocols for your hardware 'might' need to be included.
But lets first wait till its finished
Quality outlives Quantity!
pj-r
Posts: 140
Joined: Wednesday 17 December 2014 17:30
Target OS: Linux
Domoticz version: V3.8650
Location: Jyväskylä, Finland
Contact:

Re: 868mhz

Post by pj-r »

gizmocuz wrote:868Mhz is in the make...
By maker of rfxtrx, rflink or someone else? Just thinking debug help and/or device donations ;)
LXC(x64 Ubuntu Xenial), RFXtrx433E, MySensors
User avatar
Egregius
Posts: 2582
Joined: Thursday 09 April 2015 12:19
Target OS: Linux
Domoticz version: v2024.7
Location: Beitem, BE
Contact:

Re: 868mhz

Post by Egregius »

rfxcom
I saw it already as a new hardware device in Domoticz.
Laars
Posts: 1
Joined: Friday 18 November 2016 22:33
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: 868mhz

Post by Laars »

There is an rfxcom prototype, but not (yet) available: http://www.rfxcom.com/RFXtrx868X
User avatar
Redguy
Posts: 33
Joined: Saturday 19 November 2016 21:26
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.5877
Location: Maassluis
Contact:

Re: 868mhz

Post by Redguy »

The RFLink gateway sold bij nodo-webshop.nl lets you choose which radio you connect.. (not affiliated with them, just looking into the same)

I believe rflink issuported by domoticz and is cheap to buy or easy to diy, it can handle 315, 433, 866 or 2.4g modules if i read their info correctly.

It's just an arduino mega + radio module + downloadable firmware that seems almost as powerfull as the rfxcom
Derik
Posts: 1601
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: 868mhz

Post by Derik »

Is this a Zwave 868Mhz version..
Or is there a other kind of type 868Mhz protocol?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
Toulon7559
Posts: 843
Joined: Sunday 23 February 2014 17:56
Target OS: Raspberry Pi / ODroid
Domoticz version: mixed
Location: Hengelo(Ov)/NL
Contact:

Re: 868mhz

Post by Toulon7559 »

Many meteo Personal Weather Stations operating with 868MHz.
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
JosEikhout
Posts: 2
Joined: Sunday 05 February 2017 18:25
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: 868mhz

Post by JosEikhout »

will this also support niko easywave ?
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest